GE Healthcare GP200304 Vscan Air Charger User Manual
- June 9, 2024
- GE Healthcare
Table of Contents
GE Healthcare GP200304 Vscan Air Charger
Overview
The Vscan Air Charger is specifically designed to charge the Vscan Air probe
Signal Indicator
| Indicator | Status |
|---|---|
| Solid BLUE for 3 seconds, then off. | Power on, not charging. |
| Solid BLUE. | Charging. |
| Flashing BLUE. | Foreign metals detected. |
Cautions
- Do not place any foreign materials, such as metal objects, magnets, and magnetic stripe cards between the Vscan Air probe and the charger.
- Use this charger in an ambient temperature between 0°C ~ 40°C.
- Do not disassemble the charger.
- Use original or certified cable and charger for safe charging.
- Keep a distance of at least 20 cm (7.88 inches) between implanted medical devices (pacemakers, cochlear implants, etc.) and this charger, to avoid potential interference with the medical devices.
Charging instruction
- Place the probe on top of the charger pad as shown to start charging. The charger pad’s LED indicator lights solid blue during charging. The probe indicator also lights up.
- Once the charging is completed, the probe indicator turns off.
Product Information
- Product name: Vscan Air Charger
- Model: GP200304
- Manufactured for: GE Healthcare India
- Address: Odyssey Building 3rd Floor Wing A, EPIP 122 (Phase II), Whitefield Road John F. Welch Technology Center, Hoodi Village, Bengaluru, State-Karnataka, India.
- Pincode-560066
- Manufacturer: BizLink (Kunshan) Co., Ltd.
Specifications
| Input | 5V ⎓ 2.1A |
|---|---|
| Output | 5W |
| Size | 147.3 x 78.3 x 21.4 mm / 5.8 x 3.1 x 0.8 inch |
| Weight | 123 g / 4.3 oz |
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate
this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. This device and its
antenna(s) must not be co-located or operating in conjunction with any other
antenna or transmitter.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
For Canada
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
IC Radiation Exposure Statement
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Compliance with 2014/53/EU Radio Equipment Directive (RED)
In accordance with Article 10.8(a) and 10.8(b) of the RED, the following table
provides information on the frequency bands used and the maximum RF transmit
power of the product for sale in the EU:
| Frequency range | Max. Transmit Power |
|---|---|
| 112-205 kHz | -7.05 dBuA/m |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>