RED SHED 1965570 Black Metal Solar Lamp Instruction Manual
- June 9, 2024
- RED SHED
Table of Contents
RED SHED 1965570 Black Metal Solar Lamp
Please read the instructions thoroughly prior to installation, then store in a safe place for future reference.
FEATURES
- Solar lamp head with pivot to adjust the light angle.
- Solar panel with 10 feet (3m) of wire.
- One light bulb includes 12 ultra bright LEDs.
- Automatically turns on at dusk and lasts for 8 hours.
Parts List
Installation of the Solar Panel
Use a power drill (not included) to create the holes on your chosen mounting
surface. Use 6 of the included wall plugs (F) and 6 longer mounting screws (D)
to fasten the solar panel to the surface.
Note: Recommended tools: Power drill or screwdriver.
Ensure your solar panel is placed so that its exposure to the sun is optimized. Be aware of objects such as trees or property overhangs that may impede the panel’s ability to generate a charge.
The angle of the solar panel can be adjusted utilizing the pivot point where the solar panel attaches to the bracket. This allows you to maximize sun exposure.
Installation of the Lamp
Place the bracket (C) on your chosen surface and use 2 longer mounting screws (D) to mount the bracket (C). The base of the light fixture mounts onto this bracket and is secured using the two small included mounting screws (E).
Note: The lamp has a pivot point, this allows the light to be angled to illuminate a surface. Once the desired angle Is achieved, tighten the twist dial to fix the light in position.
Operating the Solar Light
Connect the solar panel and cable to the light fixture. Make sure that the rotation is intact, and then flip the switch on. This will allow the light to begin operation.
Note: The switch is located on the back of solar panel.
The solar light will only illuminate when the solar panel is in darkness. You
can test if the light is operating correctly by pressing the switch button and
covering the solar panel. The light should illuminate. lf this process fails
to illuminate the bulb, press the switch button again and re- test. lf once
again the light fails to illuminate, charge for at least 8 hours before using,
the light will automatically last for 8 hours after sunset.
Battery Replacement
Should you need to replace the light’s batteries, unscrew the 4 screws in the
back of solar panel. Remove the spent batteries and replace with 2 identical
type of rechargeable battery. When replacing the batteries, observe the
correct polarity and match the battery specifications with the batteries you
have removed.
BATTERY: 2 x 18650 3.7V/2000mAh (lithium-ion rechargeable battery)
Battery Warning
When replacing the batteries for the solar lamp, be sure to:
- Use rechargeable batteries only.
- Match the replacement battery specifications with the batteries that have been removed.
- Observe the correct polarity (+ and -) when installing the replacement batteries.
- Do not mix old and new batteries.
- Do not mix alkaline, standard (carbon zinc) or rechargeable (nickel-cadmium or nickel-metal hydride, etc.) batteries.
- Contains lithium-ion battery.
- Battery must be recycled or disposed of properly.
Safety Information
- Your solar lamp is not a toy. Keep it out of reach of small children.
- Your solar lamp must be installed in a dry environment.
- Your weather-resistant solar panel must be installed outdoors to receive direct light from the sun.
- lf using a step ladder, you may require a second person to help install the solar lamp.
- Prior to installation, lay out all components to ensure they correspond to the parts diagram on page 2.
- Never look directly into the solar lamp when illuminated.
Care & Maintenance
- From time to time, ensure the plug between the solar panel and light is securely connected.
- It is advisable to adjust the angle of the solar panel to optimize the exposure of the sun during the winter months.
- The solar panel should be cleaned with a damp cotton cloth on a regular basis. This will ensure optimal performance and battery charging. Periodically, utilize the same technique to clean the solar lamp.
- Never let any abrasive material come into contact with the solar panel.
Distributed by TRACTOR SUPPLY COMPANY 5401 Virginia Way, Brentwood TN 37027
For customer support call
1-888-376-9601
www.TractorSupply.com
MADE IN CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>