DELABIE 6624 Wall Mounted Hair Dryer with Plug for Shavers User Manual

June 9, 2024
DELABIE

DELABIE 6624 Wall Mounted Hair Dryer with Plug for Shavers

DELABIE-6624-Wall-Mounted-Hair-Dryer-with-Plug-for-Shavers-
PRO

OPERATION

DELABIE-6624-Wall-Mounted-Hair-Dryer-with-Plug-for-
Shavers-1

  • Make sure switch 1 (Fig. A) on the hair dryer cradle is switched to the ‘ON’ position.
  • Select the drying temperature using the switch at the back of the hair dryer handle 2.
  • The hair dryer will operate when button 3 on the front of the hair dryer is pressed. Release button 3 to stop the hair dryer.
  • The cradle for this model has a 230V and 110V socket which should only be used for electrical shavers or electrical epilators.
  • Switch to the ‘OFF’ position 1 and unplug the mains supply after every use.
  • Power supply: 1200W, 220-240V~ / 50-60Hz.
  • Do not use the appliance near bathtubs, showers, wash basins or any other water source.

INSTALLATION – CONNECTING THE ELECTRICITY

  • Electrical supply 220-240V / 50-60Hz Class II.
  • The installation must conform to current legislation in your country.
  • Install a 30mA differential circuit breaker to provide additional protection.
  • Drill 2 holes Ø6 in the wall as shown in Fig. B.
  • Insert 2 rawl plugs 7 (Fig. A) into the holes in the wall.
  • Fasten bracket 4 (Fig. A) to the upper hole. Mount the hair dryer cradle on the bracket then tighten screw 5 (Fig. A) through the lower hole. Cover the hole with cap 6 (Fig. A).
  • Connect the power supply and switch to the ‘ON’ position to use the hair dryer.

REMEMBER

  • Our products must be installed by professional installers in accordance with current regulations and recommendations in your country.
  • In case of malfunction, immediately switch off the power supply and contact the After Sales team.
  • Do not cover and do not obstruct the air vents or outlet.
  • Check that the air vents are clean and free from dust and/or hair.
  • If the hair dryer overheats it will stop automatically and re-start after several minutes.
  • Do not shake the hair dryer.
  • Hold the hair dryer approximately 10cm from the hair to prevent any risk of burning.
  • Do not install the hair dryer outdoors.

USE

  • Connection and use must conform to these guidelines.
  • Do not connect the appliance to the mains supply if the power cable or appliance show visible signs of damage. If the power cable is defective it must be replaced by a qualified electrician to avoid hazardous situations.
  • Keep the appliance out of the reach of children.
  • This product is not designed for use by children or people with physical or mental disabilities, unless supervised by a responsible person who can provide instructions for its proper use.
  • Do not use the appliance with wet or damp hands.

MAINTENANCE AND CLEANING

  • The switch 1 (Fig. A) must be in the ‘OFF’ position during cleaning and maintenance.
  • Clean with a soft cloth.
  • Do not use abrasive scouring powder or any chlorine, acid or alcohol based cleaning products.

Product conforms to current European Directives.

After Sales Care Support:
For the UK market only:
Tel. 01491 821 821
email: technical@delabie.co.uk
The installation guide is available on: www.delabie.co.uk
For all other markets:
Tel. +33 (0)3 22 60 22 74
email: sav@delabie.fr
The installation guide is available on: www.delabie.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals