Neesolo BKH607S Kids Wireless Headphones User Manual

June 9, 2024
Neesolo

BKH607S Kids Wireless Headphones
User Manual

Packages

Diagram

Neesolo BKH607S Kids Wireless Headphones - 2

Power On/Off

  1. Power ON: Press and hold the ” ►If for 2s, the blue light will on and then goes out, you will hear a voice prompt “power on”.

  2. P ower OFF Press and hold the ” ►. for Ss, the red light will on for is and then goes out, you will hear a voice prompt “power off “.

  3. With your headphones powered off, press and hold the MFB until the red and blue lights flash alternately to enter the pairing mode, and then you will hear a voice prompt “Pairing”.

  4. Enable the Bluetooth feature of your cellphone and find “BKH607S” to connect. Once paired, you will hear “Connected”.

Answer / Hang up / Redial / Reject a call

Neesolo BKH607S Kids Wireless Headphones - 5

Volume Control / Music Control

Neesolo BKH607S Kids Wireless Headphones - 6

Clear Paring Record

Neesolo BKH607S Kids Wireless Headphones - 7

With your headphones powered on,press and hold the ” + ” and ” – “buttons simultaneously for Ss,until the red and blue light flashes 3 times and the headphones will re-enter into paring mode.

Charging Indications

Neesolo BKH607S Kids Wireless Headphones - 8

  1. In charging: red light stays on
  2. Full Charge: blue light stays on ( charging for 2 hours)

Bluetooth Indicator Light & Voice Indication

State Indicator Light Voice Indication
Power on Blue light stays on for is Power on
Power off Red light stays on for is and turns off Power off
Pairing Mode Red and blue light flashes alternatively Pairing
Bluetooth Connected Connected
Bluetooth Disconnection Disconnected
In Charging Red light stays on in charging, blue light stays on in full
charge

After-Sale Service
headphone.distri@gmail.com

FCC STATEMENT

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference. and
  2. this device must accept any interference received. including interference that may cause undesired operation.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals