sensata AP1 SmartWitness Video Telematics User Guide

AP1 Smart Witness Video Telematics
User Guide

AP1 Smart Witness Video Telematics

Please read this entire guide before installation and use.

https://qrco.de/bcE4Ne
Version 2
Last updated 8/12/2022

AP1
USER GUIDE

PACKAGE CONTENTS

KEY FUNCTIONS

Automatic Booting
Once the AP1 has been wired to your OBDII port or vehicle power source, the AP1 will boot up automatically. It will take around 55 seconds for the unit to be ready to  operate.

1. VIDEO RECORDING
   Continuous Record
   This is the default mode for recording. Your AP1 begins recording after booting up and continues to record the entire time the device is on. In this mode, the microSD  card storage may fill up quicker and overwrite your oldest recordings when it’s full. The resolution and frame rates can be set as per your requirements.
   Event Record
   The unit will record when triggered by impact, various configurable driving events (e.g., speeding or forward collision) or events triggered by the “Panic” (Rec) button.
   You can set the record time during the calibration setting mode.
   Dual Record, Continuous + Event
   Continuous record files will be stored in the “Normal” folder, and event record files will be stored in the “Event” folder on the microSD card.
   Drive Data
   DRV data (drive data) will record driving information regardless of events. DRV files consist of GPS, G-sensor, ADAS and OBD data. DRV files overwrite your device’s  oldest data. DRV files upload to the server every 10 minutes by default but can increase to every minute.
   Time and Date
   This information will be provided by GPS satellites automatically.

2. WI-FI
   To connect to the device via Wi-Fi, please press the “multifunction” button and hold for 5 seconds (long press), wait 3 seconds and then connect directly to the AP1 via Wi-Fi using your mobile device.

3. VOLUME CONTROL
   Please press the volume button to control. The volume level is 1 to 5.

ADAS FUNCTIONS

Lane Departure Warning
Your vehicle crosses a solid lane line on either side of the road.

Forward Collision Warning
Your vehicle is likely to collide with something in front of the vehicle.

Headway Monitoring Warning
Your vehicle is not maintaining a safe distance with the vehicle in front of you (tailgating).
Caution
ADAS functionality is not a substitute for an alert, trained and engaged driver. ADAS functionality will be impaired by many things, including but not limited to device  malfunction, obstruction of the device’s image sensor, intense weather conditions that reduce the visibility afforded to the device’s image sensor, and poor and/or faded road and lane striping/markings.

DRIVER SAFETY WARNINGS

DISCLAIMER
The AP1 is not a substitute for a safe, conscientious driver. The AP1 cannot compensate for a driver who is distracted, inattentive or impaired by fatigue, drugs or alcohol.  Whether or not the AP1 is in use, it is always the driver’s responsibility to take appropriate corrective action. It does not eliminate or decrease the need for a driver to stay alert  and to obey all traffic laws while operating a vehicle. Never wait for the device to provide a warning before taking measures to avoid an accident. Failure to do so can  result in serious personal injury or death or severe property damage.
Always, it is the driver’s responsibility to:

• Use safe driving techniques
• Exercise proper judgment
• Maintain a safe speed and distance between vehicles
• Take measures to avoid an accident
• Comply with all applicable laws and regulations

The driver and front passenger must always be correctly seated with seat belts fastened when operating the vehicle to reduce the potential danger of injuries.

OPERATIONAL CONCERNS
In certain conditions, including inclement weather, low visibility and certain road conditions (including poor lane markings, construction zones, dirt roads, heavy or  complicated traffic, and curvy and winding roads), the AP1 may have limited to no functionality. The AP1 may not detect certain objects such as motorcyclists, bicyclists or  pedestrians even in the most ideal conditions. Always keep the lens and view of the AP1 unobstructed and properly calibrated so as not to inhibit function. Driving in certain  conditions or any interference with the AP1 can result in false, few or no warnings. The driver must always monitor traffic and surroundings and take measures to avoid an accident; failure to do so can result in serious personal injury or death or severe property damage.

If the AP1 is not functioning properly at any time, please contact your distributor or visit support.smartwitness.com and have the device inspected immediately to correct the issue. Whether or not the AP1 is functioning, it is the driver’s responsibility to maintain vehicle control; failure to do so can result in serious personal injury or death or severe property damage.
CLEANING ADVISORY
While cleaning the device or the vehicle cab, do not apply compressed air or cleaning solutions (such as Windex) to the AP1 device. Usage of these products may cause damage to the device.

GPS RECEPTION

When satellites don’t have line of sight, cellular towers help triangulate a vehicle’s location.

IMPROVE YOUR SIGNAL

1. Activate your AP1 in an area without large buildings.
2. The optimum operating temperature for your vehicle’s GPS is -10°C~50°C
3. When first using your AP1 or turning it on after a period (>3 days), allow more time to recognize your current location.
4. This product supports Assisted GPS.

RECEPTION MAY BE IMPAIRED:

1. If your vehicle has metallic elements on the windshields.

2. If you install equipment generating electromagnetic waves that interfere with the GPS signal in the vehicle (ex: Other GPS devices like certain wireless activated alarms,  MP3 and CD players and camera alarms use GPS.)

3. On heavily overcast or cloudy days if the vehicle is:
   • In a covered place such as under a bridge or raised roadway
   • In a tunnel
   • In an underground roadway or a parking area
   • Inside a building or garage
   • Surrounded by high-rise buildings

4. If GPS signal reception is poor. It may take longer to locate your current position when the vehicle is moving than when it’s stationary.

LEDs & BUZZER SPECIFICATIONS

*Flashing (On and off):* 500msec on and 500msec off
Fast flashing (On and off):** 100msec on and 100msec off
*Slow flashing (On and off): 1,000msec on and 1,000msec off

TECHNICAL SPECIFICATIONS

AP1 Technical Specifications

Image Sensor| 1/2.9 Inch CMOS Image Sensor
Angle of View| FOV(D) 128°

ADAS Event Types

| – Headway Monitoring Warning (Tailgating)
– Forward Collision Warning
– Lane Departure Warning
Wireless| US| LTE CAT4: B2, B4, B5, B7, B12, B13, B25, B26
3G Bands: B1, B2, B5, B8
EMEA| LTE CAT4: B1, B2, B3, B5, B7, B8, B20, B28A
3G Bands: B1, B2, B5, B8
Wi-Fi: IEEE 802.11a/b/g/n
Bluetooth: BT4.2 (BR/EDR+BLE)
Antenna| LTE Main, LTE DRX, GNSS, Wi-Fi/BT
SIM| Nano SIM (4FF)
Video Resolution| Up to 1080p
Recording Speed| Up to 30FPS (Max 15FPS@1080p)
Recording Mode| Continuous, Event, Dual Mode
Memory| 8GB eMMC+1GB LPDDR3 SDRAM, Up to 128GB MicroSD
GNSS| GPS/GLONASS/Badious, Support A-GPS
G-Sensor| Digital, Tri-Axial Acceleration Sensor
Speaker| 23 pi, 8 ohm, 88dB
Audio Amp| D-Class, 879mW, 4.2V/8 ohm
Mic| MEMS, -42dBV, 59dBA SNR
Micro USB| Yes
Supercapacitor| 2.7V/7F
AP| ARM Cortex A7 Quad-Core@1.1GHz(MSM8909)
GPU| Adreno 304
Input| OBDII DC 10V~32V, 2A
Output| DC 5V, 3A
Power Consumption| Max. 750mA/12V (9.0W)
Size/Weight| 122 x 95.5 x 15.5 mm / 212g
Operational Temperature| -20°C~65°C
Warranty| Lifetime; Current Customers with an Active Subscription to Smart Witness Web Services

INSTALLATION RESOURCES

The AP1 is a self-install device for a vehicle’s OBDII connection. Please reference the AP1 install material and find access to the AP1 Mobile App on https://smartwitness.com/ap1-setup.
If you need to schedule a fee-based professional installation service, please contact smartwitness.com/request-install and submit the online form.

https://qrco.de/bcE4Ne

Download the Calibration Tool

|
---|---
http://qr.w69b.com/g/pTQjQ5Zo4| http://qr.w69b.com/g/uOj8pNR1C

MOBILE APPLICATION USER GUIDE

The AP1 Calibration Tool allows customization of AP1 settings on either Apple or Android devices. If you have installed AP1s, are familiar with its settings or require specific  changes, use Advanced Setup. Adhere to the Guided Setup in any other case.
The following features the AP1 Tool Advanced Setup.
Find Guided Setup instructions in the Quick Start Guide. STEP 1
Turn on your vehicle. Wait for the AP1 to boot up.
You will see the following LED sequence: Blinking red; red and green; green; green and blue.
All 3 LEDs solid = ready.
Note: A blinking blue light means your device is attempting to establish a network connection. If these persists, contact your service provider.

STEP 2
Press the middle button for 5 seconds. Wait 3 seconds. The orange LED light will start blinking. Now, open the Calibration Tool.

STEP 3
Choose Advanced Setup. Notice the buttons  these offer clarification and supplemental process details. To connect the app to your AP1, select Go to your Wi-Fi Settings.
STEP 4
In your settings, tap the AP1 Wi-Fi name (AP1****). The Wi-Fi password is the last 8 digits of your IMEI #, found either on the camera or the box label.

STEP 5
Tap Connect to Camera.
If you’ve established a Wi-Fi connection with the camera“Connection Status: Connected” will appear at the top of the screen. Before adjusting settings, select Download Settings From Camera. After receiving confirmation, tap OK.

STEP 6
Tap Adjust Settings/Preferences to open the Settings page. Make setting adjustments in each section as needed.
Important: Ensure you use precise vehicle measurements in ADAS settings, as exact values are crucial to its function. Similarly, mark “Horizon” and “Hood” lines properly.

STEP 7
After adjusting settings, navigate back to the Main Menu and tap Upload Settings to Camera. When prompted, tap Yes to continue. If the upload is successful, you’ll see a
confirmation message. Tap OK. You have completed calibration. Your AP1 will reboot and incorporate your new settings.
Important: Please ensure you maintain regular  updates with your AP1 to ensure it runs on the most recently released firmware.

TECHNICAL SUPPORT & WARRANTY

TECHNICAL SUPPORT
For technical support, please contact your local distributor or visit our Support Portal and submit a support ticket.
You can also email us at support@smartwitness.com or call our support team:
North America, South America, APAC
+1 312-981-8774
EMEA
+44 (0) 1483 397005
LIMITED WARRANTY
This product is supplied separately with a 2-year limited hardware warranty.
The warranty excludes products that have been misused (including accidental damage) and damage caused by normal wear and tear. In the unlikely event that you encounter a  problem with this product, it should be returned to the place of purchase.

SAFETY ADVICE & FCC REGULATIONS

FCC Part 15.19
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this  device must accept any interference received, including interference that may cause undesired operation.
FCC Part 15.21
Any changes or modifications (including the antennas) to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF Radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating  in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.

Caution
To reduce the risk of electric shock, do not remove cover. No user-serviceable parts inside. Refer servicing to qualified service personnel.
Please make sure you follow the safety advice/instructions given in the user guide.
Caution
Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Battery for real-time clock (RTC) inside.
Caution
Install the product where it does not block driver’s visibility and where there is no air bag installed. This could cause an accident or might injure passengers in case of accident.
WARNING:
To prevent fire or electric shock hazard, do not expose this appliance to rain or moisture.

Caution
Damages due to production malfunction, loss of data or other damages occurring while using this product shall not be the responsibility of the manufacturer. Although the  product is a device used for recording videos, the product may not save all videos in the case of a malfunction. In the case of an accident, the sensor may not recognize the  shock when the impact is light, and as a result, it may not begin recording automatically.

Caution
Damages due to production malfunction, loss of data or other damages occurring while using this product shall not be the responsibility of the manufacturer. Although the  product is a device used for recording videos, the product may not save all videos in the case of a malfunction. In the case of an accident, the sensor may not recognize the  shock when the impact is light, and as a result, it may not begin recording automatically.

AP1
ADAS DISCLAIMER

To properly activate and utilize AP1’s ADAS features, Sensate | Smart Witness recommends installation using OBDII data or JBUS connection. Vehicle- sourced speed data  retrieval through these means is integral to accessing vehicle speed for precise ADAS notifications.
For installations (ex: 3-Wire) without vehicle data retrieval or in instances where speed is unobtainable from the vehicle, AP1 defaults to GPS speed measurement in the  operation of ADAS features. In this case, vehicles must surpass a speed threshold to trigger ADAS functions. This threshold
is distinct from other speed thresholds used to configure ADAS events. Please contact your Smart Witness | Sensate integration team to learn about specific values for  different event types. Below these thresholds, and in cases where vehicles without vehicle-sourced speed data encounter GPS signal “dead zones” like parking garages and  highway tunnels, loss of ADAS function is expected.
If you enable ADAS features on an AP1, you assume full responsibility and indemnify Sensate | Smart Witness for  any incidents directly correlated with ADAS efficacy, malfunction or delays.

© 2022 Smart Witness. All Rights Reserved.
smw3270-7-NA_0922

References

• Telematics & Data Analytics | Sensata INSIGHTS
• Knowledge Base
• AP1 Setup | Sensata INSIGHTS

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>