HID Global iClass Credentials Smart Card Instructions

HID Global iClass Credentials Smart Card

iCLASS Memory Size and Allocation (Select one option)

• O – 2k Bits (256 Bytes) with 2 Application Areas
• 3 – 32k Bits (4K Bytes) Application areas 16k/2+16k/1
• 4 – 32k Bits (4K Bytes) Application areas 16k/16+16k/1

iCLASS Programming (Select one option)

• HP – Programmed with Security Identity Object (SI0)
  and standard iCLASS Access Control Application (Recommended)1

• P – Programmed with standard iCLASS Access Control Application

• C – Unprogrammed, for use with iCLASS SE Encoder

Front Packaging (Select one option)

• G – Plain White with Gloss Finish
• C – Custom Artwork with Gloss Finish – Specify Custom Artwork Number2

Back Packaging (Select one option)

• G – Plain White with Gloss Finish3
• C – Custom Artwork with Gloss Finish – Specify Custom Artwork Number2
• 1 – Plain White with Gloss Finish with Magnetic Stripe3
• 3 – Custom Artwork with Gloss Finish with Magnetic Stripe – Specify Custom Artwork Number2

Card Numbering4 (Select one option)

• M – Sequential Matching Encoded/Printed ( lnkjetted)8
• N – No Printed Card Numbering
• S – Sequential Encoded/Sequential Non-Matching Printed ( lnkjetted)7
• R – Random Encoded/Non-Matching Sequential Printed ( lnkjetted)7
• A – Sequential Matching Encoded/Printed ( Laser Engraved)
• B – Sequential Encoded/Sequential Non-M,atching Printed (Laser Engraved)
• C – Random Encoded/Non-Matching Sequential Printed (Laser Engraved)

Slot Punch5 (Select one option)

• N – No slot punch, This card can be slotted vertically, Printed Vertical Slot Indicators
• B – No Slot Punch, This card can be slotted horizontally, Printed Horizontal Slot lndicators7
• V – Vertical Slot Punch
• H – Horizontal Slot Punch6

Dimension

Y – iCLASS Program1ming
12345 = Card ID Nu1mber
YYYYYYYY-YY = Sales Order Number

Option – Custom Artwork2

• (Specify Artwork Number – Refer to the Custom Artwork Forms for new artwork)
  Enter your final card options from check boxes above. Example: 2000HPGGN

Final Part Number

| –|

(Options #)

---|---|---

iCLASS Card Programming Information

Format Number

|   Field Name(s) e.g . Facility Code| Value|

QTY

---|---|---|---

HID Elite ICE #

| | |
Encoded Start Number| Encoded Stop Number
---|---
Printed Start Number| Printed Stop Number

1. Secure Identity Object (SIO) Programming is not mandatory but highly recommended. If SIO programming is not selected the letter H should be left out from Final Part Number, for example: 2000PGGNN
2. For new artwork files. contact Customer Service for custom artwork number, lead-t imes, and cost.
3. Cards ordered with plain white front and back packaging, or custom artwork, will still have a small HID logo and reference number printed in the lower left-hand corner and a slot punch target printed on the back of the card. The majority of part numbers are marked with sales order number, a custom part number is required to omit all marking from the card. Contact your local support representative for details.
4. The Printed card number is placed in the bottom right-hand corner on the back of the card.
5. Cards are provided with an optional slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards.
6. The ability to add a horizontal slot punch requires a different iCLASS antenna, design. Users can expect a read range reduction of approximately 20% if  they order option H for the Slot Punch.
7. Please note that cards shipped within the Americas are always laser-engraved. lnkjetted option is not available for these cards.
   •The composite construction is recommended for all cards with over-laminate applied. Consult with t he printer manufacturer prior to ordering.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>