Brightown MH-04 350W Space heater Instruction Manual
- June 9, 2024
- Brightown
Table of Contents
Brightown MH-04 350W Space heater
FEATURES
OPERATING INSTRUCTIONS
- Find an open wall plug that is clear of any obstructions such as curtains or hanging wall panels.
- Remove your heater from the box and plug it into the wall outlet.
- Flip the Power switch on the side of the heater to turn it on the heater.
- The heater will emit heat from the Heater Front. Ensure there are no obstructions blocking the heat flow for best results.
- Press the Power button to turn off the heater.
NOTE: Turning off the heater will stop the heating process only. The fan
will continue to work for 1 minute to allow for the internal ceramic heating
element to cool. After 1 minute, the heater will shut down automatically.
CAUTION: Do NOT plug this heater into a surge protector. This heater must
be plugged in upright. Do NOT use this heater plugged in lying down.
CONTROL PANEL
On/ Standby
- Ensure your heater is turned on by flipping the Power switch located on the side of your heater.
- Press the “ ” button to have the heater remain on.
- Press the “ ” button again to have the heater switch to standby mode. In standby mode, the heater will not operate until you press the “ ” button again to activate the heater.
Temperature
Adjust the heater to your desired temperature setting by pressing the “Temp+/-” buttons. The temperature will be displayed on the LED display.
Timer – Auto Shut-off
To use this heater’s auto shut-off timer, ensure your heater is turned on. Press the “Timer” button, and the LED display shows the number of hours you want the heater to run before turning off automatically. Keep pressing the “Timer” button until you reach your desired set time. Once the LED display shows the desired number of hours, wait 3 seconds without pressing any buttons. The heater will set a timer, and shut off automatically after the set time. Pressing the “Timer” button allows you to scroll through 1 and 12 hours, in 1-hour increments. To turn off the auto shut-off timer, press the “Timer” button until the LED display shows “0”.
Timer – Auto Power-on
To use this heater’s auto power-on timer, ensure your heater is turned off.
Press the “Timer” button, and the LED display shows the number of hours you
want the heater to wait before turning it on automatically. Keep pressing the
“Timer” button until you reach your desired set time. Once the LED display
shows the desired number of hours, wait 3 seconds without pressing any
buttons. The heater will set a timer, and shut off automatically after the set
time.
CAUTION: Do NOT use the Auto Power-On function on this heater if you are
not at home. This feature should not be used without an adult present.
CLEANING
- Flip the Power switch to turn off the heater.
- Unplug the unit and let it cool completely
- To keep the heater clean, the outer shell may be cleaned with a soft, damp cloth. You may use a mild detergent if necessary. After cleaning, dry the unit with a soft cloth. CAUTION: DO NOT let liquid enter the heater.
- DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes to clean the heater. This may cause damage or deterioration to the surface of the heater.
- DO NOT immerse the heater in water.
- Wait until the unit is completely dry before use.
OVERHEAT SAFETY FEATURE
This heater is equipped with an internal overheating safety feature. When the
heater’s internal components reach a certain temperature that may cause
overheating and possible fire, the heater will automatically shut off.
WARNING: It is normal for the rear of the heater to feel warm to the
touch; however, a loose fit between the outlet and the plug may cause
overheating of the plug. If this occurs, try inserting the plug into a
different outlet. Contact a qualified electrician to inspect the original
outlet for damage.
STORAGE
Store the heater in a cool, dry location when not in use. To prevent dust and dirt build-up, use the original packaging to repack the unit.
BASIC TROUBLESHOOTING
If the heater will not operate, please check the following before seeking repair advice:
- Check if the plug is plugged into an electrical outlet, if not, plug it in.
- Check if the electricity to the electrical outlet is working.
SERVICE INSTRUCTIONS
- Do NOT attempt ID repair or adjust any electrical or mechanical functions on this unit. Doing so will void the warranty.
- If you have any questions regarding this unit’s operation or believe any repair Is necessary.
- Please write to us at sales@brightownstore.com.
- If you have any other questions or comments, feel free to write to us:
givebest.com
Youtube: @GiveBest
TikTok: tiktok.com/@givebest.com
support@givebest.com
US + 1 (888) 550 1319 Mon-Fri 8:00-22:00(EST)
FAQs
Why is the heater not heating?
Ensure that the heater is plugged into a working wall outlet. If you are using a surge protector, unplug the heater and plug it directly into the wall outlet.
Why is my heater only blowing cold air?
Your heater may be in standby mode. Press the “” button to activate your heater.
Why is my heater making a clicking sound?
Your heater may be in standby mode. Press the “” button to activate your heater.
How do I clean my space heater?
You can clean your space heater with a dry cloth or soft brush. Do NOT use any liquids or abrasive materials to clean your space heater.
What does eco mode do on electric heater?
Each time the set temperature drops from a higher one to a lower one, Eco Mode automatically adjusts the stop time of a heating phase to enhance the effectiveness of your heating system.
Can you leave a portable heater on all day?
Turning off your heater when you leave the room is one of the best methods to prevent it from becoming a fire danger. It is less likely to set things on fire nearby if it is not running because it is not consuming any power.
What type of portable heater is the most energy efficient?
Radiant heat heats people and objects in a room, not the air in between, in a manner similar to how the sun warms us when we’re outside. Electric infrared heaters are among the most energy-efficient kinds since no heat is lost by heating unused area.
What does eco mean on a portable heater?
You can choose the ideal room temperature in ECO Mode. The power will be reduced to conserve energy after the required temperature has been attained. If the temperature is not manually set in ECO mode, it will default to 23°C.
Does Eco mode affect heat?
Eco mode will lower the amount of electricity needed by various outlets in the car. In order to maximise fuel efficiency, it will modify the power output, seating, heating, and cooling systems.
Can I sleep with a portable heater on?
To save their energy costs and stay warm on a chilly winter night, many individuals rely on alternative heating methods like electric heaters. To stay warm and still wake up in the morning, heed this advise carefully as space heaters are typically regarded as dangerous for usage while sleeping.
Can portable heaters overheat?
Industrial is recalling 8,500 electric garage heaters because there is a chance that the heating element could overheat and provide a fire risk. Due to the possibility of a short, Dyson recalled 43,000 portable heaters in Canada and 338,000 in the United States. If the item overheated and caught fire, the recall would have affected 338,000 units.
Do portable heaters use a lot of energy?
Electric space heaters use a lot of electricity even though they are frequently advertised as 100% efficient and are typically tiny in size. The majority of space heaters operate at a cost of approximately 15 per hour and consume 1,500 Watts of electricity on average.
Video
Download PDF Link;Brightown 350W Space heater pdf
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>