Propify SmartHub Mini Smart Gateway User Manual
- June 4, 2024
- Propify
Table of Contents
Propify SmartHub Mini Smart Gateway
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try t0 correct the interference by one or more of the following measures
- Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution
Any changes or modifications to this device not explicitly approved by
manufacturer could void your authority t0 operate this equipment. This device
complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body
Product Description
It is a mini smart gateway. It consist of high integrated Wi-Fi module ,low power-consuming ZigBee/Z wave module, and PCBA. It can be connected to the Smart Life app for device adding, reset, third-party control, and ZigBee/Zwave group cpntrol, meeting smart home requirements.
Product Specifications
| Product name | SmartHub v2 |
|---|---|
| Adapter output | 5V 2A |
| Working temperature | -10 ° C~55 ° C |
| Working humidity | 10%~90% RH(no condensation) |
| Wireless technology | 2.4G/5G Wi-Fi |
Z-wave/Zigbee 3.0
Dimensions| 106 106
23.5mm
Net wight| 160.8g
Packing List
- Smart gateway 1
- Adapter 1
- Antenna2 WIFI/4G
- Installation Guide 1
- Wall Mounting guide card
Installation Guide
Have installation questions?
- Email: smarthubsupport@propify.com
- Phone: 630.647.5444
- Web: setup-smarthome.propify.com
| Step | Instructions | Graphic |
|---|
Step 1
| Open the Propify SmartHub box and inspect all hardware to ensure damage did not occur during transport.|
Step 2
| Install thermostats, door locks and other hardware or smarthome accessories in the box using the included instructions.|
Step 3
| Plug the Propify SmartHub into an outlet that is always powered On and is less than 40 feet from all smarthome devices and accessories.|
Step 4
| After plugging in the Propify SmartHub, the hub will automatically connect to the Propify Servers.
The Hub will display two green lights once a successful connection is established.
|
---|---|---
Step 5
| Optional Securely mount the Propify SmartHub to the wall if it turned on successfully.|
Step 6
|
To complete setup, visit http://setupsmarthome.propify.com/ and follow the step-by-step instructions to pair the Propify SmartHub to all devices at the property.
|
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>