SVEN AP-B500MV Wireless Stereo Headphones with Microphone User Manual
- June 9, 2024
- SVEN
Table of Contents
SVEN AP-B500MV Wireless Stereo Headphones with Microphone
Congratulations on your purchase of the SVEN stereo headphones!
COPYRIGHT
© SVEN PTE. LTD.Version 3.0 (08.08.2022).
This Manual and information contained in it are copyrighted. All rights
reserved.
BUYER RECOMMENDATIONS
- Shipping and transportation equipment is permitted only in the original container.
- Does not require special conditions for realization.
- Dispose of in accordance with regulations for the disposal of household and computer equipment.
APPLICATION
SVEN AP-B500MV wireless stereo headphones with microphone are designed for
operation with PC, notebooks and other mobile devices by means of data
transfer via Bluetooth protocol. They can be also used in internet telephony,
during video conferences, in multimedia applications, in interactive games,
for speech recognition and foreign language teaching.
PACKAGE CONTENT
- Wireless stereo headphones ― 1 pc
- Detachable audio cable ― 1 pc
- USB power cord to USB Type-C ― 1 pc
- User’s Manual ― 1 pc
- Warranty card ― 1 pc
SAFETY PRECAUTIONS
- Don’t use the stereo headphones while driving.
- Don’t use the stereo headphones at high volume for a long time (more than 15 minutes), as this may cause hearing impairment.
SPECIAL FEATURES
- 4.2 Bluetooth wireless signal transmission.
- Wired connection.
- Possibility to control the volume and switch tracks.
- Battery operation time up to 12 hours.
- Radius of operation up to 10 m.
DESCRIPTION
- Volume up button (short press); Next track (long press, ~ 2 seconds).
- ON/OFF button; Call control button; play/pause.
- Volume down button (short press); Previous track (long press, ~ 2 seconds).
- LED indicator.
- USB Type-C jack for battery charging.
- Audio cable jack.
CONNECTION AND OPERATION
Attention! The built-in battery must be charged completely prior to the
headphone’s application.
Headset charging
- Connect the headphones to a USB port of PC or USB charger using USB/USB Type-C cable (included). During battery charging indicator 4 is red.
- When the device is charged in full, indicator 4 goes out.
- There is a short periodic double beep signal when the battery charge level is low and the LED indicator 4 will be red alternately.
- The battery in the headphones is used as an integral part of the device, therefore do not try to extract or replace it, because this can result in warranty cancellation or device damage.
Device switching on/off
- In order to turn on the headphones press and hold the button 2 before you hear a beep signal. When the device is turned on, the LED indicator d will start blinking blue and red (search mode) or blinking blue (connecting mode). In order to turn off the device, press once more and hold the button b before you hear a beep signal. When the device is turned off, the LED indicator d will blink red.
Control buttons
When connected to a telephone:
- in order to receive an incoming call press the button b; press the button 2 once again to finish the call;
- in order to reset the call, press and hold the button 2 (~2 seconds)*;
- when the button 2, is pressed shortly twice, the call function of the last number dialed* is switched on;
- when the button 2 is pressed long, the headset is disconnected from the device and enters to the search mode.
Depending on telephone/smartphone configuration.
Bluetooth technology
- Wireless data transfer via the Bluetooth protocol enables to the connection of wireless headphones to compatible devices. The maximum radius of action of data transfer is 10 m. Such obstacles as walls or other electronic devices can interfere with signal transfer.
Headset to a device interfacing
- It is necessary first to interconnect the device with a signal source (see the connection diagram in Fig. 2) to transfer signals via Bluetooth. To do this, turn on the headset, wait for starting the search mode – the LED indicator 4 will alternate blue light with red one.
- It is necessary to select the search mode of de vices with Bluetooth on a signal source (telephone, notebook, smartphone, etc.). “SVEN AP-B500MV” massage will be displayed on the screen, which is to be connected to*.
- If connection is successful, there will be a short beep signal in the headphones; the search mode indication on the headphones is over. If no devices is connected, headphones will turned off automatically in 2 minutes. If the device interfacing has, been failed, it is necessary to switch the system in the search mode once more (turn off and on)**.
- The indicator d on the headphones blinks blue short during the data exchange (listening music) with a device connected via Bluetooth.
You might have to enter “0000” code to connect some models of devices via Bluetooth. If the item has been already registered in the device list of a source, then the second search mode activation is not obligatory. Choose only the item name “SVEN AP-B500MV” and the “connect” command on the source.
The use in the wired mode
- The device can be used as stereo headphones in the wired mode. In order to connect them to a sound source with the included cable via jack 6.
TECHNICAL SPECIFICATIONS
| Parameter, measurement unit | Value |
|---|---|
| Sensitivity, dB | headphones: 105 ± 3 |
microphone: -58 ± 3
Frequency range, Hz| headphones: 20–20 000
microphone: 30–16 000
Impedance, Ohm| 32
Membrane, mm| ø 40
Connection type| Bluetooth 5.2/mini-jack stereo Ø 3.5 mm (3 pin)
Bluetooth supported profiles| HSP, HFP, A2DP, AVRCP
Radius of operation, m| up to 10
Operation time, h| up to 12
Cable length, m| 1.2
Weight, g| 155
Notes. Technical specifications given in this table are supplemental information and cannot give occasion to claims. Technical specifications and package contents are subject to change without notice due to the improvement of SVEN production.
Model: AP-B500MV
Importer: Tiralana OY, Office 102, Kotolahdentie 15, 48310 Kotka, Finland.
Manufacturer: SVEN PTE. LTD, 176 Joo Chiat Road, № 02-02, Singapore, 427447.
Produced under the control of Oy Sven Scandinavia Ltd. 15, Kotolahdentie,
Kotka, Finland, 48310. Made in China.
® Registered Trademark of Oy SVEN
Scandinavia Ltd. Finland.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>