TRIO 677718000 Nagano Ceiling Light Instruction Manual
- June 9, 2024
- Trio
Table of Contents
TRIO 677718000 Nagano Ceiling Light
WARNING
Before assembling. please read carefully the safety instructions!
POWER OFF
INSTALLATION
REMOTE CONTROL
- ON/OFF
- Brightness Increase
- Brightness 100%
- Light with warm white
- Light with cool white
- Brightness Reduce
- Cyclic transformation Night Light-Brightness 100%-OFF
- Night Light
The light should not be operated on an external dimmer.
Description of how the light works without the remote
control unit
If the light is switched on via the main switch /wall switch, the unit provides the lighting Scenario which was last set using the remote control unit (memory effect). Attention! If the light was last switched off using the remote control unit, it cannot be switched on again via the wall switch due to the memory effect.
Description of how the light works with the remote control unit:
- The enclosed remote control unit can be used universally for all lights of this type. This also means that several lights can be controlled with the same remote control unit.
- The synchronous controlling of several lights is not intended.
Operation of the remote control
Button 1
- ON/OFF: The light is switched on/off completely. After being switched on again it adjusts to 100% brightness. All previous settings are reset.
Button 2
- Night light: The night light is switched on. The main light slowly fades if it was switched on previously.
Button 3/4
- Brightness regulator: The adjustment takes place in stages. By pressing for a short period, it is possible to control the individual stages. Pressing the button permanently results in the maximum or minimum brightness being reached.
- Attention! If a mixed shade has been set via buttons 5 and/or 6, this setting may be lost when adjusting the brightness.
Button 5/6
White: Colour setting- cold white
Warm: Colour setting -warm white
The adjustment takes place in stages. By pressing for a short period, it is
possible to control the individual stages. Pressing the button permanently
results in the warmest or coldest colour setting being reached.
Button 7
Mode: Cyclical modes switch Here, the “100% brightness – off- night light’ functions are interconnected and run in sequence.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>