CORSAIR Vengeance RGB Memory Kit User Guide
- June 8, 2024
- Corsair
Table of Contents
CORSAIR Vengeance RGB Memory Kit
INSTALLATION
Notice: Turn your computer off prior to installing your memory modules
and refer to motherboard/system owner’s manual for correct slots for your
configuration. For optimal performance, please refer to your
motherboard/system owner’s manual to enable XMP in the BIOS.
- Note the orientation of the memory module. Unlatch the retaining clip(s) at the end of memory socket.
- Place the memory module on the socket with the notch aligned correctly.
- As indicated in the picture on the left, place your fingers on the top edge of the memory, gently push down on the memory and insert it vertically into the memory socket until the latches lock.
SOFTWARE
CORSAIR ICUE software connects all your CORSAIR 1GUE compatible products together in a single interface, giving you complete control of everything from RGB lighting and powerful macros to system monitoring and cooling control.
DOWNLOAD CORSAIR ICUE
- For the full CORSAIR iCUE experience, please download our latest CORSAIR iCUE software at www.corsair.com/downloads.
- An internet connection is required for software download.
- CORSAIR iCUE is required for fan speed and RGB lighting control.
HOW-TO VIDEOS
Scan below code to view How-to videos
How to set up VENGEANCE RGB PRO in CORSAIR ICUE
https://youtu.be/OtzofbV7cb0
Setting up DOMINATOR PLATINUM RGB in CORSAIR IcUE
https://youtu.be/doogzUZ7jq0
How to enable full software control for RGB DRAM for
full customization – https://youtu.be/GoUqthopA3s
How to setup ASUS motherboard integration in CORSAIR IcUE
https://youtu.be/C9tz1-fdlKo
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>