QAZQA 104892 Wall Lamp Copper Instruction Manual

QAZQA 104892 Wall Lamp Copper

WHAT’S INCLUDE

SAFETY INSTRUCTION

Please study the instruction manual and the below information carefully before installing or using this product. Please keep this user manual for further reterence:

1. The luminaires may only be installed by authorized and qualified technicians according to the valid regulations for electrical installation.
2. Maintenance of the luminaires is limited to their surfaces. During maintenance no moisture can come into contact with any areas of the terminal connections or voltage control parts.
3. The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution box, betore any installation, maintenance or repair work is undertaken.
4. Exterior lighting must not be installed during rain.
5. Take account of the minimum separation distance from other objects and the room required around the fitting.
6. It in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
7. Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low voltage conductors.
8. When replacing a halogen lamp, wait for it to cool, for a minimum ot 5 minutes.
9. Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical Components
10. Take account of all available technical information.
11. Take note of the symbols when connecting wires:
    • N = Neutral
    • L =Live
    • =Earth

Meaning ot symbols

• For indoor use only, where direct contact with water is impossible
• This icon indicates the level of water-proof and dust-proof
• Protection Class I: the fitting must be earthed
• Protection Class ll: the fitting is doubled insulated and does not require earthing
• Protection Class ll!: the fitting is low voltage
• Minimum distance from lighted objects (meters)
• Only the self-shielded halogen lamp should be used with the luminaire
• Strip the wire to the indicated length (mm); different items require different length
• Connect using the specified cable; different ite ms require different cables
• The type of lamp and maximum size and wattage indicated in each lighting unit must not be exceed; different items require a different kind of light sources with different bulb icons
• The armature is designed to work only with the indicated voltage. Different items require different working voltages.
• The luminaire can be used in combination with a dimmer
• The reference light angle and light space of the luminaire
• This luminaire cannot be disposed together with normal domestic waste in standard rubbish can, but you have to bring it to a staging area for electrical waste

INSTALLATION

DIMENSION

FEATURE

FittinQ B.V.
Smaragdweg 52, 5527 LB Hapert, The Netherlands www.qazqa.nl

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>