CORSAIR M65 RGB Ultra Wireless Mouse Instruction Manual
- June 8, 2024
- Corsair
Table of Contents
CORSAIR M65 RGB Ultra Wireless Mouse
CHARGING THE MOUSE
IMPORTANT: The M65 RGB ULTRA WIRELESS mouse must be fully charged before its first use. Connect the mouse to an available USB 2.0 or 3.0 port on your PC with the USB charging / data cable. The battery / wireless status LED indicator on the mouse will begin pulsing green to denote battery charging and will turn solid when charging is complete.
GETTING TO KNOW YOUR MOUSE
- A — QUICKSTRIKE LEFT CLICK BUTTON
- B — MIDDLE CLICK BUTTON / SCROLL WHEEL
- C — QUICKSTRIKE RIGHT CLICK BUTTON
- D — DPI UP BUTTON
- E — DPI DOWN BUTTON
- F — SNIPER / OPTION BUTTON
- G — FORWARD BUTTON
- H — BACK BUTTON
- I — MULTI-PURPOSE LED INDICATOR
- J — OPTICAL GAMING SENSOR
- K — PTFE GLIDE PADS
- L — OPTIONAL WEIGHTS SLOT
- M — OPTIONAL WEIGHTS PAIR (4.5G + 1.5G)*
- N — USB WIRELESS RECEIVER
- O — POWER / WIRELESS MODE SWITCH
- P — USB CHARGING / DATA PORT
- Q — USB CHARGING / DATA CABLE
SETTING UP 2.4GHz SLIPSTREAM WIRELESS
Hyper-fast sub-1ms wireless connection is designed for no-compromise gaming grade performance.
- Toggle power / wireless mode switch to “2.4GHz” position to turn on your mouse.
- Connect the USB wireless receiver to an available USB 2.0 or 3.x port located on the front panel of your PC or nearby USB port (e.g. on CORSAIR MM700, MM800, MM1000 mousepads).
- The battery / wireless LED indicator will turn solid white when connected.
- Download the iCUE software from www.corsair.com/downloads.
- Run the installer program and follow instructions for installation.
If reconnection is required, initiate USB wireless receiver pairing via the iCUE software settings menu.
SETTING UP BLUETOOTH® WIRELESS
Bluetooth wireless is best for everyday computing tasks, productivity, and office applications.
- Initiate Bluetooth pairing on your Bluetooth 4.0 or higher enabled device.
- Press and hold DPI UP (D) button.
- Toggle power / wireless mode switch to “BT” position to turn on your mouse.
- Follow the instructions to successfully connect your device.
- The battery / wireless LED indicator will turn solid blue when connected
ON-THE-FLY DPI TUNING
The mouse has a unique feature where you can adjust the current onboard DPI stage setting in 50 DPI increments without the software, so you can jump right into the action while you find the perfect sensitivity setting.
FUNCTION
|
SHORTCUT
| MULTI-PURPOSE LED INDICATOR
---|---|---
INCREASE DPI BY 50
|
HOLD DPI UP BUTTON (D) AND PRESS FORWARD BUTTON (G)
|
BLINKS GREEN
DECREASE DPI BY 50
|
HOLD DPI UP BUTTON (D) AND PRESS BACK BUTTON (H)
|
BLINKS RED
RESET DPI STAGE
|
HOLD DPI UP (D) THEN BOTH FORWARD (G) AND BACK (H) BUTTONS FOR 2 SECONDS
|
BLINKS YELLOW
On-the-fly DPI changes are saved to the onboard memory and can be further adjusted in granular 1 DPI steps in iCUE. If iCUE is running, then changes are saved to the software profile directly.
MOUSE STATUS, DPI SETTINGS AND INDICATIONS
Wireless connection and battery status are communicated through the multi- purpose LED status indicator (I) backlighting. The mouse comes preloaded with common competitive DPI settings which can be selected by pressing the DPI Up (D) or DPI Down button (E) with multi-purpose status LED indicator (I) backlighting to reflect the current stage.
BATTERY STATUS
|
MULTI-PURPOSE LED INDICATOR
---|---
BATTERY CHARGING| PULSING GREEN
BATTERY CRITICAL, RECHARGE REQUIRED| PULSING RED
BATTERY LOW, RECHARGE SOON| BLINKING RED
BATTERY MEDIUM| BLINKING AMBER
BATTERY HIGH| BLINKING GREEN
BATTERY CHARGED| GREEN
WIRELESS STATUS
|
2.4GHz WIRELESS MODE – PAIRING| BLINKING WHITE
2.4GHz WIRELESS MODE – PAIRED| WHITE
2.4GHz WIRELESS MODE – PAIRING FAILED| PULSING WHITE
BT WIRELESS MODE – PAIRING| BLINKING BLUE
BT WIRELESS MODE – PAIRED| BLUE
BT WIRELESS MODE – PAIRING FAILED| PULSING BLUE
DPI STAGE STATUS
|
STAGE #1 – 400 DPI| RED
STAGE #2 – 800 DPI| WHITE
STAGE #3 – 1200 DPI| GREEN
STAGE #4 – 1600 DPI| PURPLE
STAGE #5 – 3000 DPI| CAPRI
© 2021 CORSAIR MEMORY, Inc. All rights reserved. CORSAIR and the sails logo are registered trademarks in the United States and / or other countries. All other trademarks are the property of their respective owners. Product may vary slightly from those pictured. 49-002439 AA
- WEB : corsair.com
- PHONE : 888-222-4346
- SUPPORT : support.corsair.com