Dongguan Eranode Electronics M536 Wireless Mouse Instruction Manual
- June 4, 2024
- Dongguan Eranode Electronics
Table of Contents
**an instruction manual
M536 **
M536 Wireless Mouse
Product Name: wireless mouse
Product model: M536
Product size: 10.2cmx6cmx3cm
Main material: ABS
Working voltage: 3V
Working current: 15mA
Working temperature and humidity: – 25 ～ 55 ℃ / < 85% RH
Support system: Windows 98 / 2000 / me / NT; Windows XP Windows VISTA /7/8/10
Characteristic:
- The left and right buttons are designed with micro switches, and the sound is clear and crisp
- Suspension key, outstanding personality
- Intelligent sleep automatically enters the power-saving mode when not in use, and click again to activate the usage method:
1. 2.4G connection mode: open the battery cover at the bottom of the mouse, install two AAA batteries (No. 7 battery) into the battery slot, take out the receiver, cover the mouse battery cover, and plug the receiver into the computer. matters needing attention:
- Do not expose the battery to a humid and high-temperature environment, and avoid contact with conductive materials or liquids
- Do not reverse install the battery to cause a short circuit
- Do not disassemble or try to repair this product by yourself
- If the product operates abnormally, please check whether the battery is installed correctly and whether the battery is charged
Storage method:
Store without power and do not expose to damp and high-temperature environment
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>