Kmart 43151165 Rattan Ball Pendant Instruction Manual
- June 8, 2024
- Kmart
Table of Contents
Rattan Ball Pendant
Keycode ： 43151165
INSTRUCTIONS FOR INSTALLATION ：
Caution ：Before adding or replacing your pendant, make sure the
electricity is switched off and any plugs are removed from the wall socket.
Always allow bulb to cool completely before installation.
Caution ：Always ensure pendant is completely installed and secure before
connecting to an electricity supply.
- Remove Rattan Ball Pendant from packaging.
- If you are using an E27 Edison Screw Bulb, remove Part(A) from the shade as per diagram. If you are using an E14 Edison Screw Bulb, please place the adaptor in the open gap.
- Install Rattan Ball Pendant to light fitting.
- Install the Lamp Holder to the open gap on pendant.(figure 1)
- Assemble the bottom part to upper part(figure 2)
- Install Globe (not included) into the Lamp Holder.(figure 3)
- Check to ensure that all the components have been assembled correctly.
- Connect to electricity to see Rattan Ball Pendant light up.
Care information
- Carefully read all instructions for the assembly and use of this product before connecting to an electricity supply.
- Light bulbs become very hot in seconds. Do not attempt to touch the light while the lamp is lit and supervise others accordingly.
- Before cleaning or replacing shade, switch off the light and unplug from the mains socket. Allow the bulb to cool for at least 10minutes before touching it and making the change.
- Ensure the new bulb is secure in the lamp holder before reconnecting to the power supply. If in doubt, consult a qualified electrician.
FOR INDOOR USE ONLY
Documents / Resources
|
Kmart 43151165 Rattan Ball
Pendant
[pdf] Instruction Manual
43151165, Rattan Ball Pendant, 43151165 Rattan Ball Pendant, Ball Pendant,
Pendant
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>