SONY XS-692ES Mobile ES 2-way Component Speakers Instruction Manual
- June 8, 2024
- Sony
Table of Contents
SONY XS-692ES Mobile ES 2-way Component Speakers
Dimensions
Tweeter
Unit: mm (in)
A Reference Point
B Reference Plane
C Reference Axis
Depending on the attachment location, the dimension value may differ.
Woofer
A Reference Point
B Reference Plane
C Reference Axis
Passive crossover network
Notice for customers: the following information is only applicable to
equipment sold in countries applying EU directives
This product has been manufactured by or on behalf of Sony Corporation.
EU Importer: Sony Europe B.V.
Inquiries to the EU Importer or related to product compliance in Europe should be sent to the manufacturer’s authorized representative, Sony Belgium, bijkantoor van Sony Europe B.V., Da Vincilaan 7-D1, 1930 Zaventem, Belgium.
Disposal of old electrical & electronic equipment (applicable in the
European Union and other countries with separate collection systems)
This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring that this product is disposed of correctly, you will help to prevent potential negative consequences for the environment and human health, which could be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.
Notice for customers: the following information is only applicable to
equipment sold in UK applying relevant statutory requirements
This product has been manufactured by or on behalf of Sony Corporation.
UK Importer: Sony Europe B.V.
Inquiries to the UK Importer or related to product compliance in the UK should be sent to the manufacturer’s authorized representative, Sony Europe B.V., The Heights, Brooklands, Weybridge, Surrey KT13 0XW, United Kingdom.
Disposal of old electrical & electronic equipment (applicable in the
European Union and other countries with separate collection systems)
This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring that this product is disposed of correctly, you will help to prevent potential negative consequences for the environment and human health, which could be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.
Precautions
- Do not continuously use the speaker system beyond the peak power handling capacity.
- Keep recorded tapes, watches, and personal credit cards using magnetic coding away from the speaker system to protect them from damage caused by the magnets in the speakers.
- Please note the following when installing the units; otherwise malfunction and/or deterioration in sound quality may result.
- Do not touch the diaphragms and/or speaker cones by hand or with tools.
- Do not put your fingers through the holes of the frame.
- Do not drop foreign objects in the units.
- Do not place this product close to medical devices.
- This product (including accessories) has magnet(s) which may interfere with pacemakers, programmable shunt valves for hydrocephalus treatment, or other medical devices. Do not place this product close to persons who use such medical devices. Consult your doctor before using this product if you use any such medical device.
Caution
When using the speakers with an amplifier or power booster employing the BTL
(balanced transformer less) system, be sure to connect the speaker system
cords directly to the amplifier speaker cords. If the connection is made
through already existing speaker cords which have a common lead for both the
right and left channels, it is possible that no sound will be heard, and that
the amplifier will be damaged.
If you cannot find an appropriate mounting location, consult your car dealer or your nearest Sony dealer before mounting.
Specifications
- Speaker Separate type, 2 way:
Woofer 16 × 24 cm
(6 × 9 in) cone type
Tweeter 2.5 cm (1 in) dome type
- Short-term maximum power1 330 W2
- Rated power 90 W*2
- CTA 2031 RMS Power 110 W
- Rated impedance 4 Ω
- Output sound pressure level 90±2 dB (1 W, 1 m)*2
- Effective frequency range 35 – 40,000 Hz*2
- Crossover frequency 5,000 Hz
- Mass Woofer:
Approx. 1,400 g (3 lb 1 oz) per speaker
Tweeter:
- Approx. 60 g (2 oz) per speaker
- Passive crossover network: Approx. 160 g (6 oz) per box
- Supplied accessories Parts for installation
- Design and specifications are subject to change without notice.
Design and specifications are subject to change without notice.
- “Short-term maximum power” may also be referred to as “Peak Power”.
- Testing Condition: IEC 60268-5 (2003-05)
Mounting
A depth of at least 71 mm (2 7/8 in) is required to mount the woofer. Measure the depth of the area where you are to mount the speaker, and ensure that the speaker is not obstructing any other components of the car. Keep the followings in mind when choosing a mounting location:
-
Make sure that nothing is obstructing around the mounting location of the door (front or rear) where you are to mount the speaker.
-
A hole for mounting may already be cut out of the inner panel of the door (front or rear). In this case, you need to modify the board only.
-
If you are to mount this speaker system in the door (front or rear), make sure that the speaker terminals, frame or magnet do not interfere with any inner parts, such as the window mechanism in the door (when you open or close the window), etc.
Also make sure that the speaker grille does not touch any inner fittings, such as the window cranks, door handles, arm rests, door pockets, lamps or seats etc. -
If you are to mount this speaker system in the rear tray, make sure that the speaker terminals, frame or magnet do not touch any inner parts of the car, such as the torsion bar springs (when you open or close the trunk lid), etc.
Also make sure that the speaker grille does not touch any inner fittings, such as seat belts, head rests, center brake lights, inner covers of the rear wipers, curtains or air purifiers, etc. -
The suitable mounting location for the tweeters varies depending on the type of car. Choose a location that suits your car.
Parts list
Tweeter
Example
- Remove the inside door panel.
- Unit: mm (in)
Decide the method to mount the unit depending on the type of the car and the installation location.
Woofer
- Mark the 4 bolt holes and make them 3.2 mm (1/8 in) in diameter.
Unit: mm (in)
Standard connection
Speaker cord (not supplied)
Power amplifier, etc.
Note When releasing the cables, push down on the catch firmly and release
them carefully.
If excessive force is used, damage to the speaker or cable terminals may
result.
Passive crossover network
Adjusting the sound pressure of the tweeter
You can switch the sound pressure to 0 dB or +3 dB.
Connections
Basic connection
Standard connection
Standard connection
- Rear right speaker
- Front right speaker
- Rear left speaker
- Front left speaker
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>