CONCEPTRONIC DANTE03T 2.5 Inch Hard Drive Box USB 3.0 Installation Guide
- June 8, 2024
- CONCEPTRONIC
Table of Contents
**CONCEPTRONIC DANTE03T 2.5 Inch Hard Drive Box USB 3.0 Installation Guide
**
Assembly Guide
Step 1:
To open the lower cover, push as indicated in the direction shown in the image.
Step 2:
Connect the hard disk to the SATA connector.
Step 3:
Close the bottom cover by pushing in the direction shown in the image.
Installation and Usage
Connect the 2.5” hard disk box to your computer
- Connect the USB cable to the 2.5” hard disk box and to a free USB port on your computer.
The computer will automatically recognize and install the 2.5” hard disk box. No driver installation is required.
Disconnect the 2.5” hard disk box from your computer
The 2.5″ hard disk box must be removed safely before you disconnect it from
your computer, in order to prevent data loss.
- Double click on the “ Safely Remove Hardware ” icon in your system tray.
The “ Safely Remove Hardware ” window will be shown.
- Click on the connected 2.5” hard disk box (often listed as “USB Mass Storage Device”) and click the “Stop” button.
- Confirm the disconnection by clicking “OK”.
The 2.5″ hard disk box is now safely removed from your computer. You can now disconnect the 2.5″ hard disk box.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>