LED LOVERS 5 Pack Slim Cabinet LED Puck Lights User Manual
- June 8, 2024
- LED LOVERS
Table of Contents
LED LOVERS 5 Pack Slim Cabinet LED Puck Lights
Feature
- 5 BRIGHT LEDS PER PUCK
- REMOTE CONTROL
- MANUAL POWER ON
- DIMMABLE LIGHT
- TIMER FUNCTION (30 MIN)
- EASY INSTALLATION
- BATTERY POWERED
Intended use
Decorative lighting for cabinets and indoor (moisture-free) rooms. The product is not intended for any other use. Follow the instructions in this user manual to ensure safe installation and use of the product. The product is intended for private indoor use only.
Technical specifications
- Model: LL-IN-PL5AAARC-WH
- Input power: 4.5Vdc (3x AAA battery)
- Power consumption: 0.1W per LED, 0.5W per puck
- Input power Remote Control 3Vdc (2x AAA battery)
- Diameter puck: 8.9 cm
- Net weight : 45 grams (per LED Puck light, excluding batteries)
Kit components/package content
QTY | Component |
---|---|
5 | LED Puck Light |
5 | Adhesive tape |
1 | Remote control & holder |
1 | User manual |
Open the packaging carefully before taking out the products. Make sure the kit is complete and undamaged. Check that the plastic parts are not broken or damaged. If you find any components are missing or damaged, contact the vendor and do not use the product. Retain the packaging or recycle it in accordance with local regulations.
Attention! To keep children safe, do not leave packaging (plastic bags, cardboard boxes, expanded polystyrene elements etc.) lying around. Danger of suffocation!
Installing and using the product
Installing the batteries in the LED Puck light
- Use 3 batteries, type 1.5Vdc AAA
- Open the back of the LED Puck light with a coin. Turn the cover counterclockwise to open it.
- Insert 3 x 1.5Vdc AAA batteries, observing the polarities in the battery compartment.
- Insert the three pins on the cover into the three holes on the back of the LED Puck light. To secure the cover, turn it clockwise.
- Note: If the batteries need to be replaced after mounting the LED Puck light, turn the LED Puck light counterclockwise to open it.
Installing the batteries in the Remote control
- Use 2 batteries, type 1.5Vdc AAA
- Remove the remote control from its holder.
- Slide the battery cover down to open the battery compartment.
- Insert the batteries, observing the polarities in the battery compartment.
- Replace the cover, closing the battery compartment.
Switching the LED Puck light On/Off
- Once batteries have been inserted into the LED Puck light and remote control, the
- LED Puck light can be turned on using the remote control’s button. The LED Puck light can also be turned on by pressing its center.
- Turn the LED Puck light off using the remote control’s button. The LED Puck light can also be turned off by pressing its center.
- Dimming the LED Puck light & Timer function
- To dim the LED Puck light, press the remote control’s button once.
- To turn the LED Puck light on for a limited time, press the remote control’s button
Installation – Placement of the LED Puck lights
Each LED Puck light can be mounted (using the provided adhesive tape) using
its rear surface. This allows the LED Puck light to be affixed to any dry and
smooth surface, which is free of dirt and grease. In order to prepare surfaces
for the LED Puck light, wipe the surface with a cloth soaked in degreaser,
then wipe it dry before placing the strips.
Cleaning and maintenance
Proper and regular cleaning will ensure safe operation and extend the lifespan
of the product. Use a dry cloth to remove dust from the puck lights.
Attention!
• Do not clean the product with any strong chemicals, alkali, abrasive or
disinfecting agents, as they may cause damage to the surface of the product.
• Do not immerse the product or its base in water or any other liquids.
Repair and service
The product does not contain parts that can be serviced by the user. Do not
attempt to repair the product on your own. Always have the product repaired by
a qualified repair center.
Storage & transportation
When storing the LED Puck light kit, the product should be cleaned in
accordance with this user manual. The product should be stored in its original
packaging. Always store the product in a dry and well-ventilated room and
beyond the reach of children. Protect the product against vibrations and
shocks during transport.
Recycling
Packaging materials are recyclable and marked with a recycling symbol.
Packaging should be recycled in accordance with local regulations.
Packaging materials should be kept away from children because they could be
hazardous.
Safety instructions
- Warning! Do not stare at the illuminated LED’s of Puck lights for an extended period of time. The LED’s can cause injury or irritation to the eyes. Do not look directly at the light source using optical instruments that focus on light rays.
- The LED’s cannot be replaced.
- Read the user manually carefully before using the product
- Do not place the LED Puck lights close to products that become hot, such as home and kitchen appliances like ovens, cookers, gas burners, etc.
- Do not immerse the product in water or any other liquids.
- Do not cover the product when it is switched On or hot.
- To avoid risk of electrocution and/or fire, do not expose the product to rain or dampness
- The product is intended for indoor use only
- If you hand over the product over to a third party, also hand over the user manual
- Retain the product’s user manual and packaging
EC Declaration Of Conformity
- We, Mascot Online BV Bellstraat 7 3861 NP Nijkerk
- The Netherlands
- Declare under our sole responsibility that the product:
- Product Brand: LED Lovers
- Product Model No: LL-IN-PL5AAARC-WH
- Product Description: 5 pack – Slim Cabinet LED Puck Lights – Remote Control
- Product Rating: Input 4.5Vdc (3x AAA battery), 0.5 watt (per puck)
Following the provisions of the Directives:
- Electromagnetic Compatibility Directive (EMC): 2014/30/EU
- RoHS Directive: 2011/65/EU And standards to which Conformity is declared:
EMC:
- EN 55015:2013+A1:2015
- EN 61547:2009
- EN61000-3-2:2014
- EN61000-3-3:2013
- Place: Nijkerk
- Date of issue: 01-01-2017
- Authorized Signature name: B van Dijk
- Title: M anaging Director
- Version 2017.5.12
- This declaration is an EC Type Declaration Of Conformity as referred in EN45014
Documents / Resources
| LED
LOVERS 5 Pack Slim Cabinet LED Puck
Lights
[pdf] User Manual
LL-IN-PL5AAARC-WH, 5 Pack Slim Cabinet LED Puck Lights, 5 Pack LED Puck
Lights, Slim Cabinet LED Puck Lights, Slim Cabinet LED Lights, LED Lights,
Puck Lights, Slim Cabinet, Cabinet Lights, Lights
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>