Newland NL-81 Router User Manual
- June 8, 2024
- Newland
Table of Contents
NL-81 Router
User Manual Router User Manual
Model: NL-81
Packing List
Installation Instructions
Connect the router to the power and connect the WAN port to the broadband
network. 
*The first network port on the right side of the power hole is the WAN port, and the second, third network port is LAN port.
If the router LED indicator is red and the network is not connected, please
refer to “Configuring the Router”.
When the router LED indicator turns white, the router has been successfully
installed.
Configuring the Router
3.1 Configure using APP (recommended)
- Download and install”Router WiFi” APP and register to login to the home page;
-
This APP can manage routers such as remote control, smart connection, open Wi-Fi timer, open guest Wi-Fi, etc.
-
Open the mobile phone WLAN settings page, select and connect the CLARO_WIFIXX
Wi-Fi network (Wi-Fi name and password to view the bottom label of the router);
*If the mobile phone system is IOS, please connect WiFi according to the IOS interface prompts.
-
Click the “ + ” and click the “Connecting Device”
-
Click “start Configuration” will automatically detect the Internet access method;
4.1. When the automatic detection is successful, the Wi-Fi settingsare automatically entered.
4.2. When the automatic detection fails, you can reconnect.
(This step may be skipped due to different internet access methods.)
-
Set the router’s new Wi-Fi and administrator password. It is recommended to set the Wi-Fi password as the administrator password.
-
The configuration is successful.
-
-
The router LED indicator white long brightindicates that the network connection is successful, and can access the Internet
-
If the network match is abnormal, you can press RET botton for more than 3 seconds to resume the factory settings and start again.
*3.2 Other (optional reading):
How to add multiple sub-routers to extend Wi-Fi network?
Method 1: Use network cable to add sub-router
Connect the power supply, insert the two ends of a network cable between the router’s network ports (the WAN port of the sub-router connect the LAN port of the main router), automatically obtain the configuration and connect successfully.
Method 2: Use APP
to add sub-router**- The sub-router is close to the main router and connected to the power supply.
- Open the “+” enter the Search Router page
- Press the WPS button of the sub-router about 3 seconds. After the LED indicator flashes, release it and start the network configuration.
If the LED indicator turns white and bright, the network is successful (usually about 1 minutes). After successful networking, the APP interface displays the connected sub-routers.
Product Specification
| Parameter Name | Parameter Description |
|---|---|
| Equipment Power Consumption | <9W ( Not include power adapter ) |
| Power Input | 12VDC , 1A |
Environment
Temperature| Working temperature: -10°C-50°C
Storage temperature: -20°C-70°C
Ambient Humidity| 10%-95% ( Non-condensing )
Dimension| 90mm ( L) x9Omm ( W ) x84mm ( H )
Weight| About 135g
Environmental protection
labeling:
The environmental protection service life shall be labeled in accordance with
SJ/Z 11388-2009 General Rules for the Environmental Protection Service Life of
Electronic Information Products. The signs identified on the product ontology
indicate that the use period of environmental protection is 20 years. The
environmental protection service life of electronic and electrical products
refers to the period when the toxic and harmful substances or elements
contained in the electronic and electrical products will not leak to the
outside, and the users of the electronic and electrical products will not
cause pollution to the environment or damage to the human body and property
when using the electronic and electrical products. Please use this product
according to the instruction manual during the period of environmental
protection.
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
Caution! Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment and it also complies with Part 15 of the FCC RF
Rules. This equipment must be installed and operated in accordance with
provided instructions and the antenna(s) used for this transmitter must be
installed to provide a separation distance of at least 20 cm from all persons
and must not be co-located or operating in conjunction with any other antenna
or transmitter. End-users and installers must be provided with antenna
installation instructions and consider removing the no-collocation statement.
Warranty Description
When you purchase a product offered by Newland from an authorized dealer, you
have a 12-month warranty as standard, except for man-made causes. The warranty
period begins on the date of invoice.
For your lawful rights and interests, please notice:
- Please keep this card properly. No reissuance will be provided if you lose it and it becomes invalid if altered.
- In the event of non-man-made failure of the product, you can guarantee the product by the warranty card and the purchase invoice marked with the product number.
Warranty does not cover the following circumstances:
- Damage or malfunction caused by man-made reasons such as opening or remodel the machine on users’ own.
- Damage or malfunction caused by unsatisfactory environment.
- Damage or malfunction caused by force majeure incidents (such as fire, earthquake, lightning strike, war).
- Damage or malfunction caused by failure to operate and maintain in accordance with the user’s manual.
- Damage of external parts such as equipment enclosure, power connector in operation.
- The inconsistence of the Warranty Card and the product serial number, or the warranty card has been altered.
- Damage or malfunction caused by transporting, loading and unloading.
We provide paid repair and maintenance service for the products that are
beyond the warranty scope.
The final explanation rights of this warranty description are reserved by
Newland.
Product Warranty
We appreciate your purchase of Newland product. Please read and fill in the warranty and keep it propely for the future use.
Subscriber Information
Customer Name……………….
Address/ Zip Code…………………..
Phone…………………………………………
Email……………………………………
Product Model…………………………….
Serial Number…………………………….
Date of Purchase…………………..
Invoice Number………………………….
Dealer Name………………………..
Dealer Address……………………………..
Deale Phone………………………………..
Please keep this card properly. No reissuance if lost
Dealer: (Seal)……………….
Statement
All are trademarks of Fujian Newland Communication Science Technology Co.,
Ltd. and may not be counterfeited. All other trademarks mentioned in this
manual have their respective owners. The copyright of this manual belongs to
Fujian Newland Communication Science Technology Co., Ltd. and is protected by
the laws of the People’s Republic of China.This manual is intended as a guide
only. All statements and recommendations in this manual do not constitute any
express or implied guarantee.
Fujian Newland Communication Science Technology Co., Ltd. . reserves the right
to make improvements and changes to the equipment and manuals without prior
notice.
Copyright Fujian Newland Communication Science Technology Co., Ltd.
All rights reserved.
Fujian Newland Communication Science Technology Co., Ltd.
Address : F5, Hongzhuo Bldg., Newland S&T Park, 1 Rujiangxi Road, Mawei,
Fuzhou, Fujian,
350015, China
Tel : 0086-0591-87860168
Zip code : 350015
Web :http://www.newland.cn