Flame-tec 253ABDGMP Smart Probe User Guide
- June 8, 2024
- Flame-tec
Table of Contents
Flame-tec 253ABDGMP Smart Probe
SMART POBE FEATURES
- Food grade stainless steel pipe structure, waterproof grade IP67 (Diswasher Safe).
- Bluetooth with transmission distance of 30 ft.
- Food temperature measurement 0 F° – 212 FO.
- Grill/Oven temperature measurement 0 F° – 530 F
- No wires to contend with, perfect for Rotisserie Cooking.
- Up to 4 probes can be connected to the App.
- Fast charging via USB docking station.
- Magnet on docking station for convenience.
- Fully charged in 2 minutes.
- Capacitor enabled. No battery needed.
- 24 hour standby. 4 hours operation time on full charge.
Before we get started, make sure you have ready
Operating The Smart Probe
- Download the i-Elame Pro App
- Charge your Smart Probe using a (5V) USB charger (Not included).
- Indicator light will change to green when fully charged. Remove probe from charging dock.
- Open the i-Flame Pro App and it will auto pair with your Smart Probe.
- You can monitor your food temp and your oven temp with the App. Up to 4 probes can be connected to the App.
HELP
- Sales Support: 844-352-6383
- Tech Support: 888-297-0238
- Fax: 888-559-3612
- E-mail: support@flame-tec.comn
- Website: flame-tec.com
- Address: 136 Hillview Blvd
- Hendersonville, NC 28792
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and,
if not installed and use in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>