MUVIEW Bell-J7 Wireless WiFi Video Doorbell Camera User Guide

June 9, 2024
MUVIEW

MUVIEW-Bell-J7-Wireless-WiFi-Video-Doorbell-Camera-
logo

MUVIEW Bell-J7 Wireless WiFi Video Doorbell Camera

MUVIEW-Bell-J7-Wireless-WiFi-Video-Doorbell-Camera-product-
image

Warranty Service

Thanks for your shopping and trust.
We have been optimizing our products and improve our lifetime customer service to offer you a better shopping experience. If you have any problems, please feel free to send us an E-mail. We will solve your problems within 24 hours. In addition, your advice or suggestions will be much appreciated and welcomed.
Register via link below to get 3 Years Warranty Extension.
https://bit.ly/3zBSB2y

Product Service
Email: Support@mubview.com
Distributor: business@mubview.com

More About Us
Web: www.mubview.com
Facebook: www.facebook.com/mubview
Amazon Store : www.amazon.com/mubview

Brand Story
Since its inception in 2019, MUBVIEW has been committed to being a promoter of a smart lifestyle. MUBVIEW not only focuses on technology and superior service, but also pays special attention to customer privacy. The recorded video will be encrypted by the military level so that you can enjoy the ultimate confidence experience. In the past three years, the love and trust of millions of customers have been the driving force behind MUBVIEW ensuring a smart and relaxed lifestyle for everyone.

What’s in the Box

MUVIEW-Bell-J7-Wireless-WiFi-Video-Doorbell-Camera-01

  • Doorbell * 1
  • Ding Dong *1
  • Quick User Guide *1
  • USB Cable *1
  • Screws Set/Screwdriver *1
  • 3M Tape *2

NOTE: Micro SD card and power adapter are not included.

Meet the Doorbell

Doorbell comes with a 4,500mAh rechargeable Li-ion battery.

Meet the Chime

Please mind the battery polarities while installing the batteries.

Download and Install App

Download ZUMIMALL App from Google Play™ or
App Store™. Or scan the QR codes as below, with your smart phone.
NOTE: Google Play™ is a trademark of Google Inc.
App Store™ is a service mark of Apple Inc.

MUVIEW-Bell-J7-Wireless-WiFi-Video-Doorbell-Camera-04

NOTE: Please turn on both of the following permissions.

  1. Allow ZUMIMALL App to access mobile cellular data and wireless LAN, otherwise it will fail to connect the camera.
  2. Allow ZUMIMALL App to receive pushed messages, otherwise, the phone will not receive alarms when motion is detected.

MUVIEW-Bell-J7-Wireless-WiFi-Video-Doorbell-Camera-05

Account Registration

New user needs to sign up ZUMIMALL App with email address. Click ‘Sign up’ to create a New Account and follow the steps to complete registration.

MUVIEW-Bell-J7-Wireless-WiFi-Video-Doorbell-Camera-06

Add Camera to App

Preparations for connection
  1. Insert a Micro SD Card into the camera to save video clips or you can start the 7-day free cloud service. Without Micro SD Card or cloud service, no video will be saved.
  2. The camera only works with 2.4GHz Wi-Fi, not support 5GHz.
  3. When connecting to the network, please take the camera close to the router (Recommended within 10-15ft).
Connect Camera to App

MUVIEW-Bell-J7-Wireless-WiFi-Video-Doorbell-Camera-06

MUVIEW-Bell-J7-Wireless-WiFi-Video-Doorbell-Camera-08

MUVIEW-Bell-J7-Wireless-WiFi-Video-Doorbell-Camera-09

MUVIEW-Bell-J7-Wireless-WiFi-Video-Doorbell-Camera-10

Charge your doorbell

Prior to the doorbell installation, please charge up your doorbell for about 8-10 hours till the charging LED turns BLUE from RED.

MUVIEW-Bell-J7-Wireless-WiFi-Video-Doorbell-Camera-11

Compatible charger (not provided):

USB compatible mobile phone charger (DC 5V   1A~2A).

Set up Doorbell

  1. Switch on power for your doorbell, and you will see the LED indicator flashes red (once per second). Start setting up your doorbell following the in-app instructions.MUVIEW-Bell-J7-Wireless-WiFi-Video-Doorbell-Camera-13
  2. Tips
    • Please operate the setup near your Wi-Fi router.
    • Make sure your phone is connecting to a 2.4GHz Wi-Fi.
    • Make sure the doorbell is turned on, and its indicator LED is flashing red. If not, press and hold RESET for 5 seconds.
    • Ensure the Wi-Fi signal is good, and the Wi-Fi password is correct.
LED STATUS INDICATION
Solid red Device is abnormal.
Flash red (once/sec) Ready for Wi-Fi configuration.
Flash red (twice/sec) Connecting to Wi-Fi
Solid blue Device is online
 Flash blue (once/sec) LiVe-viewing doorbell cam
Flash blue (twice/sec) Firmware upgrading

Pair With Your Indoor Chime

  1. Click the SETTING button on the chime, and the chime will be in pairing mode for 20 seconds, with its red LED flashing.

  2. Press the doorbell button to send a pairing signal, and your chime will sound to react, together with its blue LED flashing. Chime pairing succeeds.MUVIEW-Bell-J7-Wireless-WiFi-Video-Doorbell-Camera-15

  3. Chime settings.

    • Ringtone selection.
      Click to change ringtone (4 ringtones available).

    • Volume control button.
      Click to control volume:
      level 1: 110 dB; level 2: 100 dB
      level 3: 90 dB; level 4: 80 dB

    • Settings.
      Click to enter/quit pairing mode;
      Press & hold for 5 seconds to restore factory defaults.

Install Your doorbell

  1. Select location for your doorbell.MUVIEW-Bell-J7-Wireless-WiFi-Video-Doorbell-Camera-17

  2. (OPTIONAL) Install at an angle.
    You can purchase the following angled brackets so as to point your doorbell to a specific view angle.

  3. Standard installation.

Tamper Alarm

Anti-theft Tamper Alarm.
You can also enable the anti-theft alarm in doorbell settings.

MUVIEW-Bell-J7-Wireless-WiFi-Video-Doorbell-Camera-20

Tamper Alarm On
With tamper alarm on, your doorbell detects disassembly by the trigger on its back, and then a 30-second siren alarm will be triggered. Meantime, video recording get started, and alarm notification will be pushed to the owner’s APP account.

Tamper Alarm Off
You can disable the tamper alarm in doorbell settings, and detach the doorbell without any alarm for battery recharge or regular maintenance.

Product Specifications

Video Doorbell Model No.:Bell J7

  • Camera 2.0MP Full-HD Camera
  • Effective pixels 2304H x 1296V
  • IR LED High power dot-array IR LED x 1
  • View angle 145°
  • Motion detect range 100° (Max 5m)
  • Motion sensitivity 5 level sensitivity settable
  • Alarm trigger Call button, motion detect, anti-theft alarm
  • Wi-Fi 2.4 ~ 2.4835 GHz WIFI (IEEE802.11b/g/n)
  • Video recording Video clips against events
  • Audio Full duplex 2-way audio
  • Storage SD card (Max. 128G)
  • Cloud storage Yes (7-days-free trial)
  • Power supply Built-in rechargeable Li-ion battery
  • Battery capacity 4,500mAh
  • Ingress protection IP65
  • Operating Temp. -10℃ to 50℃
  • Dimensions 34.5 x 56 x 134.6mm
  • Net weight 125.8g (Battery Included)

Wireless Chime Model No.: Chime06

  • Power source 1 DC 5V 1A (from Micro USB)

  • Power source 2 AA LR6 1.5V battery x 3 units

  • Consumption 0.4W

  • Ringtones 4 ringtones optional

  • Connection type Radio frequency 433MHz

  • Place of use Indoor

  • Blue LED flashing Pairing mode

  • Red LED flashing Working normally
    Blue LED flashing twice Reset factory default succeeds

  • Working Temp. -10℃ ~ 50℃

  • Humidity <90%, no condensation

  • Dimension 75.5 x 75 x 28mm

  • Weight 70g (Exclude batteries)

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals