BOSE FreeSpace 3 Loudspeaker System Installation Guide
- June 9, 2024
- Bose
Table of Contents
BOSE FreeSpace 3 Loudspeaker System
Installation Guide
For use by trained installers only
| This product conforms to the EMC Directive 89
www.Bose.com/static/compliance/index.html.
---|---
| This product conforms to all applicable Electromagnetic Compatibility
Regulations 2016 and all other applicable UK regulations
The complete declaration of conformity can be found at:
www.Bose.com/compliance
Package contents
Dimensions
Amplifier output connection
Transformer tap setting
- Lower Wattage: The transformer tap is set at the factory for 200W use. To set it for lower wattage, remove the end of the + jumper wire that is connected to 200W and reattach it to the appropriate tap (100W, 50W, or 25W).
Note: Jumpers required for 70V/100V operation. For transformer bypass, remove jumpers from transformer settings and use 4-8Ω input.
Direct (transformer bypass) use
- Mono Direct: To bypass the transformer and prepare the loudspeaker for 4W use and mono sound input, remove the two jumpers from the transformer settings on the front of the loudspeakers. Leave the CH1 and CH2 input jumpers on the back of the loudspeaker as they are.
Stereo Direct
- Stereo Direct: To bypass the transformer and prepare the loudspeaker for 4W use and stereo sound input, remove all jumper wires.
Satellite speaker connection
2 speaker
4 speaker
4 speaker in series
Using other compatible Bose
• You can use the Frees pace® 3 system Acoustimass® module with other Bose®
speakers. Just be sure to connect both the speakers and the module directly to
the amplifier, using separate channels or connect speakers that do not need
equalization in parallel with the Acoustimass module on the same channel.
Caution: Do not connect any speakers, other than FreeSpace 3 satellite
speakers, directly to the module.
Mounting and wiring the module
- Choose a mounting position, method, and hardware consistent with local building codes and regulations. Use at least three mounting screws.
Mounting and wiring satellite
- Choose a position and mounting method consistent with local building codes and regulations. Use four screws per bracket.
Use four screws per bracket.
China Importer: Bose Electronics (Shanghai) Company Limited, Level 6,
Tower D, No. 2337 Gudai Rd. Minhang District, Shanghai 201100
UK Importer: Bose Limited Bose House, Quayside Chatham Maritime, Chatham,
Kent, ME4 4QZ, United Kingdom
EU Importer: Bose Products B.V., Gorslaan 60, 1441 RG Purmerend, The
Netherlands
Mexico Importer: Bose de México, S. de R.L. de C.V. , Paseo de las Palmas
405-204, Lomas de Chapultepec, 11000 México, D.F. For importer & service
information: +5255 (5202) 3545
Taiwan Importer: Bose Taiwan Branch, 9F-A1, No. 10, Section 3, Minsheng
East Road, Taipei City 104, Taiwan. Phone Number: +886-2-2514 7676
