MILLION DOLLAR BABY Classic M23302 Nantucket Changing Table Instruction Manual
- June 9, 2024
- MILLION DOLLAR BABY Classic
Table of Contents
Classic M23302 Nantucket Changing Table
Instruction Manual
M23302 Nantucket Changing Table
WARNING
READ ALL INSTRUCTIONS BEFORE USE OF THE CHANGING TABLE.
WELCOME HOME
We havehave carefully designed and crafted each piece of furniture to be
with your family for years to come.
Here’s to new memories of bedtime stories, goodnight kisses, holiday mornings,
and baby’s first steps. We hope you share your family’s story with us on
Instagram @milliondollarbabyclassic so we can celebrate with you.
From our family to yours, MILLION DOLLAR BABY CLASSIC
GETTING STARTED
As always, for additional
questions, please contact us and we’ll be more than willing to help!
Milliondollarbaby.com/support
( 3 2 3 ) 9 0 9 – 5 0 1 9
PARTS
NOT TO SCALE 
HARDWARE
ACTTUAL SIZE
ASSEMBLYINS TRUCTIONS
* Make sure the
safety strap goes over the pad. Adjust the length of the safety strap. Test
the locking mechanism by sliding the male connector into the female connector
and locking them together. Recheck all connections.
ANTI-TIP KIT INSTALLATION
Children have died from furniture tipover. To reduce the risk of furniture
tipover, ALWAYS install tip over restraint provided.
HARDWARE
ACTUAL SIZE
Find your wall material and
follow steps to attach the anti-tip kit to your wall.
Drywall or plaster with available wood stud:
– Holding the bracket 1” to 2” (25-50 mm) below top of dresser, mark the
attachment holes with a pencil.
– Drill 1/8-inch (3 mm) diameter pilot holes into the wood stud, on the pencil
marks.
– Following the appropriate pictogram instructions on the following pages,
drive two screws through the bracket and tighten screws firmly into the wood.
Drywall without available wood stud:
– Holding the bracket 1” to 2” (25-50 mm) below top of dresser, mark the
attachment holes with a pencil.
– Drill 3/8-inch (9 mm) diameter holes through the wall, on the pencil marks.
– Drive the plastic anchors into the holes, using a hammer if needed.
– Following the appropriate pictogram instructions on the following pages,
drive two screws through the bracket and tighten screws firmly into the
plastic anchors in the wall. Do not over-tighten.
If your wall material is not listed here, or if you have any questions,
consult your local hardware store.
Fasten bracket to back of changing table.
Place second bracket on the wall 1-2” (25-50mm) below the top
of the changing table and mark holes. 
Follow the “Find Your Wall Material” instructions on the previous page. Drill a 3/8″ (9mm) hole and insert plastic anchor into hole (If needed).
Fasten second bracket by
screwing into plastic anchors or wood stud.
Drywall without available wood stud.
* Drywall or plaster with available wood stud. Loop provided
tie through both brackets and secure tightly.
WEL COME HOME
WARNING
BEFORE USE
- Read all instructions before use of the changing table.
- Keep instructions for future use.
- Do not use changing table if it is damaged or broken.
- This product is not intended to be used as a changing table without adult supervision. Use of the product without this may result in death or serious injury to your child from falling. Follow all instructions on attaching and using the changing table.
- Recommended maximum weight of the occupant for which the changing table, is 30 lb (13.6 kg).
SUFFOCATION HAZARD
- Babies have suffocated while sleeping on changing areas: changing area is not designed for safe sleep. NEVER allow baby to sleep on changing area.
FALL HAZARD
- Children have suffered serious injuries after falling from changing areas. Falls can happen quickly.
- STAY in arm’s reach of your child.
- ALWAYS secure this unit to the support surface by using the provided hardware. See instructions.
REGISTRATION
Registering your product is simple.
MILLIONDOLLARBABY.COM/REGISTRATIONS
PART REPLACEMENT
If you would like to order replacement or missing parts, please visit us at,
MILLIONDOLLARBABY.COM/PARTS or you can contact us by mail at, 8700 REX RD.
PICO RIVERA, CA 90660
ONE YEAR LIMITED WARRANTY
Rest assured, your Million Dollar Baby Classic product is covered under
warranty for one year after the date of purchase. For more details on our
warranty policy, please visit,
MILLIONDOLLARBABY.COM/WARRANTY
CARE AND CLEANING
To clean wood or metal parts, use a lint-free, soft cloth with a non-toxic
cleaner. Wipe dry immediately. To avoid scratches or other damages, do not use
abrasive chemicals or materials. For fabrics, we recommend using a non-toxic
foaming fabric cleaner or leather cleaner where appropriate. Touch up kits are
available for purchase by contacting us at,
323-909-5019 or
MILLIONDOLLARBABY.COM/PARTS
STORAGE
Because materials respond to temperature and humidity, it is important to
store furniture in controlled environments. Furniture should not be placed in
direct sunlight or near air-conditioning outlets, radiators, heaters, or
humidiffers. Any changes such as extreme heat or cold, dampness, or dryness,
may cause noticeable shrinkage or swelling of wood. Direct sunlight may affect
the coloring of materials over time.
RESTRAINT SYSTEM
WARNING :
Secure your baby on the pad with the straps and buckle.
After changing, unbuckle the straps.
Never leave your baby unattended on the changing tray. ****
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>