WHITE LIGHTNINGA W11000010 Siliconized Acrylic Latex Elastomeric Sealant Instruction Manual
- June 9, 2024
- WHITE LIGHTNINGA
Table of Contents
WHITE LIGHTNINGA W11000010 Siliconized Acrylic Latex Elastomeric Sealant
Introduction
White Lightning® 3006 Ultra is a high-performance Siliconized Acrylic Latex Elastomeric Sealant ideal for interior and exterior applications. It’s formulated for filling joints where more movement is expected. White Lightning 3006 Ultra seals cracks between drywall, wood, glass, masonry, concrete, metal, porcelain and plastic.
- Excellent Flexibility – 70% Total Joint Movement
- Durable and Crack Resistant
- Superior Adhesion
- Cured Sealant is Mold and Mildew Resistant
WATERPROOF
| PAINTABLE| 
NTERIOR/ EXTERIOR|
WATER CLEANU P
---|---|---|---
PART #| UPC| COLOR| SIZE
---|---|---|---
W11000010| 0-23275-14761-4| White| 10 fl. oz.
W11000005| 0-23275-52493-4| White| 5.5 fl. oz
W11001010| 0-23275-14762-1| Clear| 10 fl. oz
W11001005| 0-23275-52494-1| Clear| 5.5 fl. oz.
W11004010| 0-23275-03068-8| Gray| 10 fl. oz.
W11005010| 0-23275-03069-5| Black| 10 fl. oz.
W11002010| 0-23275-03070-1| Almond| 10 fl. oz
W11006010| 0-23275-03071-8| Cedar| 10 fl. oz.
Physical Properties:
- Type: Acrylic
- Colors: White, Clear, Gray, Black, Almond, Cedar
- Shelf Life: 24 Months
- Flash Point: n/a (water based)
- Flammability: n/a (water based)
- Full Cure Time: 5 to 7 days at 75 ˚F
- Tack Free Time: 10 Minutes at 75 ˚F
- Application Temperature: above 40 ˚F
- Service Temperature: -30 ˚F to 180 ˚F
- Vehicle: Water
- Solids by Weight: 81.3% +/- .2%
- Weight/Gallon: 12.67 +/- 0.2 lbs/gal
- Painting: Paintable
- Primers: Not required
- Mildew Resistance: Excellent
- Water Resistance: Good
- Odor: Low
- Shrinkage: Low
Performance Data:
- Joint Size: 1/8″ x 1/8″ to 1/2″ x 1/2″
- Freeze-Thaw Stability: Passes Through 5 Cycles Shelf Life: 24 Months
- Cleanup: Water; promptly clean tools and excess caulk with water or a damp cloth.
- Flexibility: Excellent; 70% Total Joint Movement Linear Coverage 10 oz. cartridge 24′ at ¼” wide by ¼” deep bead; 5.5 oz. squeeze tube 12′ at ¼” wide by ¼” deep bead
- Painting: A minimum of 2 hours dry time is required before painting with latex- or oil-based paint. Allow extra dry time during periods of high humidity and/or cool temperatures.
- NOTE: Acrylic Clear will apply appearing milky white and dry clear when fully cured.
ASTM:
Exceeds ASTM C-920, Class 35. Exceeds performance requirements of Federal Specification TT-S-00230C Type II Class A. Tested at Riverbank Acoustical Laboratories in accordance with ASTM E90 and C-919, this product was sound tested and proven to be an integral component in maintaining STC/MTC partition ratings. It has also been tested in accordance with ASTM C-Stet and D-217
White Lightning® 3006 Ultra® has achieved GREENGUARD Gold Certification.
Application:
- Remove all existing caulk.
- Clean thoroughly to remove all loose material, grease, dirt, oil, wax, loose paint, dust and soap film.
- Remove mold/mildew with bleach (4:1 mix, water to bleach) and detergent that does not contain ammonia. Rinse surfaces and allow to dry.
10 oz. Cartridge
- Cut nozzle tip at a 45° angle.
- Load cartridge into caulk gun.
- Squeeze trigger to start flow of caulk and work caulk into joint.
- Smooth caulk with proper tool.
5.5 oz. squeeze tube
- Remove cap, cut tube tip at a 45° angle.
- Squeeze tube to start flow of caulk and work caulk into joint.
- Smooth caulk with proper tool
Cleanup:
Water; promptly clean tools and excess caulk with water or a damp cloth.
Cautions:
See SDS.
Limitations:
For best results, apply at temperatures above 40 °F and allow 24 hours to cure before exposing to moisture. Do not apply to frozen or frost-covered surfaces. Not for use below grade, on aquariums or for marine use below the water line.
LIMITED WARRANTY:
This warranty is made to you, the property owner purchaser, and is only
transferable by a contractor, if the contractor purchased and applied the
product to the property for you. If the product fails to perform in accordance
with applicable product literature for as long as you own the property, White
Lightning shall either replace an equivalent quantity of product free of
charge or refund the original purchase price upon presentation of proof of
purchase. For a replacement or a refund, please visit the store where the
product was purchased or contact customer service at
1-800-241-5295. This warranty shall not
apply to any defect, damage or product failure resulting from improper surface
preparation, structural defects, environmental damage, failure of a previous
product, deterioration or defect in the underlying substrate, or improper
application of the product. Your exclusive remedy, and White Lightning’s sole
liability under this warranty is the replacement of product or refund by White
Lightning and does not include labor or costs associated with the application
or removal of any product. IN NO EVENT SHALL WHITE LIGHTNING BE LIABLE FOR
ANY TYPE OF INCIDENTAL, CONSEQUENTIAL, SPECIAL, EXEMPLARY, PUNITIVE, OR
INDIRECT DAMAGES WHETHER OR NOT PURCHASER IS ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. ALL IMPLIED WARRANTIES, INCLUDING WARRANTIES OFMERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO A ONE-YEAR PERIOD FROM
THE DATE OF PURCHASE.
Some states do not allow limitations on how long an implied warranty lasts
or limitations on incidental or consequential damages, so portions of the
limitations above might not apply to you. This warranty gives you specific
legal rights, and you may have other rights, which vary from state to state.
Customer Support
For more information, please call or write:
White Lightning Products 101 W Prospect Ave., Cleveland, OH 44115
1-800-241-5295 Option 1 Customer
Service • 1-800-241-5295 Option 2
Technical Service
wlcaulk.com
Documents / Resources
|
WHITE LIGHTNINGA W11000010 Siliconized Acrylic Latex Elastomeric
Sealant
[pdf] Instruction Manual
W11000010 Siliconized Acrylic Latex Elastomeric Sealant, W11000010,
Siliconized Acrylic Latex Elastomeric Sealant, Latex Elastomeric Sealant,
Elastomeric Sealant
---|---