TRETTITRE T-LP8 Bluetooth Turntable User Manual

: June 9, 2024
: TRETTITRE

Table of Contents

ASSEMBLING THE PRODUCT
BOX CONTENTS
NOTES ON USE
SPECIFICATIONS
REPLACING THE STYLUS
MAINTENANCE
Warranty:
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

BLUETOOTH TURNTABLE
Discover The Beauty of Sound
T-LP8

ASSEMBLING THE PRODUCT

This product requires some assembly before using it for the frst time. Do not connect the AC adapter until assembly is complete.

Mount the product on a level surface.
Place the belt on the motor pulley.
Set the platter on the spindle.
Set the felt mat on the platter.
Remove the cable tie used to secure the tonearm at the time of delivery.
Remove the cartridge’s protector.
While lightly holding the headshell and take out the tonearm.
Lower the tonearm by moving the tonearm lift control lever to the DOWN position.
While still lightly holding the headshell, turn the counterweight to adjust the tonearm’s balance.
While supporting the counterweight so that it does not move, turn the tracking force gauge ring so that its 「0 」position lines up with the centerline on the back of the tonearm.
Turn the counterweight and the tracking force gauge ring together counterclockwise (to the left) until the centerline value matches the recommended tracking force value for the cartridge you are using.One full turn, the tracking force value is 2g; continue to rotate, the tracking force value is >2g.
Place the record on the felt mat so that the center hole aligns with the spindle.
Set the platter rotation speed (33/45) to match that of the record.
Connect to Power. Rotate “ON/OFF” button to start.
Connect the RCA audio cable to a compatible input jack on the connectable equipment you are using (amplier, receiver, active speakers, sound card, etc.)
Set your Bluetooth headphones, speakers, etc. to pairing mode. Press the bluetooth button and your bluetooth device will pair automatically in a few seconds.
Tip: In pairing mode: the orange indicator light Flashing;Pairing successful: the orange indicator light remains on. If pairing is not properly completed, follow the above steps again from the beginning.

BOX CONTENTS

Turntable Body
Dust Cover
Felt mat
Platter (With Drive Belt- Power Adapter
USB Type-C Cable
RCA Audio Cable
User Guide

Make sure that you have all the included items listed below before using this product.

NOTES ON USE

Turntable Body

Make sure all items listed in are included in the package.
Do not set and use the product in locations that are considerably hot or humid, dirty, or subject to extreme vibrations.
The product should be positioned on a at, level surface.

Cartridge

Do not touch the stylus of the cartridge with your finger.
Do not allow the stylus to bump against the platter, felt mat,or edge of the record.

SPECIFICATIONS

Model: T-LP8
Input: USB-C 5V 1A
Speed: 33-1/3RPM, 45RPM
Bluetooth: 5.0
Output: RCA
Turntable Platter: Die-cast Iron
Motor: DC Servo Motor
Drive Method: Belt Drive
Tonearm: One-piece Carbon Tonearm
Effective: 219mm
Cartridge: Audio-Technica MM ATN-3600L
Tracking Force Range: 2~2.5g
Material: Wooden Cabinet
Size: 350 450 115mm
Weight: 8kg

REPLACING THE STYLUS

In addition to the deterioration of sound quality, records may also be damaged as the cartridge’s stylus tip wears down.
As a rule of thumb, replace the stylus after 400 hours of use.
Be sure to disconnect the product’s AC adapter from the outlet.
When replacing the stylus, hold the headshell and the cartridge body tightly.
The standard tracking force value for the cartridge provided with this product is 2.0-2.5g.

Rotate the front of the stylus in a forward and down motion.
Mount the new replacement stylus to the cartridge.
Lift the stylus up until you hear a click.
Make sure there is no gap between the headshell and the cartridge.

MAINTENANCE

Turntable Body

When the turntable body is dirty or dusty, First disconnect the adapter, and then wipe off the dirt and dust with a soft, dry cloth.
Do not use benzenes, thinners, etc.
When storing the product for a long time, disconnect the adapter from the outlet and wrap the product in plastic; do not allow it to become damp.

Cartridge

If dirt and grime are stuck to the stylus tip, clean it with a commercially sold brush.
We recommend using a stylus cleaner (sold separately) if the stylus tip is considerably dirty. Clean the stylus tip by moving the brush from the rear to the front of the stylus tip.

Warranty:

TRETTITRE warrants all products to be of the highest quality in material, craftsmanship and service, effective from the date of purchase to the end of the warranty period.
TRETTITRE will replace any product found to be defective due to manufacturer fiaws based on eligibility. Refunds are available within the First 30 days of purchase. Refunds are only available to the original purchaser of the product. This warranty extends only to personal use and does not extend to any product that has been used for commercial, rental, or any other use in which the product is not intended for. There are no warranties other than the warranties expressly set forth with each product. This warranty is non-transferable. TRETTITRE is not responsible in any way for any damages, losses or inconveniences caused by equipment failure caused by user negligence, abuse, or noncompliance with the user manual or non-compliance with any additional safety recommendations or warnings included in the product packaging and manual.
What is not covered by the warranty:

The warranty immediately becomes void if the product has been tampered with, repaired or modified by non-authorized personnel.
Damage (accidental or otherwise) to the product that does not impact the product’s operation, including but not limited to rust, change in color, texture or finish, wear and tear, and gradual deterioration is not covered.
Damage caused by accident, abuse, natural disaster, intentional or accidental misuse, fire, neglect or improper maintenance, and use under abnormal conditions is not covered.
Products that have exceeded the warranty service period stipulated by our company are not covered.
The warranty immediately becomes void if the original serial number is removed, obliterated or altered from the product.
Packaging and attached accessories, services and additional configurations other than those promised by the salesperson are not covered.
The warranty immediately becomes void if the instructions in the user manual are not followed.

e-mail: ttt@trettitre.com

MANUFACTURER: TRETTITRE (SHENZHEN) TECHNOLOGY CO., LTD.
MANUFACTURER ADDRESS: 903-905, Bldg A, Zhonghengsheng Hightech Park, No.3, Xinyu Road, Xinqiao Community, Xinqiao Street, Baoan District, Shenzhen, CN
trettitre_officials trettitre_sound Trettitre Trettitre trettitre_sound

https://www.trettitre.com
© 2022 TRETTITRE. All Rights Reserved. Designed and developed by TTT.
wwww.trettitre.com