JIRENO CUBE4 Projector User Guide
- June 9, 2024
- JIRENO
Table of Contents
JIRENO CUBE4 Projector
PRODUCT INTRODUCTION
Bluetooth Speaker Switch Button: Press once to turn on/off Bluetooth speaker
mode.
Near Focus Adjustment Button: The function of zoom in.
Far Focus Adjustment Button: The function of zoom out.
Menu Button: Press once to set more options which depend on the media source.
Settings Button: Press and hold for 2s to enter the system settings.
Voice Button: Press and hold to perform voice control.
<+> Remote Controller Pairing: Place the remote control close to the projector
(within 20cm), press and hold the Left Direction Button and the Right
Direction Button at the same time to pair with the projector.
SPEAKER MODE
- You can use the device as a Bluetooth speaker. A. Turn on the speaker mode
- CD Turn on the speaker mode: Long press the On/Off button on the top of the projector, or press the Bluetooth speaker switch button of the remote controller once.
- @Connection: Turn on the Bluetooth on your mobile phone, and choose [Ji reno CUBE4] as the device to be added.
- Exit the speaker mode CD Switch to the projection mode: Press the Back button/HOME button of the remote control once.
- @Shutdown: Press the On/Off button on the top of the projector once, or press the power button of the remote controller once.
IMAGE FOCUS
- Auto Focus Turn on the auto-focus in the settings. The image clarity can be adjusted automatically within the range of the projection.
- Remote Control Focus The image clarity can be adjusted by controlling the near focus and far focus function of the remote control.
IMAGE ZOOM
Select the electronic zoom and follow the instructions on the screen to zoom in or zoom out the projected image size.
KEYSTONE CORRECTION
- Automatic Keystone Correction Tum on automatic keystone correction in the settings, and the projected image can be corrected automatically when placed at different angles.
- Four Point Keystone Correction Select four point keystone correction and follow the instructions on the screen.
SAFE INSTRUCTIONS
- Please use the dedicated power adapter. When connecting to the power source, please plug in the projector’s DC port first, and then plug in the power socket. Unplug the power cord if the product is not going to be used for a long time.
- Do not charge other device via the USB port and the Type-C port.
- Please ensure that children use this projector under supervision.
- Do not look directly into the lens of the projector while the projector is operating, as the intense light may hurt your eyes.
- Please make sure that no object covers or blocks the front and rear vents to avoid affecting the heat dissipation of the product.
- To reduce the risk of fire or electric shock, the product should be prevented from water drenching, splashing, or prolonged exposure to humid environments.
- The surface of the product may become hot after running for a long time. Please turn it off immediately and disconnect the power supply. After the product has cooled down completely, you can restart it for use.
- Pay attention to the positive and negative poles when replacing the batteries of the remote controller.
- It is recommended to dispose of used batteries in accordance with the instructions on the batteries or the local requirements.
Do not dismantle the projector by yourself, otherwise the warranty will become void. Do not attempt to repair the projector by yourself if it is found to be faulty, and please contact our customer service. The device is only applicable for safe use in an environment with the altitude less than 2000m. When used in an environment with the altitude above 2000m, there may be a safety hazard. Disclaimer: Our company reserves the right to modify any content in the user manual without prior notice. This product will go through continuous software optimization. For the product function and interface, please in kind prevail.