PETITPUK George Low Rise Version Bunk Bed Instruction Manual
- June 2, 2024
- PETITPUK
Table of Contents
PETITPUK George Low Rise Version Bunk Bed
Congratulations on your PETIT PUK BED!
Now it’s assembly time. Please make sure to check these elements prior to
starting:
- is everything complete?
- are all pieces in good shape?
- good spirits and perhaps a partner in crime in your presence?
- ready to take a photo of your great work afterward, to share it with us?
- ticked all boxes with yes? Ready, steady, 9000!
PS. A tip
You will find small green glue tubes with EU standards. Just slide a small
amount of glue into the holes to receive the wood dowels. Glue is only
necessary at the level of beveled wood stud assemblies for perfect stability.
It is not necessary to put glue on the bed base which would prevent you from
dismantling the bed afterward.
Important!
Please note on which side you mount the long beam with the holes for the
ladder holder. It has an effect on which side the ladder will
be.
INSTALLATION
All other openings must be covered with plugs.
DRAWER
CLIMBING WALL
Assembly Manual PETIT PUK
Yeah, great job!!
We hope you are happy with the results too! Don’t forget to share a photo with
us, it makes us incredibly happy to see the results in our mailbox or on
Instagram with #petitpuk
Please remember this
- Use only a mattress with a thickness is 8-14 cm height.
- Beds are for sleeping, not for jumping
- Prohibit more than one person on the bunk bed.
- Do not hang on construction components.
- Wooden and plastic parts should be cleaned with a dry cloth and ordinary, mild care and cleaning of raw wood
- Bed parts have a warranty for 2 years under normal use.
- If necessary, contact PETIT PUK indicating your name and order number, accompanied by photos of the situation
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>