WLIVE ASNG044 Fabric 5 Drawer Low Storage Cabinet with Open Shelf Instruction Manual

WLIVE ASNG044 Fabric 5 Drawer Low Storage Cabinet with Open Shelf

GENERAL GUIDELINES

• Please read the following instruction carefully and use the product accordingly.
• Please keep this manual and hand it over when you transfer the product.
• This summary may not include every detail of all variations and considered steps. Please contact us when further information and help are needed.

NOTES

• Please follow the assembly instructions precisely and only use the product as intended.

• If an odor is present when first opening the package, please leave the unwrapped product in a shaded and ventilated area for a few days to air out.

• Prior to assembly, please check the product for defects or missing accessories. If any
  defects are found or accessories are missing, do not use product as damage or injury may occur; Please contact us for assistance and replacement.

• During assembly, please only slightly tighten all screws in their correct position first, then fully tighten them. A Philips screwdriver is recommended but not included.

• It is suggested you regularly check the products bolts and connections to ensure safe use.

• Assemble the item on a soft flat and clean surface to avoid scratches and damage.

• It is recommended that two people assemble this product.

WARNINGS

• During assembly, keep parts and packaging materials away from children and pets as there could cause injury and are a potential choking hazard.
• Avoid sharp objects or corrosive chemicals to prevent damage to the product.
• Please open the item slowly and cautiously to avoid pinching your hands by metal joints, especially children.

ANTI-TIP WARNING

• Serious or fatal crushing injuries can occur from furniture tip-over. To prevent this furniture from tipping over it must be permanently fixed to the wall.
• Since different wall materials require different types of fixing device, for advice on suitable fixing systems, contact your local specialized dealer.

If you have any further questions, please feel free to contact us by email or official website: [email protected] We will reply ASAP.

Before installation, please make sure you have all the hardware, the serial numbers are properly labeled corresponging to the list, and the quantity is correct.

Enjoy your new purchase!

EXPLODED DRAWING

PARTS

INSTALLATION

REMARK

1. Put a blanket under the board to avoid scratch or damage.
2. The shaded parts are on the same side.
3. Please do not fully tighten screws until all screws are in place.

REMARK
Please do not fully tighten screws until all screws are in place.

REMARK

1. Please do not fully tighten screws until all screws are in place.
2. Please note the hole position of Part 3 indicated in the picture should be faced up.

REMARK

1. Please do not fully tighten screws until all screws are in place.
2. The shaded parts are on the same side.

REMARK

1. Please note the side with smaller hole of Part 6 indicated in the picture should be faced up, the other side with larger hole should be faced down.
2. Please do not fully tighten screws until all screws are in place.

REMARK

1. Please do not fully tighten screws until all screws are in place.
2. The shaded parts are on the same side.

REMARK
Please do not fully tighten screws until all screws are in place.

Please install the anti-tip device as following steps if you need

STEP

1. REMARK
   Please choose the proper position before assembling.

2. 

3. 

4. 

[email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>