SPtools SP80020 Diagnostic Pump Kit User Manual

SPtools SP80020 Diagnostic Pump Kit

IMPORTANT
ALL PERSONS WHO ARE TO USE THIS EQUIPMENT MUST THOROUGHLY READ AND UNDERSTAND THIS INSTRUCTION MANUAL PRIOR TO OPERATION.

INTRODUCTION

Operation – Vacuum Mode

1. Set the rotating sleeve to the vacuum position
2. Attach the vacuum hose to pump
3. Select and attach the required accessory fitting
4. Connect the pump to the system to be tested
5. Operate pump to generate required testing vacuum
   • Test Fuel Pressure Regulator
   • Test Manifold Vacuum

Additional application examples

Test:

• EGR valves
• Fuel pressure regulators
• MAP sensors
• Thermal vacuum switches
• Electric vacuum switches
• One-way vacuum valves
• Heating and ventilation control valves
• Automatic transmission modulator valves
• Central lock systems

Operation – Pressure Mode

1. Set the rotating sleeve to the pressure position
2. Attach pressure hose to pump
3. Select and attach the required accessory fitting
4. Connect the pump to the system to be tested
5. Operate pump to generate required testing pressure
   Test and Adjust Turbo Charger Waste Gate Actuator

Additional application examples

Test:

• Turbocharger wastegate actuator
• Fuel tank vent valves
• Fuel pressure regulators
• Thermal switches
• Electric switches
• Small engine fault diagnosis and repair

LIMITED WARRANTY

This Limited Warranty applies only to new products* distributed by SP Tools Pty Ltd (“SP Tools”). It is a condition of this Limited Warranty Policy that the purchaser read the owner’s manual for the product and only use the product to the extent or for the purposes stated therein. The purchaser must also ensure that all servicing requirements are completed as listed in the owner’s manual (said servicing is at the owner’s expense). We recommend that all servicing is conducted by an authorised service agent and that records of said servicing are retained by the purchaser as proof in the event of a warranty claim.

While the owner’s manual, packaging, and/or other documentation supplied with SP Tools’ products may provide details in respect of a Limited Warranty, the terms set out herein supersede these matters, and this Limited Warranty applies in their place. This warranty is no less advantageous than otherwise described in such other documentation.
SP Tools agrees, subject to the terms and conditions specified below, to repair or replace at SP Tools’ cost, the product purchased by you when the product does not perform in accordance with its specifications during the limited warranty period, due to any fault in manufacturing, materials, and workmanship. SP Tools is not liable to repair or replace products that the purchaser uses in a manner that is inconsistent with the owner’s manual or in the circumstances set out in paragraphs 1.1 – 1.7 below.

The benefits to the purchaser under this warranty are in addition to other rights and remedies under the Competition and Consumer Act 2010 (Cth). The limited warranty period, within which a defect in the product must appear, commences from the date of purchase and ceases on the expiration of the specified term below.

THE LIMITED WARRANTY PERIOD

• SP Speciality Tools – 12 Months

THE PURCHASER’S ATTENTION IS DRAWN TO THE FOLLOWING
To the extent permitted by law and subject to this Limited Warranty, and as part of the terms of the sale of the equipment or part thereof: SP Tools shall not be liable for any form of loss, damage, cost, injury, or harm of any kind (whether direct, indirect, special or consequential) howsoever arising from the use or supply of the equipment to the purchaser.

EXCLUSIONS TO LIMITED WARRANTY POLICY
This Limited Warranty will not apply where the equipment or any part thereof:

1. Fails due to an accident (including liquid spillage), abuse, misuse, neglect or normal wear and tear;
2. Has been used in a manner other than for which it was originally designed;
3. Has been tampered with or is otherwise than as supplied by SP Tools;
4. Where any damage, malfunction, or another failure of the equipment or any part thereof resulted directly or indirectly from unauthorized persons, adjusting or failing to adjust any part requiring normal maintenance and service (examples include adjustment of tappets, air filter maintenance, lubrication and tightening of screws nuts and bolts);
5. Malfunctions due to the use of defective or incompatible accessories;
6. Is damaged by lightning or thunderstorm activity; or
7. Has been transported to a country where no authorised Service Agents exist.

CLAIMING WARRANTY
This Limited Warranty may be claimed in the following manner:

1. In order to make a claim under this Limited Warranty, the purchaser must deliver the equipment or any part thereof to an SP Tools authorised repair agent and pay all costs of transportation and all costs incidental to making a claim under this Limited Warranty. The purchaser must first contact SP Tools (contact details described above) and request the delivery address of an SP Tools authorised repair agent.

2. The purchaser must deliver to the repair agent written reasons why the purchaser considers that the purchaser has a claim under this Limited Warranty and must provide all necessary details, including:

   • The place, date, and from whom the unit or part was purchased.

   • The unit or part involved Model and Serial Number.

   • The defect, malfunction, or failure in respect of which the claim is being made.
     Proof of service of the unit or part (if applicable)

   • Proof of purchase in respect of the unit or part.

3. If the Limited Warranty claim is valid, the repair agent will carry out repairs and return the product at no charge to the purchaser. These repairs are limited to the Limited Warranty fault identified and as such will not include any other faults due to misuse, abuse, failure to maintain, fair wear and tear, or the replacement of serviceable items such as oil, spark plugs, air filters, fuel, etc.

Our goods come with guarantees that cannot be excluded under Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Note:
Units which are failing to perform in accordance with specifications due to non-warrantable causes will be subject to freight, repair, and or quote charge.

NOTE:
Proof of purchase must be retained by the customer as it will be required in the event of a claim under warranty.

AUSTRALIA:
Visit the website’s contact page to get in touch with your local service department.

INTERNATIONAL:
Use the county selector to get in touch with your service department in your country or region.

WWW.SPTOOLS.COM.

References

• SP Tools USA

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>