ORIEN Wifi RGBW LED Bulb User Guide
- June 3, 2024
- ORIEN
Table of Contents
ORIEN Wifi RGBW LED Bulb
We appreciate the trust and confidence you have placed in OREIN through the purchase of smart bulbs. We strive to continually create quality products designed to enhance your home. Visit us online to see our full list of products available for your home Improvement needs.
Basic Information
- Suitable for damp locations.
- For lamps whh a weight significantly higher than that of the lamps for which they are a replacement, attention should be drawn to the fact that the lncreHed weight may reduce the mechanical stability of certain luminaires and lamp holders and may Impair contact-making and lamp retention.
- The bulb Is beHd on protocol WlFI, realizing the function of on/off, brightness dimming, run-able white, and RGB color changing.
- CONTROL YOUR LIGHTS FROM ANYWHERE in the world from the palm of your hand. Ore in produces beautiful high-quality light that you can dim, or tune the light’s color temperature from 1800 to 6500K as well as RGBW color changing with 1 million colors and control from your smartphone or tablet. Easy to set up, bulbs fit into your standard household sockets – no need for installation by an electrician. A wireless network is required to operate bulbs.
- SET LIGHT SCENES : Crete rich indirect light scenes in your home by dim. Schedule to turn on the lights so you don’t come home to a dark house. Set automated timers, or program the bulb to gradually increase brightness in the morning like the sunrise for a more pleasant, natural alarm.
- SAVE ENERGY : OREiN bulbs use up to 84% less energy than traditional incandescent bulbs and last up to 25,000 hours making them a smart choice for energy-conscious homes
Quiet Start Oulde
The following are the general user guide
- Screw the bulb Into a standard socket.
- 8rum on the bulb wilh your wall switch to apply power to the bulb.If you’re not using a wall switch, then use your alternate method to apply power to the bulb.
- Get the AiDot App for Android or iOS.
- Create an account and sign in, enable your location and open your Bluetooth
- Press’+’ button to add the light bulb.
- Automatic discovery devlces which to be added(through BLE protocol), then follow the instructions on App
Resetting Bulb
Restore the bulb(s) to factory default by switching 6 times
- Starting from wall switch OFF
- The user flips the wall switch off and on Sx over between 1-2 seconds
- Light(s) finishes on
- Light blinks twice
- Usar connects light(1) to new network (remote)
- Light(s) added to device list as new Or after 5 min network close, restarted by wall switch. Then light(s) finishes on(step 3).
Safety Instructions
Restore the bulb(s) to factory default by switching 6 times.
- Switch off the power supply to the socket and allow sufficient time for the bulb to cool before removing the bulb from the fitting
- Warning: Risk of Electric Shock. Do not attempt to disassemble bulb
- Not suitable for use with standard wall dimmers
- Suitable for use in operation environment between -4°F and 104°F(-20°C and 40°C)
- Not for use in emergency lighting
- The bulb is not suitable for totally enclosed fixtures.
- Do not clean the bulb when it is on and connected to the power supply
- Do not place the bulb on hot surfaces
- Dispose of this device in accordance with disposal laws in your area.
- For additional help, regulatory and safety Information, please go to: www.iorein.com
CAUTION
- DO NOT USE WITH STANDARD DIMMERS, SEE INSTRUCTIONS
- NOT FOR USE IN TOTALLY ENCLOSED LUMINAIRES
- SUITABLE FOR DAMP LOCATIONS
THIS DEVICE IS NOT INTENDED FOR USE WITH EMERGENCY EXITS
Only use the control provided with or specified by these instructions
tocontrol this lamp. Ihis lamp will not operate properly when connected toa
standard (incandescent) dimmer or dimming control.
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. that interference will not occur in a However, there is no gua
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm distance between the radiator and your body: Use only the supplied antenna.
SYVIO TECHNOLOGY CO., LIMITED Room A, 8/FKwok Cheung Building, 635-637
Shanghai Street, Mong Kok, Hong Kong
300 Technology Court SE Suite 100,Smyrna, GA 30082
678-293-8382
www.iorein.com
Support@iorein.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>