ANESOK G52 Endoscope Instruction Manual

ANESOK G52 Endoscope

Product Description

G52 is a high-performance dual system industrial endoscope with a 5.0″ HD color display, which is synchronized with the cell phone for online image display. It adopts ergonomic design, which makes it easy to operate. Self- storage, support for photo and video functions, also the TF card expansion function (up to 128G). This product is equipped with a small diameter HD camera with LED auxiliary lighting. The camera adopts a high-sensitivity chip, which can be used normally even in a dark working environment.

Safety and Maintenance

• The product is an industrial endoscopy camera and is not intended for medical use or human examination.
• Do not hit the camera violently and do not pull the cable.
• When used in an environment with sharp bumps, please use it carefully to prevent the waterproof protective layer of the probe from being scratched.
• The camera probe is not made of heat-resistant and high-temperature materials. When checking the automobile engine, please ensure that the temperature in the engine drops to the normal temperature.
• When not in use, please ensure that the lens and the main unit are clean and dry, and avoid contact with oil, etc. or other corrosive and dangerous substances.
• This product is not suitable for people with limited physical, sensory or mental abilities.
• Do not allow children to touch and operate this equipment

Battery instructions

• Please use a 5V household charger that meets the safety regulations to charge the equipment. Fast charging is not supported.
• This device supports charging while using.
• If the device is not used for a long time, please ensure that it is charged at least once every 3 months to prevent irreparable damage caused by excessive discharge of the battery

Function introduction

1. Camera switch
2. Still screen
3. Image contrast
4. Colorand black and white switch
5. Setting key:
6. Enter
7. Exit the setting interface
8. Back key:
9. Go back
10. Up selection key:
11. Up
12. Zoom in
13. Video playback fast forward key
14. Confirm key:
15. When confirming the selection
16. Output interface, call up the secondary menu page (camera switching, picture still, image comparison, color and black-and-white switching)
17. In photos album, long press the button to pop up operation menu(Cloud transmission, Delete Files, Delete all）
18. Switch:
19. Press and hold for 3 seconds to turn on/Off
20. Adjust the light:
21. Adjust the brightness of the camera LED
22. Down selection key:
23. Scroll down
24. Picture rotation
25. Video playback back key
26. Taking photos:
27. Short press to take photos
28. Long press to record
29. Charging interface
30. Indicator
31. TF card slot

Instructions

1. Press the hose lock button
2. Insert hose connector, rotate to secure
3. Long press power button for 3 seconds to power on / off
4. Use the type-C charging cable to charge the device

I nsert TF card:

• Please insert the TF card in the off state
• Please pay attention to whether theinsertion direction and front and back sides of TF card are correct
• Do not use excessive force when inserting or pulling out the TF card to prevent damage to the card slot structur

Language settings

The default language is English, and the system also supports English, Simplified Chinese, German, French, Spanish, Russian, Japanese, Korean

1. Press setting button to enter the setting page
2. Select the language setting
3. Press the up and down button to select the desired language
4. Press setting to save

Enter the picture-outputting interface

• Press the camera icon to the picture outputting interface, short press the photo icon to take pictures/long press to record video
• In the interface, short press the OK button to call up the secondary menu page (camera switch, still screen, image contrast, color and black and white switch)

Cell phone connected to wifi for picture outputting

Install APP

Method 1: For iOS users, please search “ANESOK” in App store, download and install it. System support (IOS9+)
For Android users, please search “ANESOK” in Google Play Store, download and install it. System support (Android4.4+)
Method 2: Scan the QR code, choose to download the APP. System support (Android4.4+, iOS9.0+)

WiFi connection

Step 1: click on the home page to enter WiFi
Step 2: press the OK key to turn on / off WiFi of the device

Enter the setting interface, turn on the WLAN switch, link the WiFi hotspot “ANESOK-XXXXX”, return to the desktop and open the “ANESOK” app

APP Introduction

1. Setting
2. Enter the picture outputting interface
3. WiFi connection status prompt
4. Enter photo album
5. Screen rotation
6. Screen resolution adjustment
7. Enter photo album
8. Color and black and white mode
9. Image comparison
10. Battery indicator
11.  Take a photo / Record a video
12. Camera switch

1. Photo
2. Video
3. Generate PDF documents
4. Download from the cloud

Copy picture and video files
You can use TF card reader to copy directly, cell phone to connect the device WIFI to download to cell phone

If the phone is connected to the device with wifi,Enter the device “Image Information”, select the file to be transferred, and press and hold “OK” to select cloud transfer to send the file

Charging Guide

1. Connect the device to the TYPE-C USB adapter for charging(5V 1A/5V 2A).
   The product does not support fast charging.

2. During charging, the red LED indicator will remain on for a long time.

3. When the device is fully charged, the red LED will turn off.

FAQ

1. The product does not output a picture or the screen turns black
   Remove the flexible conduit joint, reassemble and tighten it, or restart the device.

2. Lags happened during the photo outputting of the product
   Step 1: Keep the distance between the WiFi Industrial Endoscope and the phone/tablet within 10M
   Step 2: Please check whether the product is fully charged, or restart the device or reassemble the camera connector.

3. Product crash
   Please press the reset button on the back of the device, restart the device.

4. Imaging screen is not clear
   The best imaging focal length of the product is: 2cm-15cm, please calibrate the distance to the object, or clean the front of the camera with a clean alcohol cloth.

5. Product charging
   Please use 5V 1A/5V 2A charger to charge the device. The product does not support fast charging.

6. How to output picture on the phone
   Step 1: Enter the cell phone connection menu on the Home page, press OK button to turn on WiFi
   Step 2: Download APP
   Step 3: Enter the WiFi interface in the phone settings, find the device WiFi, ANESOK-XXXX, click it and connect.

7. TF card can not be recognized
   Please confirm whether the TF format is FTA32 . If not, please format it and do not recognize it. Please plug and unplug the TF card again

8. Insert TF card

9. Please insert and remove TF card in the off state

10. Please pay attention to the TF card in and out of the direction and front and

11. Please do not use excessive force to avoid damaging the card slot structure when operating

12. The device supports Class 10 high-speed memory cards, while does not support Class 4 low-speed cards

Accessories installation Guide

Specifications

Camera

LEDs

| 4 adjustable brightness

LEDs

|

6+1 adjustable brightness LEDs

|

6+1+1 adjustable brightness LEDs

Focusing range

| A Camera| 20-100mm| 20-150mm| 20-150mm
B Camera|  | 20-50mm| 20-50mm
C Camera|  |  | 20-50mm

Other

FCC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note : This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>