FAKRO VMZ Z-Wave Remote Solar Vertical Screen Awning User Manual
- June 3, 2024
- FAKRO
Table of Contents
FAKRO VMZ Z-Wave Remote Solar Vertical Screen Awning
INSTALLATION INSTRUCTIONS
| Before installation, it is compulsory to read the NC9AP ,,ORIGINAL
INSTRUCTIONS 2/3 Installation and user manual”.
---|---
la
| Remove the cover strips and plastic guide rails from the guide rails.
1b
| Connect the side aide rails to the awning cassette.
2a
| Place the awning in the window opening.
2b
| Check the correctness of the awning installation.
3
| Screw the awn in to the window or to the I inn .
4a
| Place the cover strips in the guide rails.
4b
| Screw the cover strips.
5a
| Place the plastic guide rails in the side guide rails.
5b
| Make sure that the lock is properly positioned in the guide rail.
6a
| Place the outer cover strips in the guide rails.
6b
| Screw the cover strips.
7a
| Connect the awning to the network using the 15VDC power supply.
7b
| Operate the awning using remote control or buttons on the awning.
8a,8b,8c,8d,8e,8f
| If required, adjust the end positions of the awning.
Manufacturer and Seller shall bear no liability for failure to comply with the applicable laws, building codes and safety requirements by the user of the product, architect, fitter or owner of the building.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>