TOSOT GPC05AP-A3NNA1A Portable Air Conditioner User Guide

June 3, 2024
TOSOT

TOSOT logo

TOSOT GPC05AP-A3NNA1A Portable Air Conditioner

GPC05AP-A3NNA1A Portable Air Conditioner
User Guide Quick Start Guide for Portable Air Conditioner

GPC05AP-A3NNA1A Portable Air Conditioner

Please allow the unit to sit upright for at least 3-4 hours before powering on.
These are basic instructions to help you quickly set up your unit. For full pictures and a more detailed explanation, please read the user manual. If there are any missing or damaged parts, please contact us directly for replacement.

Window installation

TOSOT GPC05AP-A3NNA1A Portable Air Conditioner - fig 1

TOSOT GPC05AP-A3NNA1A Portable Air Conditioner - fig 2

a. Cut the Foam seal to the  proper length and attach it to your horizontal (orvertical) sliding window.
b. Slide the panels into the window panel and adjust to fit your window.

TOSOTOSOT GPC05AP-A3NNA1A Portable Air Conditioner - fig 3T GPC05AP-A3NNA1A
Portable Air Conditioner - fig 3

The window panel adapts to different window sizes that open horizontally or vertically.
Three panels are included in the package. For window openings over 28 inches, please use the adjustment panel to make sure you can span the entire length of your window. You can add an extension panel if the window opening is more than 46 inches.
After the length is set, secure the panels with a fixed clip and mounting plate.
For certain windows, such as a casement window, you will need to improvise several steps of the installation.
Note: Insert the fixed clip into the groove of the adjustment panel and screw down the mounting plates.

Connect the exhaust hose

TOSOT GPC05AP-A3NNA1A Portable Air Conditioner - fig 4

TOSOT GPC05AP-A3NNA1A Portable Air Conditioner - fig 5

TOSOT GPC05AP-A3NNA1A Portable Air Conditioner - fig
10

a. Twist the Joint and Rear clip clockwise onto the exhaust hose. b. Insert the Joint into the groove at the back of the unit and extend the exhaust hose.c. Attach the Rear clip to the window panel.

Important tips before first use

TOSOT GPC05AP-A3NNA1A Portable Air Conditioner - fig
11

a. Allow the unit to sit upright for at least 3-4 hours before powering on to allow the refrigerant to stabilize.
b. You can manually adjust the air vent on the front of the unit to adjust the direction of airflow.
c. Check the power plug and cord before operation to make sure it is not damaged.
d. Always perform a test of the LCDI plug before use.

Note: Plug may be different with the actual product. Please refer to actual product.

Frequently asked questions

a. Do I have to vent the hot air out?****

– Yes, the hot air has to be vented outside through the exhaust hose. If you don’t connect the exhaust hose, your unit will exhaust hot air into the room that you are trying to cool.

b. Do I have to drain the collected water?****

– TOSOT portable air conditioner comes with the auto-evaporation system. The unit can automatically evaporate the condensate. There is no need to empty the water except in humid conditions. When you run the dry mode, then it is required to install the hose as the unit might pull more water from the air.

Other questions?
You can either refer to the user manual for more details or contact us at support@tosotdirect.com.

https://tosotdirect.myshopify.com
support@tosotdirect.com
**** +1 702-514-1603
www.tosotdirect.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals