Altos Computing BIOS Update Step for Linux and Non Windows OS Instructions
- June 3, 2024
- Altos Computing
Table of Contents
Altos Computing BIOS Update Step for Linux and Non-Windows OS
INSTALLATION INSTRUCTION
BIOS Update Step:
Notice: This bio is only for Linux/Non-Windows OS
- Download and extract ΗAltos P130_F5 System BIOS (Version R01-A4 L).zipΗ into your external USB Storage.
- Power on the system and enter BIOS Setup Menu.
- Go to the security — > Secure Boot page, disable the “Secure Boot”
- Go to the Advanced page, and enable “CSM Support”.
- Advanced -> PCH-FW Configuration -> Fireware Update Configuration -> Me FW Image Re-Flash [Enabled], ME State [disable]
- Select Boot >>> Boot Option #1 [UEFI: Built-in EFI…]
- Press [F4], then select [Yes] and press [Enter].
- Waiting for system boot to embedded UEFI shell.
- Check the USB drive location. Change the path to the USB drive number, FSx:
- Type allows. nsh or altos. is to start updating BIOS.
- After the BIOS update, check the “process completed” message.
- If any error, please check BIOS Setting to repeat steps 3 through step 11 again.
- Shut down the system and remove the power cord, wait for 30 seconds, then insert the power cord to power on the system. Check the system can power on normally.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>