JUPITER AVIONICS CORPORATION JA71-TR131 1.31 Inch High Tray Mount Blanking Plate Installation Guide
- June 4, 2024
- JUPITER AVIONICS CORPORATION
Table of Contents
JUPITER AVIONICS CORPORATION JA71-TR131 1.31 Inch High Tray Mount Blanking
Plate Installation Guide
Rev. A
Jupiter Avionics Corporation
1959 Kirschner Road
Kelowna BC
Canada V1Y 4N7
Tel: 778-478-2232
Toll-Free: 855-478-2232
www.jupiteravionics.com
Copyright 2022 Jupiter Avionics Corp.
All rights reserved
Jupiter Avionics Corporation (JAC) permits a single copy of this manual to be
printed or downloaded for the express use of an installing agency. Any such
electronic or printed copy of this manual must contain the complete text of
this copyright notice. Any unauthorized commercial distribution of this manual
is strictly prohibited. Except as described above, no part of this manual may
be reproduced, copied, transmitted, disseminated, downloaded, or stored in any
storage medium for any purpose without the express prior written consent of
JAC.
IMPORTANT:
Information in this document is subject to change without notice.
To confirm the current revision status of this manual, visit the JAC website:
www.jupiteravionics.com
SECTION 1 – DESCRIPTION
1.1 System Overview
The JA71-TR131 1.31 in High Tray Mount Blanking Plate (Radio Cover Plate)
allows the aircraft owner / operator to remove a piece of radio equipment from
the cockpit and fill the void with a compatible sized cover plate. The
blanking plate reduces the amount of debris and dust entering the equipment
rack. Matching the design and color to existing control heads presents the
customer with a professional look and feel to the instrument panel.
1.2 Features Overview
The JA71 is painted with a baked-on urethane finish to resist scratches and
nicks during use.
1.3 Specifications
1.3.1 Mechanical Specifications
2.1 Introduction
This section contains unpacking and inspection procedures and installation
information.
2.2 Continued Airworthiness
Maintenance of the JA71-TR131 is on condition only. Scheduled inspection
and/or periodic maintenance of this unit is not required.
2.3 Unpacking and Inspecting Equipment
Unpack the equipment carefully. Check for shipping damage and report any
problems to the relevant carrier. Confirm that the Authorized Release
Certificate or Certificate of Conformance is included. Complete the on-line
warranty card from the Jupiter Avionics Corporation (JAC) website –
www.jupiteravionics.com.
2.3.1 Warranty
All products manufactured by JAC are warranted to be free of defects in
workmanship or performance for 2 years from the date of installation by an
approved JAC dealer or agency. This warranty covers the cost of all materials
and labour to repair or replace the unit, but does not include the cost of
transporting the defective unit to and from JAC or its designated warranty
repair centre, or of removing and replacing the defective unit in the
aircraft. This warranty
does not cover failures due to abuse, misuse, accident, or unauthorized
alteration or repairs.
Contact JAC for return authorization, and for any questions regarding this warranty and how it applies to your unit(s). JAC is the final arbiter concerning warranty issues.
2.4 Installation Procedures
2.4.1 Mechanical Installation
The JA71-TR131 can be mounted in any attitude and location. Ensure all
fasteners are secured.
2.5 Installation Kit
N/A
2.6 Installation Drawings
The drawings and documents required for installation can be found in Appendix
A of this manual.
Appendix A – Installation Drawings
A1 Installation Drawings
CENTER OF GRAVITY
WEIGHT: 0.27 lbs [0.12 kg] MAX.
Read More About This Manual & Download PDF: