IDROP W01 Wireless Charging Mouse Pad User Manual
- June 3, 2024
- IDROP
Table of Contents
IDROP W01 Wireless Charging Mouse Pad
Product Description
- Wireless charging sensing area
- Netic input port
- Charging the phone horizontally
- Charging the phone vertically
Specifications
| Name | WIRELESS CHARGING MOUSE PAD |
|---|---|
| Model | W01 |
| Power out | 5W/7.5W/10W |
| Power IN | DC5V/2.1A 9V/1.67A |
| Size | 370 X 320 X 5MM |
| Charge conversion rate | 75% |
Instructions for use
Please use an adapter with output power of 10W or more, plug in the Charger
and fix the end of the power line with the magnetic suction head and the
magnetic suction input port of the bracket, the receiving position of the
mobile phone supporting wireless charging is then correspondingly placed on
the transmitting area of the wireless charger.
(Wireless reception is usually located in the middle of the phone)
Safety Instructions
During charging, if the phone runs APP or on using, the phone may heat up, it is normal situation.
- Please make sure there is no metallic material between the phone and charger and the phone case is non metallic kind.
- The wireless charger working temperature range is 0°C to 35 °C . it might get damaged if the temperature out the range.
- Please use the power adapter with 18W QC3,0 or quick charger 5V/2A or 9V/1.67A.
- Please do not let children or animal paly with the product or eat it.
- Please do not open or repair or refit the product.
- Please do not put any magnetic card (eg credit card, sim card, bank card etc.) near the charging phone, they might get damaged by the magnetic effects generated by charging.
- Please do not use the charger if it gets punctured or broken, Please do not put objects into the holes and do not put heavy objects on the product, do not squeeze the product badly, do not drag the cables
- Please use the charger with stable power supply.
Troubleshooting
Any problems please refer to below solutions. If problems still exit, please contact the dealer or the maintenance
- The charger not work.
- Check the Wireless Charger USB port is good. Check whether the magnetic port is in good contact, whether there is a foreign body.
- Check if use the proper adapter with 5V/2A or 9V/1.67A
- Check if the phone case contains metallic material
- The charging ceased or don’t reach 100% complete
- Please make sure the adapter is 18W Q3 quick charger, or standard 5V/2A 9V/1.67A.
- Please make sure the phone wireless receiver is right on the charging spot of the mat.
After-sales Ser vice
- Warranty year : 1 year (from the date of purchase)
- Charge free during warranty period if the problem caused by product quality.
- Replacement cost will be charged if the problem caused by human behavior or using wrong power.
- Any problem came up after the warranty 1 year you can always contact us only charge for replacements.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning : changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm
between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>