master Easy kvm-tec First Aid Installation Guide

: June 3, 2024
: master Easy

Table of Contents

master Easy kvm-tec First Aid Installation
Instructions
ACCESS TO MAIN MENU
DISPLAYING THE FIRMWARE VERSION
FEATURES
FRONTBRIDGING
BACKBRIDGING
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

master Easy kvm-tec First Aid Installation

Tune in the easy KVM World

Instructions

master-Easy-kvm-tec-First-Aid-Installation-
FIG-2

kvm-tec Supportkvm-tec Support
support@kvm-tec.com support@kvm- tec.com
Phone: +43 2253 8Phone: +43 2253 8191912 – 3012 – 30

We are here for you to answer your questions about installation?
Manual download www.kvm-tec.com or kvm-tec Installationchannel on our homepage personally +43 2253 81912

master-Easy-kvm-tec-First-Aid-Installation-FIG-5

Connect the CON / Remote and the CPU / Local Unit to the included 12V 1A power supply.
Now connect the USB cable to a USB port on your PC and connect the other end of the USB cable to the CPU / Local Unit. Connect keyboard and mouse to the CON / Remote Unit.
Connect the CPU / Local and the CON / Remote Unit with a network cable.
Now connect the DVI cable to the DVI socket of the PC and the other end to the DVI socket of the CPU / Local Unit (PC-in).
Then connect the monitor with the DVI cable to the CON / Remote Unit.
Opt: Connect PC audio/out with the audio cable to local audio/in. Connect audio/out via the audio cable
Almost done Opt: Connect the audio cable local audio/out to the PC audio/in and remote audio/out with audio cable to the microphone
If you are using a switch: Connect all endpoints to the switch. Ensure that all connections have a bandwith of 1Gbit/sec. For video sharing the network has to support IGMP snooping (Switch Layer3)

HAVE FUN – your kvm-tec Extender is now in use for many years (MTBF approx 10 years)

Use the monitor and the keyboard to access the main menu
Access to the main menu.

make sure the extenders, monitors, and computers are turned on.
Press the Scroll Lock button five times quickly. The main menu and an overview of the submenus are displayed.
To enter a submenu, press the corresponding key.

Main meu Short Cuts :

S Status Overview
U Update Flash FW
F Features Overview
D DDC Option
L Local Settings
R Remote Settings
A About Overview
Key „Esc“

Menu Status / current Status Firmware update

Settings Features
DDC Option Fix
Settings Local
Settings Remote
Exit

DISPLAYING THE FIRMWARE VERSION

Make sure that the main menu is open. Under „A“ – About the currently installed firmware version of the remote (CON) and local (CPU) extender is displayed.

FEATURES

Press the F key to enter the Features menu. Switching mode is set by default master-Easy-kvm-tec-First-Aid-Installation-FIG-7

FRONTBRIDGING

HARDWARE: 1 X DUAL LOCAL + 2 X SINGLE REMOTE
The „Status Menu“ displays the current status of the extender connection. The menu shows the information about the connection, the resolution of the video channel and the USB status. The link status shows if a connection is possible. Connected shows if the kvm fi les can currently be transferred. Video and USB show if data is currently being transferred master-Easy-kvm-tec-First-Aid-
Installation-FIG-8

BACKBRIDGING

HARDWARE : 1 X DUAL LOCAL + 2 X SINGLE REMOTE
The „Status Menu“ displays the current status of the extender connection. The menu shows the information about the connection, the resolution of the video channel and the USB status. The link status shows if a connection is possible. Connected shows if the kvm fi les can currently be transferred. Video and USB show if data is currently being transferred master-Easy-kvm-tec-First-Aid-
Installation-FIG-9