FIRST MATS Heavy Duty Warehouse Mats Instruction Manual
- June 3, 2024
- FIRST MATS
Table of Contents
FIRST MATS Heavy Duty Warehouse Mats
Equipment & Materials
- Clean Cloth
- Tape Measure
- Dust Pan & Brush
- Bucket & Mop
- Cleaning detergent
- 3M Surface Cleaner
- Scissors
Materials
- Forklift Truck Mats
- Double sided tape
Forklift Truck Mats
Preparation
For best results it is advised to install on a level and clean floor.
Simply follow these simple steps to achieve a durable, clean and adaptable
flooring finish in your chosen area
Degrease
Clean the existing floor to ensure that it is grease and oil free and that the
surface is clean and dry and free of dust and dirt.
Clean back of mat
Clean and degrease the back of the mat and ensure it is free of dust and dirt.
Double Sided Tape
Cut the tape into strips to fit the length of the matting. Peel off the
backing from the tape and apply to the matting as detailed on the drawing
below.
Application
Once the tape is applied to the back of the mat peel off the release paper.
With two people carefully turn the mat over and apply it to the floor.
For areas with more than one mat repeat the process.
Disclaimer
We recommend that you use 3M Surface Cleaner or one with a similar composition
when preparing the floor for installation. Please don’t use any aggressive
cleaning substances which contain alcohol, acetone or similar as this may
react with the rubber backing. Please don’t turn the forklift wheels or make
circular manoeuvres whilst moving over this mat. If in doubt, please contact
us:
Call: +44 (0)121 702 1659 or email
info@firstmats.co.uk
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>