Zhuo MS08 Bluetooth Self Shooter Owner’s Manual
- September 28, 2024
- Zhuo
Table of Contents
MS08 Bluetooth Self Shooter
“`html
Product Specifications
- Product Name: Bluetooth Selfie Camera
- Battery: CR2032
- Connectivity: Bluetooth
- Compatibility: IOS and Android systems
- Energy-saving features: Automatic hibernation mode
Product Usage Instructions
1. Installation and Power On
Open the back battery cover, insert the CR2032 battery, and
press the power key to turn on. The blue LED light will flash
indicating normal operation.
2. Bluetooth Pairing
Turn on your mobile phone’s Bluetooth, search for the Bluetooth
device, and select Connect Pairing. Upon successful connection, you
can start using the selfie camera.
3. Pairing with Another Mobile Phone
If you need to pair with another mobile phone, press and hold
the photo button for about 3 seconds. Untie the previous
connection, search for the device again, and pair it with the new
phone to start using the camera.
4. System Compatibility
The Bluetooth selfie camera is compatible with both IOS and
Android systems. No need to switch keys; simply connect and pair
with the desired mobile phone to use the camera.
FCC Warning
This device complies with FCC Rules. Please follow the
guidelines provided to ensure proper operation.
-
Reorient or relocate the receiving antenna if needed.
-
Increase separation between equipment and receiver.
-
Connect the equipment to a different circuit than the
receiver. -
Consult a professional for assistance if required.
The device meets general RF exposure requirements and can be
used in portable conditions without restriction.
Frequently Asked Questions
Q: How do I know if the Bluetooth selfie camera is in
hibernation mode?
A: The product will automatically enter hibernation mode when
disconnected, indicated by a lack of flashing LED lights. Simply
power it on again to resume usage.
Q: Can I use the camera with multiple mobile phones?
A: Yes, you can pair the camera with different mobile phones by
following the pairing instructions provided in the manual.
“`
Bluetooth self-shooter usage statement
1. Open the back battery cover of the Bluetooth selfie camera, install the
battery CR2032, and you can work. Press the power on key, and the blue light
LED will flash normally when used. When not in use, when disconnected, the
product will automatically enter hibernation mode, which is easy to use,
energy-saving and environmental protection.
Two. Turn on the Bluetooth of your mobile phone and search for the Bluetooth
device. After finding the Bluetooth selfie device, click Connect Pairing. If
the connection is successful, you can use it.
3. When you need to pair with another mobile phone, just press and hold the
photo button for about 3 seconds. First, let it follow a mobile phone to untie
it. Then search for Bluetooth device connection and pairing, turn on the
camera, and you can use it and take photos freely.
Four. IOS system and Android system do not need to switch keys. As long as you
connect and pair the corresponding mobile phone, you can use the Bluetooth
selfie camera to take photos.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>