COMELITGROUP WBW98 Wall Mounted Strobe with White LEDs Instruction Manual
- September 27, 2024
- COMELITGROUP
Table of Contents
COMELITGROUP WBW98 Wall Mounted Strobe with White LEDs
Specifications
- Model: WBW98, WBW99
- Material: ABS, PC lenses
- Color: Red
- Dimensions (H x W x L): WBW98 – 63 x 118 x 121 mm, WBW99 – 45 x 109 x 121 mm
- IP Rating: 65 for WBW98, 21 for WBW99
- Cable Entry: Rear/side entry
- Cable Section: 0.5 to 2.5 mm
- Operating Voltage: 9 Vdc to 60 Vdc
- Operating Current: 14.5 mA at low volume, high coverage, 0.5 Hz and 12.5 mA at low volume, low coverage, 0.5 Hz
Product Description
- The WBW98 is a wall-mounted flashing LED light for outdoor use, compliant with EN54-23 with synchronization. It features ABS construction with PC lenses in red color.
- The WBW99 is a wall-mounted flashing LED light for indoor use, compliant with EN54-23 with synchronization. It also features ABS construction with PC lenses in red color.
Installation Instructions
- Ensure the product is not damaged.
- Follow the DIP switch settings for LED frequency and power.
- Connect the cables as per standard connection (positive and negative).
- Mount the unit securely on the wall.
DIP Switch Settings
| DIP Switch | LED Frequency Setting | LED Power Setting |
|---|---|---|
| 7 | 0 (OFF) – 1 Hz, 1 (ON) – 0.5 Hz | 0 (OFF) – High Power, 1 (ON) – Low Power |
| 8 | 1 (ON) – EN54-23 Class W4-9, 0 (OFF) – EN54-23 Class W3-7 | N/A |
Warnings
Do not use alcohol or aggressive detergents for cleaning. Any repairs
should be carried out by qualified personnel.
FAQs
-
Q: Can I clean the product with alcohol?
A: No, do not use alcohol or aggressive detergents for cleaning. -
Q: What should I do if the product is damaged?
A: If the product is damaged, contact Comelit Group S.p.A. for repairs by qualified personnel.
Technical specifications
| |
---|---|---
Art.| | 0370-CPR-6934
WBW98| | EN 54-23:2010
| |
| |
Art.
WBW99
| | 0370-CPR-6935 EN 54-23:2010
| WBW98| WBW99
---|---|---
Description| Wall Mount VAD Beacon White LED Weatherproof| Wall Mount
VAD Beacon White LED Internal
Standards| EN54-23 with synchro Compliant| EN54-23 with synchro
Compliant
HARDWARE SPECIFICATION| |
Construction| ABS, PC lenses| ABS, PC lenses
Colour| Red| Red
Dimensions (mm) (H x W x L)| 63 x 118 x 121| 45 x 109 x 121
IP – Ingress Protection| 65| 21
Cable Entry| Rear/Side| Rear
Cable Size (mm)| 0.5 to 2.5| 0.5 to 2.5
ELECTRICAL SPECIFICATION| |
Operating Voltage| 9Vdc to 60Vdc (1)| 9Vdc to 60Vdc (1)
| 14.5mA (low volume, high coverage, 0.5Hz)| 14.5mA (low volume, high
coverage, 0.5Hz)
| 12,5mA (low volume, low coverage, 0.5Hz)| 12,5mA (low volume, low coverage,
0.5Hz)
Optical coverage and flash frequency| (See the respective table)|
(See the respective table)
ENVIRONMENTAL SPECIFICATION| |
Operating Temperature| -10°C to +55°C| -10°C to +55°C
Humidity (Non Condensing)| 0 to 95% RH| 0 to 95% RH
| | (1) Max inrush current is 5A
Standard connection| |
Standard connection
Installation
- Cable terminal block is clipped into the base
- Fix the base to the mounting surface
- Pull out cable terminal block from the base
- Cable entry is rear (internal version) or both rear and side (weatherproof version)
- Screw cables into the terminal block
- Insert terminal block into the main body
- Clip the main body to the base
- Tighten the set screw in the frontal hole
System functionality
DIP switch group function
LEDs frequency settings
| LEDs frequency | DIP switch: 7 | Frequency |
|---|---|---|
| HIGH | 0 (OFF) | 1Hz |
| LOW | 1 (ON) | 0.5Hz |
LEDs power settings
| LEDs power | DIP switch: 8 | En54-23 class |
|---|---|---|
| HIGH | 1 (ON) | W4-9 |
| LOW | 0 (OFF) | W3-7 |
Warnings
-
This Comelit product has been designed and manufactured for use in the creation of security systems in residential, commercial, industrial and public buildings.
-
All activities connected to the installation of Comelit products must be carried out by qualified technical personnel, with careful observation of the indications provided in the manuals / instruction sheets supplied with those products. The product must be installed to the highest standards.
-
Disconnect the power supply before carrying out any operations on the wiring.
-
Use wires with a cross-section suited to the distances involved, observing the instructions provided in the system manual.
-
We advise against running the system wires through the same duct as power cables (230V or higher).
-
To ensure Comelit products are used safely: carefully observe the indications provided in the manuals / instruction sheets; make sure the system created using Comelit products has not been tampered with / damaged.
-
Comelit products do not require maintenance aside from routine cleaning, which should be carried out in accordance with the indications provided in the Manuals / Instruction sheets. Any repairs must be carried out: for the products themselves, exclusively by Comelit Group S.p.A., for the systems, by qualified technical personnel. Do not use alcohol or aggressive products for cleaning purposes.
-
Comelit Group S.p.A. accepts no liability for any purpose other than the intended use, or failure to observe the indications and warnings contained in this manual / instruction sheet. Comelit Group S.p.A. reserves the right to change the information provided in this manual / instruction sheet at any time and without prior notice.
-
The manufacturer, Comelit Group S.p.A., hereby declares that this equipment conforms to the applicable directives. The full EU conformity declaration is available on the web page for the product.
-
In accordance with art. 26 of Italian Legislative Decree dated 14th March 2014, no. 49 “Implementation of directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE)”, the “crossed-out wheelie bin” symbol indicates that at the end of its useful life, this product must be separated from other waste before collection for disposal. The user should therefore take the exhausted appliance to suitable local collection centres for waste electrical and electronic products. As an alternative to handling this process yourself, you can take the appliance to your local equipment dealer when purchasing a new equivalent product. Electronics dealership businesses covering an area of 400 m² are also obliged to accept waste electronic products smaller than 25 cm for disposal, without any obligation to purchase. Suitable separated waste collection for the subsequent reuse of the appliance sent for recycling, processing and environmentally conscious disposal helps to avoid potential negative effects on the environment and human health, and encourages the reuse and recycling of the materials used in the construction of the appliance.
-
www.comelitgroup.com
Via Don Arrigoni, 5 – 24020 Rovetta (BG) – Italy -
1ª edizione 04/2024
cod. 2G40003264
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>