Weal HOME D19 Sleep Earbuds User Manual

Weal HOME D19 Sleep Earbuds

Product Information

Specifications:

• Product Name: WEALHOME D19 Sleep Earbuds
• Charging Case Indicator Lights: Green, Orange, Red
• Ear Tips Sizes: Large, Small

Product Usage Instructions

• Initial Setup:

1. Remove the earbuds from the case and peel off the insulation paper.
2. Place the earbuds back into the charging case.

• White Noise Mode:
  Press and hold the white noise button until the white light flashes. Open the case to auto-power on and enter pairing mode. White noise will start playing after about 5 seconds. If not connected within 30 seconds, follow the instructions to ensure proper connection.

• Power Management:

  • To Power On  Press and hold the main button for 3 seconds until the white light flashes.
  • To Power Off: Press and hold the main button for 5 seconds until the light flashes three times and turns off.
  • Play/Pause: Short press the main button.
  • Volume Control: Short press the Up or Down button accordingly.

• Charging:
  Monitor the charging case indicator lights to determine battery levels. Earbuds will auto-power on when removed from the case and power off when placed back in.

• Bluetooth Mode:
  Open the case to enable auto-power on and pairing mode. Connect with your device and await a beep for successful pairing. Control music playback on your device as there are no buttons on the earbuds for music control.

• Troubleshooting:

  • Auto Reconnect: Earbuds will reconnect to the last paired device. Turn off Bluetooth to switch to White Noise mode.
  • Reset: Press and hold the Pairing button while in the charging case until reset is complete.

• TWS Mode & Calling:
  Use left & right earbuds together for TWS mode. Earbuds support call function; use your mobile phone for calls.

• Earbud Battery:
  Battery display may vary based on smart device compatibility.

Frequently Asked Questions (FAQ)

• Q: How do I know when the earbuds are fully charged?
  A: The earbuds’ lights will turn off when fully charged. For the charging case, a green light indicates full charge.

• Q: Can I change the ear tips for a better fit?
  A: Yes, choose between large and small ear tips for a comfortable fit.

Product Overview

Packing Content

• Charging Case ×1
• WEALHOME D19 Buds ×1
• Ear Tips ×1
• USB-C Charging Cable ×1
• User Manual x 1

Note:
The earbuds perfect for sleep have no buttons even a touch button and need to be used with the charging case or mobile phone!

For the first use: Please take out the earbuds, tear off the insulation paper, and put them back in the charging case.

White Noise Mode

Press and hold the “white noise button” until the white light flashes. Open the case and take out the earbuds to auto-power on and enter pairing mode. The white noise will auto-play about 5 seconds later. (If they still unconnected for 30 seconds later, the earbuds may be connected to the mobile phone, please turn off the Bluetooth on the mobile phone, and wait for another 10 seconds to auto-connect and play white noise.)

• Power on: Press&hold “main button” for 3s until the white light flashes
• Power off: Press&hold “main button” for 5s,the white light flashes 3 times and turns off
• Play/Pause: short press the “main button”
• Volume up: short press “Up” button
• Volume down: short press “Down” button
• Next song: Press&hold “Up” button
• Previous song: Press&hold “Down” button
• Single song loop or Sequential play: Twice press the “main button” to switch, the default is single song loop play.

Note:
When earbuds power off ( 0% battery or put back in charging case), the charging case will auto-power off 5 minutes later.

Wearing & Replacing the ear tips

Choose the ear tips that fit your ears best.TheearbudscomewiththeLsizesofeartips

Charging

Charging case charging:

1. 100% — green light on

2. 80% — green light flashes

3. 20%-80% — orange light flashes
4. 10%-20% — red light flashes

Charging case battery display:
When putting the earbuds into the charging case different lights show different batteries:

1. <10% — red light flashes
2. 10%-20% — red light display 3 seconds
3. 20%-80% — orange light display 3 seconds

4. 80% — green light display 3 seconds

Earbuds

• Charging: Earbuds lights on
• Fully charging: Earbuds lights off
• Power on: auto-power on when remove it from the case, you can hear“ power on”
• Power off : auto-power off when put it back to charging case

Bluetooth Mode

• Open the case and take out the earbuds to auto-power on and enter pairing mode.
• Open the Bluetooth on your smart device, and connect with the “WELCOME D19” After successful pairing you can hear a beep” Do”

Note:
Earbuds have no button to control the music, please operate(play/pause/next song…) on your smart device.

Auto reconnect

1. Take us the earbuds will auto connect back to the last successfully connected smart device. (So if you need to switch to the white noise mode need to turn the Bluetooth on your smart device）
2. When the earbuds and smart device are disconnected beyond the effective distance, they will be auto-reconnected when they return to the effective distance within 3mins

Reset

1. Put the earbuds back into the charging case, Press & hold the “Paring button” until the green light flashes and the earphone lights on means reset is complete.
2. Take out the earbuds, auto power on, and enter pairing, when the beep“Do” means pairing is successful.

TWS Mode

Auto TWS mode when using left & right earbuds together. If un-pairing, reset the earbuds will auto repair to the TWS mode.

Incoming call mode

This earbuds support call function, please use your mobile phone to make and receive calls.

Earbud battery

1. When paired with a smart device, if your smart device supports the power display, the earbuds battery will display also, it’s up to your smart device.
2. It will auto-power off with no sounds when the battery is low

FAQs

Why is there no sound?

1. Please make sure the power is on, or you can try re-powering on.
2. Please try to put the earbuds back in the charging case for a while, then take them out and re-power them.
3. Check if the earbuds the enough battery.

Why no white noise?

1. If you connect with one smart device, the earbuds will auto-connect with the smart device and enter Bluetooth mode, if wanna to the white noise, please make sure the Bluetooth turns off on the paired smart device.
2. If Bluetooth turns off still no white noise, you can try re-power on
3. If still not working, reset and re-power on.

Maintenance

1. Do not wear the product in the shower/rain or soak it in water.
2. Do not use the product in extreme environments such as abnormal temperatures.
3. After each normal use, please keep the earbuds dry.

Note:
This method can effectively extend the life of the product and greatly avoid the emergence of faults.

Warranty

12 months from the date of receipt.

Specifications

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution:
Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

RF Exposure Information
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>