Crystal Vision CVT Series 3MP IP Camera Owner’s Manual

: September 25, 2024
: Crystal Vision

Table of Contents

CVT Series 3MP IP Camera
Product Specifications:
CVT-30WB
CVT-35WB / CVT23PWBU / CVT-27WIPT / CVT-37WPT
- Product Usage Instructions:
1. General Description
2. Add Camera
3. Image Setting (For Specific Models)
4. Panic Siren Button (For Specific Models)
5. Two-Way Communication & Sound Recording (For Specific
- Frequently Asked Questions (FAQ):
Q: How do I reset the camera if it is not found during
Q: What is the purpose of the Panic Siren Button on the menu
Q: How can I enable two-way communication and sound recording
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

CVT Series 3MP IP Camera

“`html

Product Specifications:

CVT-30WB

Image Sensor: 3MP 1/3 CMOS
Shutter: Adaptive Shutter
Lens: 4mm F2.0 ICR Infraed
Night View: H.265/H.264
Video Compression: 2304×1296@15fps, 640×480@15fps
WiFi Band: 2.4G IEEE802.11b,g,n
Wireless Standard: -20°C to 50°C
Operating Temp: 95% Humidity
Power Supply: DC12V1A
Protection Level: IP66

CVT-35WB / CVT23PWBU / CVT-27WIPT / CVT-37WPT

Image Sensor: 3MP 1/3 CMOS
Shutter: Adaptive Shutter
Lens: [Specific lens info not provided]
Night View: [Specific night view info not provided]
Video Compression: [Specific compression info not
provided]
Field of View: [Specific field of view info not provided]
Min. Illumination: [Specific illumination info not
provided]
WiFi Band: [Specific WiFi band info not provided]
Audio: [Specific audio info not provided]
Operating Temp: [Specific operating temp info not
provided]
Power Supply: [Specific power supply info not provided]
Protection Level: [Specific protection level info not
provided]

Product Usage Instructions:

1. General Description

Camera setup and connection guide:

Connect the camera and power adapter.
Secure all connections tightly and use electrical tape for
added security.
Use extension power cables if necessary, ensuring up to four
can be connected.

2. Add Camera

Adding a new camera to the system:

Place the camera near the NVR and power it up.
Confirm sync mode by checking the status light on the
camera.
In the menu bar, click the button to search for new
cameras.
If not found, reset the camera by holding the Reset Button for
about 10 seconds.
Wait for automatic detection and check live view for proper
connection.

3. Image Setting (For Specific Models)

Smart night vision mode for specific cameras:

This mode enables automatic activation of floodlight upon motion
detection.

4. Panic Siren Button (For Specific Models)

Emergency siren feature on specific cameras:

Allows for loud siren activation in case of emergency or
intrusion.

5. Two-Way Communication & Sound Recording (For Specific

Models)

Enabling two-way communication and sound recording:

Select channel for audio recording in the menu bar.
Enable sound recording and save changes.

Frequently Asked Questions (FAQ):

Q: How do I reset the camera if it is not found during

setup?

A: Press and hold the Reset Button on the camera for about 10
seconds to reset it.

bar?

A: The Panic Siren Button activates a loud siren on all
connected cameras simultaneously in case of an emergency or
intrusion.

Q: How can I enable two-way communication and sound recording

on specific models?

A: Navigate to the Menu Bar, click on Camera, select the desired
channel for audio recording, enable Sound Record, and save
changes.

“`

3MP IP Camera
Support Model : CVT-30WB (Bullet) CVT-35WB (Floodlight Bullet) CVT23PWBU (Outdoor Pan-tilt) CVT-27WIPT (Indoor Pan-tilt) CVT-37WPT (Outdoor Pan-tilt)

1. General Description
1. Camera comes with two major parts; the camera and the power adapter. 2. Please note that the camera cable has two ends: one for the power cable and the
other has the Reset button inside. 3. Please make sure all the connections are tight as possible and it is recommended
that you secure the connection with electrical tape as you see it. 4. Use the included extension power cable(15ft) if necessary.
You may connect up to four 15 ft extension cables(60 ft).
NOTE: Please try to protect your power source from moisture and other foreign elements.
2. Add Camera
TIP: If you are replacing a camera, please delete the camera from the connected camera table first, to make room for a new camera.
1. First set the camera next to the NVR and power up the camera. 2. Check the status light on camera to confirm that it is in “sync” mode, indicated
by rapid blinking. 3. Click button on the menu bar. 4. Click the “continue” button to start searching for new cameras.
TIP: * If the system does not find the camera, please press and hold the Reset Button on the camera for about 10 seconds to reset the camera.
5. Wait for the NVR to automatically search for cameras for 30 to 40 seconds. your camera should appear in an empty channel in the table. 6. Click the “continue” button to proceed. Check the live view for the newly-added camera to confirm that it is connecting properly

3.Image Setting (For CVT-35WB, CVT23PWBU, CVT-37WPT Cameras Only)
Smart night vision mode allows the camera to detect motion and automatically turn on a bright floodlight when it detects any movement in its range of view.
Image Setting mode

4.Panic Siren Button
(For CVT-35WB, CVT23PWBU, CVT-27WIPT, CVT-37WPT Only)
panic siren button function on a surveillance camera is a feature that allows the camera to emit a loud and attention-grabbing siren in case of an emergency or intrusion.

Panic Siren Button on each camera

Panic Siren Button on Menu Bar

The Panic Siren Button for all connected cameras is a feature that allows the user to activate a loud siren on all cameras simultaneously by pressing a button on the menu Bar.
5.Two-Way Communication
(CVT-35WB, CVT23PWBU, CVT-27WIPT, CVT-37WPT Only)
1.To use the two-way communication function through the Eseecloud app, you need to first connect your system to the app on your smartphone. Once your system is connected, you can select the specific camera you would like to use to speak. 2. Simply press and hold the talk button in the app while speaking. Once you release the button, you can hear what the person in the scene is saying through the speaker on your phone 3. Once the conversation is over, click the Hang up button to end the communication.
6. Sound Recording
(CVT-35WB, CVT23PWBU, CVT-27WIPT, CVT-37WPT only)
1. Click on Menu Bar> click Camera > Select channel you want to record audio sound > Click Keep Recording > enable Sound Record 2. Click Save changes

CVT-30WB
Specification

Image Sensor: shutter: Lens:
Night View: Video Compression:
Main Stream: Sub Stream: WiFi Band:
Wireless Standard: Operating Temp: Powe supply: Protection Level:

3MP 1/3 CMOS Adaptive Shutter 4mm F2.0 ICR Infraed H.265/H.264 2304×1296@15fps 640×480@15fps 2.4G IEEE802.11b,g,n -20 ~50 95% Humidity DC12V1A IP66

CVT-35WB / CVT23PWBU CVT-27WIPT / CVT-37WPT
Specification

Image Sensor: shutter: Lens:
Night View: Video Compression:
Field of View: Min. Illumination:
WiFi Band: Audio:
Operating Temp: Powe supply:
Protection Level:

3MP 1/3 CMOS

Smart Siren: 100 Decibel

Adaptive Shutter

Recording: Continous,

4mm F2.0

Motion-triggered Recording

ICR Infraed up to 70ft H.265/H.264

Night View: Smart, Full Color Night View Other Alerts: Push notification to the APP

70°

Main Stream: 2304×1296@15fps

Color: 0.1Lux, BW: 0.01Lux

Sub Stream: 640×480@15fps