LEFEET P1/ P1 XR Underwater Scooter User Manual

LEFEET P1/ P1 XR Underwater Scooter

More information can be obtained online

PAIRING THE REMOTE CONTROL WITH THE MAIN UNIT

When pairing is required:

1. Slide down the (power/shifting) button on the remote control and hold for 5 seconds until the white indicator light flashes, indicating the remote control enters pairing mode.
2. Position the top center of the remote control towards the left triangle icon on the main unit’s display screen, and hold for 5 seconds until the display screen enters pairing mode.
3. The remote control will automatically pair with the main unit. When the main unit’s display screen returns to the standby interface, it indicates pairing is completed. At this point, you can either slide the (power/shifting) button on the remote control or press the trigger to exit pairing mode. Pairing is completed.

One remote control can pair and operate up to 10 P1 Main units.

INSTALL THE BRACKET

1. Thread the remote control through the fixed hole on the bracket, cover it with the screw cap, rotate it clockwise, and tighten the remote control securely with slight force.
2. Thread the handle through the fixed hole on the bracket, cover it with the screw cap, rotate clockwise, and tighten the handle securely with slight force.
3. Align the positioning pin on the back of the bracket with the notch on the fixed base of the main unit bracket, then slide downwards.
4. Once aligned, hand tighten the screw clockwise.

WHAT’S IN THE BOX

1. Type C cable
2. Handle screw cap
3. Handle
4. Remote control
5. Battery
6. Main unit
7. Sport camera mount
8. Screw Bolt
9. Charging converter
10. Handle bracket
11. Anti-Lost Strap
12. GaN Charger 100W
13. Remote control Magnetic charging cable

PRODUCT DIAGRAM

CHARGING THE MAIN UNIT BATTERY AND EXTERNAL POWER SUPPLY

1. Rotate the battery ring counterclockwise following the direction of the hollow arrow to remove the battery. (Please ensure the battery is turned off before performing this operation.)
2. Attach the charging adapter to the battery plug end.
3. Use a USB-C charging cable to connect the charging adapter to a USB-C charger for charging. Make sure to use a charger and charging cable rated at 100W or above to ensure optimal charging speed.

Battery external charging
When the battery switch is turned on and connected to devices such as smartphones via the charging adapter, it can charge external devices.

Note: If the battery switch is turned off, and the connected device has external charging functionality, the battery will be charged.

While charging, the battery indicator light will flash.

Battery level indication:

1. Light: Below 25%
2. Lights: 25-50%
3. Lights: 50-75%
4. Lights: Above 75% Once fully charged, all indicator lights will be solid.

INSTALL THE BATTERY

1. Aim the battery downward at the battery interface of the host. Please judge the correct direction through the gap.
2. Rotate the battery ring clockwise in the direction of the solid arrow to lock the battery. Rotate until there is no gap between the battery and the main unit. (If the resistance of the waterproof ring is too large, press the battery downward slightly and rotate the battery ring.)

POWERING ON THE MAIN UNIT

1. Rotate 90° in the direction of “on” to power on the main unit.
2. Once you hear the startup sound, the screen will light up.

REMOTE CONTROL

Slide down the (power/shifting) button on the remote control and hold for 3 seconds to power on the remote control. The indicator light will illuminate.

Remote control battery level indication:

• Green: 60%-100%
• Yellow: 20%-60%
• Red: Less than 20%

SPECIFICATIONS

• As the battery is consumed, the power will gradually weaken, and automatic speed reduction and speed level jumping may occur, or the high-speed level may not be available for use. This situation is considered normal.
• This data is for reference only. The actual duration of use will vary depending on different speed level,User weight, Usage environment, etc.

CHARGING THE REMOTE CONTROL

THE REMOTE CONTROL CONTROLS THE MAIN UNIT

1. With the main unit powered on, slide the (power/shift) button on the remote control down and quickly release it to switch speed gears. Each slide increases the gear by one level.
2. Pull the trigger, and the thruster starts. Release the trigger, the thruster stops.
   • The P1 with a 100Wh battery has 4-speed gears, while the P1 XR with a 160Wh battery has 5-speed gears.
   • Low battery warning: When the battery level is below 20%, you will not be able to use speed gears 2 and above.

SAFETY WARNINGS
LEFEET P1/ P1 XR is designed with user safety as the top priority. However, Like any electronic sports product, using P1/P1 XR also carries certain risks (such as losing control). Therefore, it is very important to read and follow all instructions and warnings in the user manual and make good judgments when using it. We consider the use of LEFEET P1/ P1 XR products as the user’s acknowledgment and acceptance of all related risks and responsibilities that may arise during use. Including but not limited to muscle injuries, fractures, tears, or other serious injuries. The use of LEFEET P1/ P1 XR is at your own risk. We are not responsible for accidents caused by a lack of common sense. Children under 14 years old can only use it under the supervision of parents or other adults For better safety, please read and follow all instructions and warnings in the user manual.

WARRANTY SERVICE
Main Unit LEFEET guarantees that the LEFEET P1/ P1 XR products you purchase are designed and manufactured according to the qualified standards. Under normal use, there is no functional defect during the warranty period. Lf you have any problem in the process of using it, we recommend that you first check the user manual, furthermore, you can also download the user manual, FAQ, instructional video, or support forum on our website.

SCOPE OF SERVICES
Your LEFEET P1/ P1 XR includes a one-year limited hardware warranty which starts from the date of the sales invoice, the warranty period for the main body is 12 months while the warranty period for the battery is 6 months. Lf you cannot provide an invoice or other valid proof of purchase, then the warranty period will start from 90 days after the production date that shows on the product, or otherwise specified by LEFEET. Lf repairs are not feasible or commercially unfeasible, we may replace this product with new or refurbished products with similar features. After repair, firmware upgrade, and replacement, the replaced product or accessory will be covered by the same warranty during the remaining warranty period of the original product.

HOW TO OBTAIN AFTER-SALES SERVICES
lf a product does not function as warranted during the warranty period, please contact us through service@lefeet.com to obtain after-sales service. LEFEET may not offer after-sales service in certain areas, the policy of after-sales service varies from different places. Additional charges may be required for services outside the regular service scope. Please contact us for information specific to your location.

WHAT TO DO BEFORE OBTAINING AFTER-SALES SERVICES
Please specify the problems with the product after contacting LEFEET. LEFEET technicians will attempt to diagnose and resolve your problem by phone, email, or remote assistance. Lf your problem cannot be resolved over the telephone, you may be required to deliver the product to LEFEET for further examination. LEFEET will arrange for repair or replacement service under this Limited Warrant Service.

PRODUCT AND PART REPLACEMENT
When after-sales service involves the replacement of a product or part, the replaced product or part becomes LEFEET’s property, and the replacement product or part becomes your property. Only unaltered LEFEET products and parts are eligible for replacement. Replacement products or parts provided by LEFEET may not be new, but they will be in good working order and at least functionally equivalent to the original product or part’s capabilities. A replacement product or part shall be covered for the time remaining in the original product’s warranty.

USE OF PERSONAL CONTACT INFORMATION
lf you obtain service under this policy, you authorize LEFEET to store, use, and process your contact information, including name, phone number, address, and e-mail address. You agree and understand that LEFEET must collect, process, and use your information to perform service under this policy. We may contact you to inquire about your satisfaction with our service or to notify you about any product recalls or safety issues. To achieve these aims. You authorize LEFEET to transfer your information to any country where we do business and to provide it to entities acting on our behalf. We may also disclose your information where required by law.

WHAT THIS AFTER-SALES POLICY DOES NOT COVER.

• Collision or burning down accidents caused by man-made and non-product quality problems.
• Damage caused by unauthorized modification and dismantling of the shell under the guidance of the unofficial instruction manual.
• Damage caused by improper installation, use, and operation not according to the user manual.
• The customer repairs the parts by himself or asks an unauthorized service organization to repair/modify the parts without official instructions.
• Damage caused by improper circuit modification guided by unofficial user manual and mismatch or misuse of the battery and charger.
• Damage caused by misuse of the product or handling of the product under environmental conditions not in accordance with the user manual.
• Damage due to peripherals, add-on devices, or accessories other than those recommended in the user manual.
• Damage is caused by insufficient discharge when the battery is low or when using a battery with quality problems.
• The device has been damaged, including but not limited to damage caused by animals, lightning, abnormal voltage, fire, natural disasters and transportation.
• Products or parts with an altered identification label or from which the type number, serial number, or production date has been removed or unrecognizable.
• The product cannot work properly because it is not used in the country/ area where it was originally designed and manufactured or approved for use.
• For third-party applications that you use on the product.

LIMITATION OF LIABILITY
LEFEET only takes charge of the loss or damage under the following circumstances: Your product is owned by LEFEET or it is in LEFEET’s transportation. Under no circumstance, and notwithstanding the failure of the essential purpose of any remedy set forth herein, shall LEFEET, its affiliates, suppliers, dealers, or service providers be liable for any of the following even if informed of their possibility and regardless of whether the claim is based in contract, warranty, negligence, strict liability or other theory of liability: 1. third party claims against you for damages; 2. Special, incidental, punitive, indirect, or consequential damages, including but not limited to lost profits, business revenue, goodwill, or anticipated savings. In no case shall the total liability of LEFEET, its affiliates, suppliers, dealers, or service providers for damages from any cause exceed the amount of actual direct damages, not to exceed the amount paid for the product.

Federal Communications Commission (FCC) Interference Statement

This equipment has been tested and found to comply with the limits for a Class A digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

RF exposure compliance
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

CE Statement:

SAFETY WARNINGS

1. Restrictions “There are no restrictions of use”

2. Frequency band(s) in which the radio equipment operates Maximum radio-frequency power transmitted in the frequency band(s) in which the radio equipment operates.

3. EU Declaration of Conformity The device complies with essential requirements and other relevant provisions of the Radio Equipment Directive 2014/53/EU. The full text of the EU Declaration of conformity is available at the following internet address: www.lefeet.com

4. Manufacturer & Local Representative name, address EU Regulatory Contact: SUCCESS COURIER SL.
   Address: CALLE RIO TORMES NUM. 1, PLANTA 1, DERECHA, OFICINA 3,Fuenlabrada, Madrid,28947 Spain, successservice2@hotmail.com

5. RF Exposure Information
   This equipment complies with EU & UKCA radiation exposure limits set forth for an uncontrolled environment.

UKCA Statement: UK Declaration of Conformity

National Restrictions

• Attention: This device may only be used indoors in Great Britain. Frequency band(s) in which the radio equipment operates Maximum radio-frequency power transmitted in the frequency band(s) in which the radio equipment operates.

UKCA Declaration of Conformity
The device is in compliance with essential requirements and other relevant provisions of the Radio Equipment Regulations 2017. The full text of the UKCA declaration of conformity is available at the following internet address: www.lefeet.com Manufacturer & Local Representative name, address UKCA Regulatory Contact: GOAL REACH CONSULTING LTD.

Address: OFFICE 1029 3 HARDMAN STREET 1OTH FLOOR, SPINNINGFIELDS MANCHESTER, UK M3 3HF, goalservice@hotmail.com

RF Exposure Information
This equipment complies with UKCA radiation exposure limits set forth for an uncontrolled environment. Moving fan blade Keep body parts away from fan blades. Please cut off the power when repairing or cleaning the propeller.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>