hama 00176639 Remote Control WiFi Smart Infrared Remote Control Instruction Manual

: September 24, 2024
: Hama

Table of Contents

Introduction
Packaging contents
Safety instructions
Getting started
Integratio n into the Hama Smart Home app
Adding a device to the smart IR remote
Configuration
Technical data
Care and maintenance
Specifications according to Regulation (EU) 2023/826
Documents / Resources

hama 00176639 Remote Control WiFi Smart Infrared Remote Control Instruction Manual

Introduction

Thank you for choosing a Hama product.
Take your time and read the following instructions and information completely.
Please keep these operating instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.

Explanation of warning symbols and notes

Risk of electric shock
This symbol indicates a risk of electric shock from touching uninsulated product parts that may carry hazardous voltage.

Warning
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.

Note
This symbol is used to indicate additional information or important notes.

Packaging contents

1x Smart IR remote
1 x USB power supply unit
1x USB-C cable
1x quick guide
1x warning and safety instructions

Safety instructions

Risk of electric shock

Do not open the device or continue to operate it if it becomes damaged.
Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
Do not use the product if the AC adapter, adapter cable or power cable is damaged.
The product is intended for private, non-commercial use only.
Use the product only for the intended purpose.
The product is intended only for use inside buildings.
Only use the article under moderate climatic conditions.
As with all electrical products, this device should be kept out of the reach of children.
Do not operate the product outside the power limits given in the specifications.
Do not use the product in areas in which electronic products are not permitted.
Do not drop the product and do not expose it to any major shocks.
Do not modify the product in any way. Doing so voids the warranty.
Dispose of packaging material immediately in accordance with the locally applicable regulations.
Do not use the product in a damp environment and avoid splashing water.
The product must only be operated on a supply network as described on the type plate.
Not suitable for operation with dimmers, electrical switches, photo cells, time switches or twilight switches.
Whenever changing a light, always ensure that the light or fitting in question is voltage-free. Switch it off and/or pull the mains plug.
Do not bend or crush the cable.
Only operate the product from a socket that has been approved for the device. The socket must be installed close to the product and must be easily accessible.
Always pull directly on the plug when disconnecting the cable, never on the cable itself.
Do not use the product if the adapter, connection cable or power cable is damaged.

Getting started

Switch on

Connect the enclosed USB-C cable to the USB socket and the USB power supply unit.
Connect the power supply unit to a properly installed and easily accessible mains socket.
The LED start to flash.

Installing the Hama Smart Home app

To use all the functions of the device, you need a smartphone/tablet and the Hama Smart Home app.

Note

The following operating systems are supported:
iOS 16.3 or later
Android 6.0 or later
Download the Hama Smart Home app from the App Store (iOS) or from Google Play (Android) to your smartphone/tablet.
To install the app, follow the instructions on your smartphone/tablet.
Open the app on your smartphone/tablet.

Note

While setting up the app, you will be asked whether the app has permission to access the functions of your smartphone/tablet. Say yes to these prompts for the full functionality of the device.
Register to create a new account. Alternatively, log in with the access data of your existing account.
Follow the instructions for setting up the app until you can add a new device, see Chapter 5.
Integration into the Hama Smart Home app.

https://link.hama.com/ app/smart-home

Note
A detailed description of the Hama Smart Home app and all of its functions can be found in our app guide at:
support.hama.com/00176639

Note
Ensure that you are using the latest version of the Hama Smart Home app.

Integratio n into the Hama Smart Home app

Press and hold the On/Off button for 5 seconds until the LED flashes blue.

Open the app and select “My home” at the bottom left-hand edge of the screen.
Then tap the “+” at the top right-hand edge of the screen and select the category “Remote Control”.
Confirm in the app that the smart IR remote unit is flashing.
Now enter the name of your WiFi network and the password.

Confirm your entry with “OK”. The smart IR remote unit is now connected

Adding a device to the smart IR remote

Click on “Add device”
Select the device whose remote control you want to add

Teaching devices (two types)

You can now choose between two types of device teaching.

Quick add:
When adding quickly, the buttons are preset and 3 buttons are taught.

Manual add:
When adding manually, teach each button on the remote control individually.

Quick add

Click on “Quick add”
Select the manufacturer of your device
You are now instructed to teach the On/Off button.
Point your remote control at the smart IR remote control and press the On/Off button on your remote control.
Once you have pressed the button, press the button displayed in the app and check whether you can now control your device with your mobile phone.
If you can control the device, click on “Works”. -> Two further buttons are suggested.
If you cannot control the device, click on “Does not work” and learn another button.
The remote control is then displayed in the app. Now try to control three more buttons and click on “Works” or “Does not work” again
Once you have tested the buttons, your remote control is connected and you can now control your device via the app.

6.1.2 Manual add

Click on “Add device”
Select the manufacturer of your device
Hold your remote control at a distance of 3 cm from the smart IR remote control.
You can now program the remote control button by button.
In the app, select the button you want to teach and press and hold the button briefly.
A rotating circle now appears on the selected button. Now press the same button on the remote control that you want to teach.
Once the button has been successfully programmed, a tick appears in the app.

If you want to program another button, press “Next” and repeat steps 4-6.

When you have taught all the buttons you want to teach, press “Done”.
You can then save your device.

Configuration

Control via voice assistants

The following voice commands are supported:

Switch on / off
“Alexa / OK Google, switch the TV on.”
Control volume
“Alexa/OK Google, turn down the TV”

Extended usage options with scenarios
Scenarios and automated sequences that can be created in the app allow various combination options and usage options for these products, depending on the Smart Home products in your home.
Programming is always via the app (see Section 4 of the App Guide) and will be offered / suggested to you on an individual basis.

Standard usage option

Technical data

Specifications according to Regulation (EU) 2019/1782

Care and maintenance

Note
Disconnect the device from the mains before cleaning and during prolonged periods of non-use.

Only clean this product using a lint-free, slightly damp cloth and do not use any harsh cleaners.

Warranty disclaimer
Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the use instructions and/or safety notes.

Declaration of conformity
Hama GmbH & Co KG hereby declares that the radio equipment type [00176639] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following Internet address:
https://support.hama.com/00176639

To limit exposure to electromagnetic fields
This device is intended for use at a distance of at least 20 cm from the body of the user or persons nearby. This device must not be worn or carried on the body.

Specifications according to Regulation (EU) 2023/826

Information regarding energy consumption can be found at:
https://support.hama.com/00176639

Hama GmbH & Co KG
86652 Monheim/Germany

Service & Support

support.hama.com/00176639
+49 9091 502-0

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Hama GmbH & Co. KG is under license. Other trademarks and trade names are those of their respective owners.

All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied.

Documents / Resources

| hama 00176639 Remote Control WiFi Smart Infrared Remote Control [pdf] Instruction Manual
00176639 Remote Control WiFi Smart Infrared Remote Control, 00176639, Remote Control WiFi Smart Infrared Remote Control, Control WiFi Smart Infrared Remote Control, Smart Infrared Remote Control, Infrared Remote Control, Remote Control
---|---