RUGGED RADIO MT-RM-TOY Mobile Radio Mount Instruction Manual
- September 23, 2024
- rugged radio
Table of Contents
RUGGED RADIO MT-RM-TOY Mobile Radio Mount
Product Information
Specifications:
- Product: Toyota Mobile Radio Mount
- Compatibility: Tacoma, 4Runner, & Sequoia
- Model: MT-RM-TOY
- Version: V1.0 – 09/2024
Product Usage Instructions
Assembling the Mount and Radio:
- Gather the required equipment: Crescent Wrench.
- Step 1: Install the Radio Mount to the center console.
Installation Complete:
- Congratulations! Your mobile radio is now securely mounted to the center console of your vehicle.
- If you encounter any issues or have further questions, please feel free to contact our support team for assistance.
FAQ
-
Q: How do I adjust the angle of the mounted radio?
A: To adjust the angle of the mounted radio, simply loosen the mounting screws slightly, reposition the radio as desired, and then tighten the screws securely. -
Q: Can this mount accommodate radios of different sizes?
A: Yes, the Toyota Mobile Radio Mount is designed to be adjustable to fit various sizes of mobile radios within the specified vehicle models.
TOYOTA
MOBILE RADIO MOUNT
Mounting the mobile radio to the center console in Tacoma, 4Runner, & Sequoia
INSTALLATION INSTRUCTIONS
Assembling the Mount and Radio
Equipment Used
- 7mm Socket Wrench or Phillips Screwdriver 10mm Socket Wrench or Open End Wrench
- 2mm Socket Wrench
- 14mm Socket Wrench
- 1/8″ Allen Wrench
- 3/8″ Socket Wrench or Open End Wrench Small Crescent Wrench
Step 1: Install Radio Mount
- Radio Mount: Locate the U-bracket packaged with your radio and attach it to the radio mount using the included mounting bolts and nuts. Use a 1/8″ Allen Wrench and 3/8″ Socket Wrench or Open End Wrench.
- Remove the factory front left seat bolt from the passenger side seat using a 14mm Socket Wrench; this will be the closest bolt to the center console. SEE FIGURE A. Line up the bottom hole of the radio mount to the hole on the seat mount.
- Reinstall the factory seat bolt back into its original location, securing both the seat and radio mount.
- IMPORTANT: Ensure the radio mount is rotated so the rubber bumper makes contact with the center console before tighten-ing down the seat bolt.
- Radio: Position the radio, then insert and tighten the supplied hex/Phillips screws into the side of the radio using a 7mm Socket Wrench or Phillips Screwdriver.
Installation Complete
- If you have any other questions, our team is ready to help give us a call.
- RUGGEDRADIOS.COM
- 1 888-541-7223
- Ask For Tech Support
- CALIFORNIA PROP 65 WARNING: Cancer and Reproductive Harm www.p65warnings.ca.gov
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>