KRAUSE ADM-UN-HB-33 Sandoval Open Road Bar and Riser Kit Instructions
- September 23, 2024
- KRAUSE
Table of Contents
**KRAUSE ADM-UN-HB-33 Sandoval Open Road Bar and Riser Kit Instructions
**
Assembly Instruction
NOTE: Bar end and knuckles have been pre-installed.
Separating these components is discouraged.
- Start by running the wires through the bar.
*De-pinning connectors and removing black OEM sheath are highly encouraged . - With controls installed, wires can be ran through the lower bar while simultaneously installing lower bar into the knuckle.
- Tighten the 3 screws of knuckle lightly to keep knuckle from easily turning with remainder of installation.
- With bars installed onto clamps, final positioning can be adjusted and tightened to spec (See attached torque specs)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>