Tenchown TC-C-W Wireless Charging Owner’s Manual
- September 23, 2024
- Tenchown
Table of Contents
Tenchown TC-C-W Wireless Charging
| Plans/dates | Approval / Date | Review / Date |
|---|
Wang Yong /
01.08.2024
| |
Specifications
- Model Number: TC-C-W(02)
- Product Color: Wood grain color, black, red (customizable)
- Main Material: ABS, PC board
- Scope of Use: Mainly used for multifunctional sofa
- Environmental Conditions: Indoor use
working temperature| 0℃~50℃| Storage temperature| -10℃~60℃
---|---|---|---
Working humidity| 20%~90%| Storage humidity| 30%~80%
Detection temperature| 20℃±10℃| atmospheric pressure| 65~105MPa - Working Temperature: -10°C to 60°C
- Working Humidity: 30% to 80%
- Storage Temperature: 65°C to 105°C
- Storage Humidity: Atmospheric pressure 65 to 105MPa
Basic dimensional characteristics
Performance Characteristics
- AC Voltage Input: 125V
- Wireless Charging Output Power: 15W
- Wireless Charging Support:
- 5W standard charging
- 7.5W fast charging
- 10W fast charging
- 15W fast charging
- Motor Line DC Output: 29V/2A
Advantages
Safe, easy to assemble, silent, beautiful, easy to install, and flexible.
Packaging/Transportation/Storage
- Packaging method: plastic bag packaging, paper box packaging
- Transportation: Handle with care, do not get wet, and use logistics for transportation, making it convenient, fast, and safe.
- Storage: Clean environment, dry and ventilated, avoid contact with corrosive characteristics, and keep away from fire and heat sources.
Precautions
- Water seepage and falling are not allowed.
- To prevent danger, use it in the correct position.
Product images
- Risk of Electric Shock. RISQUE DECHOC ÉLECTRIQUE.
- For indoor use only. POUR UNE UTILISATION EN INTÉRIEUR.
- The plug is used as disconnect device. The socket outlet shall be installed near the equipment and shall be easily accessible.
Normal environmental conditions
- Altitude up to 5000m
- Temperature 40°C
FCC Warning Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Caution: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To satisfy FCC RF exposure requirements, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during device operation. To ensure compliance, operations at closer than this distance iarenot recommended.
Frequently Asked Questions (FAQ)
Q: Can the wireless charger support different fast charging standards?
A: Yes, the wireless charger supports various fast charging standards
including 7.5W, 10W, and 15W.
Q: What are the recommended environmental conditions for using the product?
A: The product is designed for indoor use with a working temperature range
of -10°C to 60°C and a working humidity range of 30% to 80%.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>