Isage VU202R Portable Small Wireless Router Instructions
- September 20, 2024
- Isage
Table of Contents
Isage VU202R Portable Small Wireless Router
INTRODUCTION
VU202R Router is exquisite,portable and small wireless router which designed for those who use mobile devices like smart phone, PADs, notebook to surf the internet. Minibox V1.0 Router has 2FE RJ45 ports which support both wired connection and wireless connection at the same time.it allows users not only able to share their internet by wired connection but also wireless connection.
VU202R Router comply with internet standard IEEE802.11b,IEEE802.11g and IEEE802.11n, maximum wireless rate can reach to 150Mbps ,with 1×2 MIMOtechnology, the range of transmission is 8 times than that of original IEEE802.11g standard, wireless signal is more Powerful ,wider extension. More then three colours can be choice,white, black, blue and etc….
FEATURES
- CPU: AR9331 Mips 24Kc 400MHz.
- DDR: 64MB
- Flash: 16MB (8MB/16MB optional)
- Compatible with IEEE 802.11 b/g/n.Wireless speed up to 150 Mbps.
- Compact and portable, small enough to take on the road.
- Powered through a 5V Micro USB port by an external power adapter.
- Compatible with almost all 2.4GHz WiFi devices.
- Supports AP, Router, Client, Bridge operations modes.
- Supports WEP, WPA/WPA2,WPA-PSK/WPA2-PSK encryptions.
- 1 * USB Port(Optional).
- 1 * System Status LED
- 1 *10/100Mbps WAN Port
- 1 * 10/100Mbps LAN Port
- Size: 64mm x 44.5mm x22.3mm.
- Antenna Type: Built-in smart omnidirectional antenna.
- More then three colours can be choice,white, black, blue and etc…
- Supported by Openwrt/LEDE.
- Can Sale PCBA, Casing and PCBA + Casing.
Interface| 1 10/100Mbps WAN Port
---|---
1 10/100Mbps LAN Port
1 USB Port
1 RESET Button
1 System Status LED
1 UART console(in the case)
1 Micro USB (5V/0.5A Input)
Wireless Standards| IEEE 802.11b/g/n
Indicator| System
Antenna Type| Built-in smart omnidirectional antenna
Dimensions| 64mm x 44.5mm x22.3mm
CPU| AR9331
DDR2| 64MB
Frequency| 2.4～2.484GHz
Signal Rate| 11n: Up to 135Mbps(dynamic)
11g: Up to 54Mbps(dynamic)
11b: Up to 11Mbps(dynamic)
EIRP| <20dBm (EIRP)
Reception Sensitivity| 135M:-70dBm@10%PER
65M:-73 dBm@10%PER
54M:-76 dBm@10%PER
Wireless Modes| AP Mode, Router Mode
Wireless Functions| Enable/Disable Wireless Radio, WDS Bridge, WMM, Wireless Statistics
Wireless Security| 64/128/152-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK
WAN Type| Dynamic IP/Static IP/PPPoE/ PPTP/L2TP
DHCP| Server, Client, DHCP Client List, Address Reservation
Quality of Service| WMM, Bandwidth Control
Port Forwarding| Virtual Server, Port Triggering, UPnP, DMZ
Dynamic DNS| DynDns, Comexe, NO-IP
VPN Pass-Through| PPTP, L2TP, IPSec (ESP Head)
Access Control| Local Management Control, Host List, Access Schedule, Rule Management
Firewall Security| DoS, SPI Firewall IP Address Filter/MAC Address Filter/Domain Filter IP and MAC Address Binding
Management| Access Control Local Management Remote Management
Certification| CE, FCC, RoHS
System Requirements| Microsoft® Windows® 98SE, NT, 2000, XP, Vista™ or Windows 7, MAC® OS, NetWare®, UNIX® or Linux
Environment| Operating Temperature: 0℃~40℃ (32℉~104℉)
Storage Temperature: -40℃~70℃ (-40℉~158℉)
Operating Humidity: 10%~90%
non-condensing Storage Humidity: 5%~90% non-condensing
PICTURES(PCBA)
CASING-WHITE
CASING-BLACK
CASING-BLUE
STRUCTURE
| Length| Width| Height
---|---|---|---
Size| 64mm| 44.5mm| 22.3mm
OPERATING ENVIRONMENT
- Working temperature: 0 ℃ to 40 ℃;
- Storage Temperature: -40℃~70℃ (-40℉~158℉)
- Humidity: 10% to 90%RH;
- non-condensing Storage Humidity: 5%~90% non-condensing
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>