Lenovo 63FFMAR1WWThinkVision T24d-30 Computer Monitor User Guide

63FFMAR1WWThinkVision T24d-30 Computer Monitor

“`html

Specifications

• Model: ThinkVision T24d-30
• Machine Types: 63FFMAR1WW
• Product Numbers: A24240WT0 63FFMAR1WW
• Unit Weight: 5.14 Kg

Product Usage Instructions

Chapter 1: Getting Started

This User’s Guide provides detailed operation instructions for
the user. For a quick instruction overview, please refer to the
Setup Poster for brief information. T24d-30 supports Lenovo
Accessories and Display Manager-ThinkColour.

Shipping Contents:

• USB A-B cable
• HDMI cable

Note: The actual transfer rate using the USB connectors may
vary based on system configuration and operating
environments.

Chapter 2: Adjusting and Using Your Monitor

Notice for Use: To set up your monitor, please
refer to the illustrations provided. Avoid touching the monitor
within the screen area to prevent damage.

FAQ

Q: Where can I find online technical support for the

ThinkVision T24d-30 monitor?

A: You can access online technical support by
visiting Lenovo’s official website at
http://www.lenovo.com/support.

“`

ThinkVision T24d-30 User Guide
Machine Types: 63FFMAR1WW

Product numbers
A24240WT0 63FFMAR1WW
First Edition (April 2024) © Copyright Lenovo 2024 LENOVO products, data, computer software, and services have been developed exclusively at private expense and are sold to governmental entities as commercial items as defined by 48 C.F.R. 2.101 with limited and restricted rights to use, reproduction and disclosure. LIMITED AND RESTRICTED RIGHTS NOTICE: If products, data, computer software, or services are delivered pursuant a General Services Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925.
i

Contents
Safety information ……………………………………………………………………………… iv
General Safety guidelines………………………………………………………………………………….iv
Chapter 1.Getting started ………………………………………………………………….1-1
Shipping contents …………………………………………………………………………………………..1-1 Notice for use………………………………………………………………………………………………….1-2 Product overview…………………………………………………………………………………………….1-3 Setting up your monitor …………………………………………………………………………………..1-5 Registering your option …………………………………………………………………………………..1-9
Chapter 2.Adjusting and using your monitor ……………………………………..2-1
Comfort and accessibility ………………………………………………………………………………..2-1 Adjusting your monitor image………………………………………………………………………….2-3 Selecting a supported display mode ………………………………………………………………..2-7 Understanding power management………………………………………………………………….2-8 Caring for your monitor …………………………………………………………………………………..2-9 Detaching the monitor base and stand …………………………………………………………….2-9 Wall Mounting (Optional) …………………………………………………………………………………2-9
Chapter 3.Reference information……………………………………………………….3-1
Monitor specifications……………………………………………………………………………………..3-1 Troubleshooting………………………………………………………………………………………………3-3 Manually installing the monitor driver………………………………………………………………3-5 Service information …………………………………………………………………………………………3-6
Appendix A. Service and Support…………………………………………………….. A-1
Registering your option …………………………………………………………………………………. A-1
ii

Online technical support………………………………………………………………………………… A-1 Telephone technical support …………………………………………………………………………. A-1
Appendix B.Notices…………………………………………………………………………. B-1
Recycling information ……………………………………………………………………………………. B-2 Trademarks……………………………………………………………………………………………………. B-3 Power cords and power adapters …………………………………………………………………… B-3
iii

Safety information
General Safety guidelines
For tips to help you use your computer safely, go to: http://www.lenovo.com/safety
Before installing this product, read the Safety Information.
Before installing this product, read the Safety Information.
.
, . Ped instalací tohoto produktu si pectte bezpecnostní informace. Før du dette tages i brug produkt, skal du læse sikkerhedsoplysningerne. Lesen Sie die Sicherheitshinweise, bevor Sie das Gerät installieren. , . Antes de instalar este producto, lea la Información de seguridad. Ennen kuin asennat tämän tuotteen, lue Turvallisuustiedot. Avant d’installer ce produit, lisez les Informations de sécurité.
. , Prije ugradnje proizvoda procitajte obavijesti o sigurnosti. A termék használatba vétele eltt olvassa el a biztonsági tudnivalókat. Sebelum memasang produk ini, baca Informasi Keselamatan. Prima di installare il prodotto, leggere le informazioni sulla sicurezza. . Lees de veiligheidsinformatie voorafgaand aan het installeren van dit product. Les sikkerhetsinformasjonen før du installerer produktet. Przed instalacj tego produktu naley przeczyta Informacje dotyczce bezpieczestwa. Antes de instalar este produto, leia as Informações de segurança. Antes de instalar este produto, leia as Informações de Segurança. Înainte de a instala acest produs, citii informaiile privind sigurana. ” “. Pred instaláciou tohto výrobku si precítajte bezpecnostné informácie. Pred namestitvijo tega izdelka preberite varnostne informacije. Pre instaliranja ovog proizvoda, procitajte Bezbednosne informacije. Läs säkerhetsinformation innan du installerar den här produkten. Bu ürünü kurmadan önce Güvenlik Bilgilerini okuyun. , . “”
The unit weight 5.14Kg
iv

Chapter 1.Getting started
This User’s Guide provides detailed operation instructions for the user. For quick instruction overview, please see the Setup Poster for brief information. T24d-30 supports Lenovo Accessories and Display Manager-ThinkColour.
Shipping contents
The product package should include the following items: · Information Flyer · Flat Panel Monitor · Power Cord · DP Cable(Optional) · HDMI Cable(Optional) · USB 3.0 Cable · Base · Stand

• USB A-B

HDMI

*: Depending on many factors such as the processing capability of peripheral devices, file attributes, and other factors related to system configuration and operating environments, the actual transfer rate using the various USB connectors on this device will vary and is typically slower than the data rates as defined by the respective USB specifications: – 5 Gbit/s for USB 3.1 Gen 1; 10 Gbit/s for USB 3.1 Gen 2 & 20 Gbit/s for USB 3.2.
Chapter 1.Getting started 1-1

Notice for use
To set up your monitor, please see the illustrations below. Note: Do not touch the monitor within the screen area. The screen area is glass and can be damaged by rough handling or excessive pressure.
1. Take out the Top cushion and accessories. 2. Mounting the stand to monitor’s recess.
· Insert the three tabs on the upper part of the stand to the groove on the back of the monitor. · Press the stand down till it snaps into place. 3. Insert the base towards the stand and tighten the thumbscrew. 4. Stand up the monitor with both hands carefully. Note: To install a VESA mount, please see “Wall Mounting (Optional)”on page 2-9.
1-2 T24d-30 Flat Panel Monitor User’s Guide

Product overview
This section will provide information on adjusting monitor positions, setting user controls, and using the cable lock slot.
Types of adjustments Tilt
Please see the illustration below for an example of the tilt range.
5° 0° 23.5°

Swivel
With the built-in pedestal, you can tilt and swivel the monitor for the most comfortable viewing angle.

45o

45o

Height Adjustment
For height adjustment, user needs to press down or lift up the monitor.
155mm

Chapter 1.Getting started 1-3

Monitor
– Adjust the screen position before rotating the monitor screen. (Make sure that the monitor screen ascent to its highest point, and it inclines backward at 23.5°.) – then rotate clockwise until the monitor stops at 90°.

5° 0° 23.5°

0°

0°

155mm

Monitor controls
The keypad controls on the back cover are accesses to various functions.

For information on how to utilize these keypad controls, please see “Adjusting your monitor image”on page 2-3.
Cable lock slot
Your monitor is equipped with a cable lock slot located on the rear of your monitor

1-4 T24d-30 Flat Panel Monitor User’s Guide

Setting up your monitor
This section provides information on how to set up your monitor.
Connecting and turning on your monitor
Note: Be sure to read the Safety information on page iv before carrying out this procedure. 1. Power off your computer and all attached devices, and unplug the computer
power cord.
2. Connect the cables according to below icon indication.
3. For computer in DisplayPort connecting. For other regions Lenovo recommends that customers who require to use the DP Cable on their monitor purchase the “Lenovo DisplayPort to DisplayPort Cable 0A36537” www.lenovo.com/support/monitor accessories.
Chapter 1.Getting started 1-5

4. For computer in HDMI connecting. Lenovo recommends that customers who require to use the HDMI input on their monitor purchase the “Lenovo HDMI to HDMI cable OB47070” www.lenovo.com/support/monitor accessories.
5. For computer in Analog Signal Cable connecting.
6. Connect one end of the USB cable to the USB upstream terminal on the back of the monitor,and connect the other end of the USB cable to an appropriate USB port on your computer.

• 1-6 T24d-30 Flat Panel Monitor User’s Guide

7. Connect one end of the USB cable to the USB downstream terminal of the monitor,and connect the other end of the USB cable to an appropriate USB port on your device. Note1: The USB downstream port does not provide power while the monitor switch is off. Note2: The USB downstream port provide power while connecting upstream cable in on mode or standby mode.

• 8. Connet the audio cable of the sound box and the audio jack of the monitor to transmit audio sources from DP and HDMI. Note: The audio output in Display Port, HDMI modes. Please be aware that excessive and/or extreme volume might damage your hearing ability.
  9. Insert the power cord into the monitor, then plug the monitor power cord and the computer cord into grounded electrical outlets. Note: A certified power supply cord has to be used with this equipment. The relevant national installation and or equipment regulations shall be considered. A certified power supply cord not lighter than ordinary polyvinyl chloride flexible cord according to IEC 60227 (designation H05VV-F 3G 0.75mm2 or H05VVH2-F2 3G 0.75mm2 ) shall be used. Alternative a flexible cord be of synthetic rubber according to IEC 60245 (designation H05RR-F 3G 0.75mm2 ) shall be used.
  Chapter 1.Getting started 1-7

10. Connect the cables with cable clip.
11. Power on the monitor and the computer.
12.When you install the monitor driver, download the driver that corresponds to your monitor model from the Lenovo website https://pcsupport.lenovo.com/ solutions/t24d_30. Refer to the “Manually installing the monitor driver”on page 3-5 section to install the driver.
1-8 T24d-30 Flat Panel Monitor User’s Guide

Registering your option
Thank you for purchasing this LenovoTM product. Please take a few moments to register your Product and provide us with information that will help Lenovo to better serve you in the future. Your feedback is valuable to us in developing product and services that are important to you, as well as in developing better ways to communicate with you. Register your option on the following Web site: http://www.lenovo.com/register Lenovo will send you information and updates on your registered product unless you indicate on the Web site questionnaire that you do not want to receive further information.
Chapter 1.Getting started 1-9

Chapter 2.Adjusting and using your monitor
This section will give you information on adjusting and using your monitor.
Comfort and accessibility
Good ergonomic practice is important to get the most from your personal computer and to avoid discomfort. Arrange your workplace and the equipment you use to suit your individual needs and the kind of work that you perform. In addition, use healthy work habits to maximize your performance and comfort while using your computer. For more detailed information on any of these topics, visit the Healthy Computing Web site at: http://www.lenovo.com/healthycomputing/.
Arranging your work area
Use a work surface of appropriate height and available working area to allow you to work in comfort. Organize you work area to match the way you use materials and equipment. Keep your work area clean and clear for the materials that you typically use and place the items that you use most frequently, such as the computer mouse or telephone, within the easiest reach. Equipment layout and setup play a large role in your working posture. The following topics describe how to optimize equipment setup to achieve and maintain good working posture.
Positioning and viewing your monitor
Position and adjust your computer monitor for comfortable viewing by considering the following items:
· Viewing distance: Recommended viewing distance between the eye and the monitor screen is 1.5 x the diagonal of the screen. Solutions in meeting this required distance in cramped office situations include pulling desk away from wall or divider to make room for monitor, using flat panel or compact displays placing the monitor in the desk corner, or placing the keyboard in an adjustable drawer to create a deeper working surface.
· Monitor height: Position the monitor so your head and neck are in a comfortable and neutral (vertical, or upright) position. If your monitor does not have height adjustments, you might have to place books or other sturdy objects under the base of the monitor to achieve the desired height. A general guideline is to position the monitor such that the top of the screen is at or slightly below your eye-height when you are comfortably seated. However, be sure to optimize your monitor height so the line of site between your eyes and the center the monitor suits your preferences for visual distance and comfortable viewing when your eye muscles are in a relaxed state.
· Tilt: Adjust the tilt of your monitor to optimize the appearance of the screen content and to accommodate your preferred head and neck posture.
· General location: Position your monitor to avoid glare or reflections on the screen from overhead lighting or nearby windows.
2-1 T24d-30 Flat Panel Monitor User’s Guide

The following are some other tips for comfortable viewing of your monitor: · Use adequate lighting for the type of work you are performing. · Use the monitor brightness, contrast, and image adjustment controls, if equipped,
to optimize the image on your screen to meet your visual preferences. · Keep your monitor screen clean so you can focus on the screen’s contents.
Any concentrated and sustained visual activity can be tiring for your eyes. Be sure to periodically look away from your monitor screen and focus on a far object to allow your eye muscles to relax. If you have questions on eye fatigue or visual discomfort, consult a vision care specialist for advice.
Quick tips for healthy work habits
The following information is a summary of some important factors to consider to help you remain comfortable and productive while you use your computer. · Good posture starts with equipment setup: The layout of your work area and
the setup of your computer equipment have a large effect on your posture while using your computer. Be sure to optimize the position and orientation of your equipment by following the tips outlined in “Arranging your work area”on page 2-1so you can maintain a comfortable and productive posture. Also, be sure to use the adjustment capabilities of your computer components and office furniture to best suit your preferences now and as your preferences change over time. · Minor changes in posture can help avoid discomfort: The longer you sit and work in front of your computer, the more important it is to observe your working posture. Avoid as summing any one posture for an extended period of time. Periodically make minor modifications in your posture to help deter any discomforts that might arise. Make use of any adjustments that your office furniture or equipment provide to accommodate changes in posture · Short, periodic breaks help ensure healthy computing: Because computing is primarily a static activity, it is particularly important to take short breaks from your work. Periodically, stand up in front of your work area, stretch, walk for a drink of water, or otherwise take a short break from using your computer. A short break from work gives your body a welcome change in posture and helps to ensure you remain comfortable and productive while you do work.
Accessibility information
Lenovo is committed to providing greater access to information and technology to people with disabilities. With assistive technologies, users can access information in the way most appropriate to their disability. Some of these technologies are already provided in your operating system; others can be purchased through vendors or accessed at: https://lenovo.ssbbartgroup.com/lenovo/request_vpat.php
Chapter 2.Adjusting and using your monitor 2-2

Adjusting your monitor image
This section describes the user control features used to adjust your monitor image.
Using the direct access controls

The direct access controls can be used when the On Screen Display (OSD) is not displayed.

Table 2-1. Direct access controls

Icon Name

Description

Enter key

· Press to open main menu while there is no any OSD on the
screen. · Press to enter next level on main menu or sub menu , or
move backwards through the sub menus. · Press and hold for 10 seconds to Lock /un-Lock all menu.

Right key

· It is a shortcut for adjusting Color mode while there is no
OSD on the screen. · Press to enter sub menu.

Left Key · Press to move backwards through the sub menus.

Down Key

· It is a shortcut for changing Contrast setting while there is no
OSD on the screen. · Press to move lighting-indicator on main menu down to next
one. · Press to decrease current values on adjustment bar

Up Key

· It is a shortcut for adjusting Brightness while there is no
OSD on the screen. · Press to move lighting-indicator on main menu up to last
one. · Press to increase current values on adjustment bar.

Input Source

It is a shortcut for changing input signal while there is no OSD on the screen or on power-saving mode.

DDC-CI

Press and hold for 10 seconds to Enable/Disable the “DDC/ CI”.

Power button

Turns the monitor on/off. White indicates power on. Orange indicates standby/ power saving mode.

2-3 T24d-30 Flat Panel Monitor User’s Guide

Using the On-Screen Display(OSD) controls
To adjust the settings, the user controls can be viewed through the OSD.

T24d-30

Monitor contral Quick settings

Brightness Contrast Volume Dynamic contrast Over drive Color mode

Advanced settings

Input signal: HDMI

Resolution: 1920×1200

Refresh rate: 60Hz

To use the controls:

1. Press to open the main OSD menu.

2. Use or to move among the icons. Select an icon and press to access the selected function. If there is a sub-menu, you can move between options using or , then press to select that
function. Use or to make adjustments then press to save.

3. Press to move backwards through the sub-menus and exit from the OSD.

4. Press and hold for 10 seconds to lock the OSD. This will prevent accidental adjustments to the OSD. Press and hold for 10 seconds to unlock the OSD and allow adjustments to the OSD.

5. Enables DDC/CI by default. Use OSD Exit Key, Press and

hold

for 10 seconds to disable/enable DDC/CI function.

A message “DDC/CI disable” is shown on the screen.

6. The ENERGY STAR option resets all user settings to default values so that the monitor can meet the requirements of Energy Star.

Energy Star is an energy saving program for consumer electronics led by the U.S. government. It was launched in 1992 by EPA and DOE to reduce energy consumption and greenhouse gas emissions. Energy Star logo is a symbol of energy conservation and environmental protection. It improves the concept of energy efficiency of consumers and manufacturers, and effectively guides the market. The regulation of Energy Star improves energy efficiency and reduces air pollution by using more energy-efficient equipment in homes, offices and factories. One way to achieve this goal is to use management to reduce energy consumption when products are not in use. The default settings for monitors conform to Energy Star certification. Any changes by users for more features and functionalities may increase power consumption, which will exceed the limitation of Energy Star’s standard. If the user changes the options related to energy efficiency when using, such as brightness, color mode, etc., select All Reset Factory or choose the Energy Star option, the power consumption will be restored to the energy efficiency with Energy Star standard.
Chapter 2.Adjusting and using your monitor 2-4

For more information, please refer to (www.energystar.gov/products). All products of Energy Star will be posted online and can be accessed directly by governments, public institutions and consumers.

Table 2-2. OSD functions

OSD Icon on Main Menu

Sub menu

Description

Controls and Adjustments

Brightness Adjusts overall screen brightness.

Contrast

Adjusts difference between light and dark areas.

Volume

Adjust the value.

Dynamic Contrast

· Off · On

· Off

Over Drive · Normal

Monitor Controls

· Extreme · sRGB

· Neutral

· Warm

· Cool

Color Mode

· Custom
R: Increases or decreases the saturation of ‘red’ in the image. G: Increases or decreases the

saturation of ‘green’ in the image. B: Increases or decreases the
saturation of ‘blue’ in the image.

All input ports

Quick settings Port Settings

Right key Up key
Down key

· Brightness · Contrast · Color mode · Automatic · language

Input Signal
USB Charging DP Select Video range

· Auto
· DisplayPort
· HDMI · VGA
· On · Off Note: When the OSD USB Charging
selected On, USB downstream ports can support power charging for USB device on power-saving mode without connect USB 3.0 cable from computer to monitor.
· DP 1.2 · DP 1.1
· Auto · Full range 0-255 · Limited range 16-235 Note: Refers to RGB range of HDMI input.

Only for DP ports For HDMI port

2-5 T24d-30 Flat Panel Monitor User’s Guide

OSD Icon on Main Menu Advanced
settings
Menu settings

Sub menu

Description

Controls and Adjustments

Image Position

· H. Position · V. Position

Only for VGA

Image Setup

· Automatic · Manual

ports

Button repeat rate

· Default · Slow · Off

Aspect ratio

· Full Screen · Orginal AR

LED indicator

· On · Off Note: When the LED indicator is on, the LED
is on; when the LED indicator is off, the LED

is always off.

Power button · On

lock

· Off

· Model name

Information

· Refresh Rate · Firmware

Language

· Serial number
Select OSD Languages. Note: The language chosen only affects the language of the OSD. It has no effect on any software running on the

All input ports

computer.

OSD timeout Adjust bar 5~60

OSD position Adjust bar 0~100 (H,V)

OSD rotation

· Normal
· 90 · 270

Transparency 0 ~100

Factory reset

· Reset · No

*The use of Extreme Mode (response time) may result in reduced display quality when fast moving

video graphics are displayed.

Users should check Extreme Mode (response time) to verify if it is compatible with any applications

they would like to use it with.

Low Blue Light: The display uses the low blue light panel. It complies with TÜV Rheinland Low Blue

Light Hardware Solution certification under factory reset/default setting (Low Blue Light=Standard,

Brightness:75%, Contrast: 75%, CCT: Warm)

Chapter 2.Adjusting and using your monitor 2-6

Selecting a supported display mode
The display mode of the monitor uses is controlled by the computer. Therefore, refer to your computer documentation on how to change display modes. The image size, position and shape might be changed when the display mode
changes. This is normal and the image can be re-adjusted using automatic image setup and the image controls. Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or Flat Panel technology is inherently flicker-free. Note: If your system has previously been used with a CRT monitor and is currently
configured to a display mode outside the range of this monitor, you may need to reattach the CRT monitor temporarily until you have re-configured the system; preferably to 1920 x 1200 at 60 Hz, which is a common display mode. The display modes shown below have been optimized at the factory.

Note: According to the VESA standard, there may be a certain error (+/-1Hz) when calculating the refresh rate (field frequency) of different operating systems and graphics cards. In order to improve compatibility, the nominal refresh rate of this product has been rounded off. Please refer to the actual product.

Table 2-3 Factory set display modes Address ability 720 x 400 640 x 480 800 x 600 1024 x 768 832 x 624 1280 x 800 1280 x 1024 1366 x 768 1440 x 900 1600 x 900 1680 x 1050 1920 x 1080 1920 x 1200 480p 576p 720p 1080p

Refresh rate 70 Hz 60 Hz, 67 Hz,72 Hz, 75 Hz 60 Hz, 72 Hz, 75 Hz 60 Hz, 70 Hz, 75 Hz 75Hz 60 Hz 60 Hz, 75Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz, 75 Hz, 100 Hz 60 Hz, 75 Hz, 100 Hz 60 Hz 50 Hz 50 Hz, 60 Hz 50 Hz, 60 Hz

2-7 T24d-30 Flat Panel Monitor User’s Guide

Understanding power management
Power management is invoked when the computer recognizes that you have not using your mouse or keyboard for a user-definable period. There are several states as described in the table below. For optimal performance, switch off your monitor at the end of each working day, or whenever you expect to leave it unused for long periods during the day.

Table 2-4. Power indicator

State

Power Indicator

Screen

Restoring Operation

Compliance

On
Standby/ Suspend
Off

White Amber Off

Normal Blank Blank

Press a key or move the mouse. There may be a slight delay reappears. Note: Standby also occurs
if there is no image output to the monitor. Press power key to switch on There may be a slight delay before the image reappears.

ENERGY STAR ENERGY STAR

Power Management Modes

VESA Modes

Horizontal Sync

Vertical Sync

Video

Power Indicator

Power Consumption

Normal operation

Active

Active Active White

59.4 W (maximum)* 15 W (typical)

Active-off mode Inactive

Inactive Off

Amber Less than 0.5 W

Switch off

–

–

–

Off

Less than 0.3 W

Energy Star

Power Consumption

PON ETEC

12.2 W 38.49 kWh

** Maximum power consumption with max luminance.
This document is informational only and reflects laboratory performance. Your product may perform differently, depending on the software, components and
peripherals you ordered and shall have no obligation to update such information. Accordingly, the customer should not rely upon this information in making decisions about electrical tolerances or otherwise. No warranty as to accuracy or completeness is expressed or implied.

Chapter 2.Adjusting and using your monitor 2-8

Caring for your monitor
Be sure to turn off the power before you perform any maintenance on the monitor. Do not: · Apply water or liquid directly to your monitor. · Use solvents or abrasives. · Use flammable cleaning materials to clean your monitor or any other electrical
equipment. · Touch the screen area of your monitor with sharp or abrasive items. This type of
contact may cause permanent damage to your screen. · Use any cleaner which contains an anti-static solution or similar additives. This
may harm the coating of the screen area. Do: · Lightly dampen a soft cloth with water and use this to gently wipe the covers and
the screen. · Remove grease or finger marks with a damp cloth and a little mild detergent.
Detaching the monitor base and stand
Step 1: Place the monitor on a soft and flat surface. Step 2: Press and hold the stand release button. Step 3: Lift the stand up and away from the monitor.
Wall Mounting (Optional)
Refer to the instructions that come with the base mounting kit. To convert your LCD display from a desk-mounted to a wall-mounted display, do the following: Step 1: Verify that the Power button is turned Off, then disconnect the power cord. Step 2: Lay the LCD display face down on a towel or blanket.
2-9 T24d-30 Flat Panel Monitor User’s Guide

Step 3: Remove the base from the monitor, refer to “Detaching the monitor base and stand”.
Step 4: Attach the mounting bracket from the VESA compatible wall mounting kit (100mm x100mm distance), VESA Mounting Screw M4 x 12 mm.
VESA hole
Step 5: Attach the LCD display to the wall, and follow the instructions in the wallmounting kit. For use only with UL Listed Wall Mount Bracket with minimum weight/load: 8kg
Chapter 2.Adjusting and using your monitor 2-10

Chapter 3.Reference information
This section contains monitor specifications, instructions to manually install the monitor driver, troubleshooting information.

Monitor specifications

Table 3-1. Monitor specifications for type-model T24d-30/63FFMAR1WW

Dimensions

Depth

199.68 mm (7.86 in.)

Height

535.70 mm (21.09 in.)

Stand

Width Tilt

533.00 mm (20.98 in.) Range: -5o~23.5o

VESA mount

Supported

100 mm x 100 mm (3.94 in. x 3.94 in.)

Image

Viewable image size

60.96 cm (24 in.)

Maximum height

518.4 mm (20.4 in.)

Maximum width

324 mm (12.76 in.)

Pixel pitch

0.27 mm (0.01 in.)

Power input

Supply voltage

Max supply current Power consumption Normal operation

Note: Power
consumption figures Standby/Suspend are for the monitor and the power supply Off
combined.

Note: Typical power

consumption is tested

under OSD default

setting.

DP

Interface

100-240V AC 1.5A <59.4 W (Max) <15 W (Typical) <0.5 W <0.3 W at 100VAC and 240VAC
DP

Input signal

VESA TMDS (Panel LinkTM)

Horizontal addressability 1920 pixels (Max)

Vertical addressability 1200 lines (Max)

Clock frequency

300 MHz (Max)

3-1 T24d-30 Flat Panel Monitor User’s Guide

HDMI
VGA
Communications Supported Display Modes Temperature Humidity

Interface

HDMI

Input signal

VESA TMDS (Panel LinkTM)

Horizontal addressability 1920 pixels (Max)

Vertical addressability 1200 lines (Max)

Clock frequency

300 MHz (Max)

Interface

VGA

Input signal

VESA TMDS (Panel LinkTM)

Horizontal addressability 1920 pixels (Max)

Vertical addressability 1200 lines (Max)

Clock frequency

210 MHz (Max)

VESA DDC/CI

Horizontal frequency

28 kHz ­ 150 kHz

Vertical frequency

47 Hz ­ 100 Hz

Native Resolution

1920 x 1200@ 60 Hz

Operating

0° to 40°C (32°F to 104° F)

Storage

-20° to 60°C (-4°F to 140° F)

Shipping

-20° to 60°C (-4° F to 140° F)

Operating

10% to 80% non-condensing

Storage

5% to 95% non-condensing

Shipping

5% to 95% non-condensing

Chapter 3.Reference information 3-2

Troubleshooting

If you have a problem setting up or using your monitor, you might be able to solve
it yourself. Before calling your dealer or Lenovo, try the suggested actions that are appropriate to your problem. Table 3-2. Troubleshooting

Problem

Possible cause

Suggested action

Reference

The words” Out The system is set to a · If you are replacing an old “Selecting a

of Range” are display mode which is shown on the not supported by the screen, and the monitor power indicator is flashing white.

monitor, reconnect it and supported display adjust the display mode to mode”on page within the specified range 2-7 for your new monitor. · If using a Windows
system, restart the system

in safe mode, then select

a supported display mode

for your computer. · If these options do
not work, contact the Customer Support Centre.

The image

The video signal cable Be sure the signal cable “Connecting and

quality is

is not

is firmly plugged into the turning on your

unacceptable connected with the system and monitor.

monitor”on page

monitor or system

1-5

completely.

The color settings may Select another color setting “Adjusting your

be incorrect.

from the OSD menu.

monitor image”on

page 2-3

The automatic image Perform automatic image setup function was not setup. performed.

“Adjusting your monitor image”on page 2-3

The power

· The monitor’s

indicator is not lit power switch is

and there is no image.

not switched on. · The power
cord is loose or

disconnected.

· There is no power

at the outlet.

Screen is blank and power indicator is amber.

The monitor is in Standby / Suspend mode

The power

The video signal

indicator is

cable is loose or

amber, but there disconnected from the

is no image

system or monitor

· Be sure the power cord “Connecting and

is connected properly. · Be sure the outlet
has power. · Power on the monitor. · Try using another

turning on your monitor”on page 1-5

power cord. · Try using another
electrical outlet.

· Press any key on

“Understanding

the keyboard or

power

move the mouse to

management”on

restore operation.

page 2-8

· Check the Power options

settings on your computer.

Be sure the video cable is “Connecting and

connected with the system turning on your

properly

monitor”on page

1-5

The monitor brightness Adjust the brightness and “Adjusting your

and contrast are at the contrast setting on the OSD monitor image”on

lowest setting.

menu.

page 2-3

3-3 T24d-30 Flat Panel Monitor User’s Guide

Problem

Possible cause

Suggested action

One or more of This is a characteristic

the pixels appear of the LCD technology

discolored

and is not an LCD

defect

If there are more than five pixels missing, contact the
Support Center

Reference
“Appendix A. Service and Support”on page A-1

· Fuzzy lines in text or a blurryimage
· Horizontal or vertical
lines through
the image.

· Image setup has not been optimized
· Your system DisplayProperties setting have not been optimized.

Adjust the resolution settings “Adjusting your

on your system to match monitor image”on

the native resolution for this page 2-3

monitor: 1920 x 1200 at 60

Hz.

Perform automatic image “Selecting a

setup. If automatic image supported display

setup does not help, perform mode”on page

manual image setup.

2-7

When working in the native resolution, you may find additional improvements by adjusting the Dots Per Inch (DPI) setting on your system.

See the Advanced section of your system’s display properties.

Chapter 3.Reference information 3-4

Manually installing the monitor driver
Below are steps for manually installing the monitor driver in Microsoft Windows 10, Microsoft Windows 11. 1. Turn off the computer, all attached devices. 2. Ensure that the monitor is connected correctly. 3. Turn on the monitor and then the system unit. Allow your computer to start the
Windows operating system. 4. From the Lenovo website https://pcsupport.lenovo.com/solutions/t24d_30, find
the corresponding monitor driver and download it to a PC to which this monitor is connected (such as a desktop). 5. Right-click the Windows Start button on the desktop, then click Device Manager, and double click Monitor. 6. Double- click Generic Monitor. 7. Click the Driver tab. 8. Click Update Driver, and then click Browse Computer to find the driver. 9. Click Let me pick from a list of available divers on my computer. 10.Click the Have Disk… button. By clicking the Browse button, browse and point to the following path: X:Monitor DriversWindows (where X indicates “the folder in which the downloaded driver is located” (such as a desktop)). 11. Select t24d-30.inf file, Click Open button. Click OK button. 12.In the new window, select T24d-30 and click Next. 13.After the installation is complete, delete all downloaded files and close all Windows. 14.Restart the system. The system will automatically select the refresh rate and the corresponding color matching profile.
3-5 T24d-30 Flat Panel Monitor User’s Guide

Service information
Customer responsibilities
The warranty does not apply to a product which has been damaged due to accident, misuse, abuse, improper installation, usage not in accordance with product specifications and instructions, natural or personal disaster, or unauthorized alterations, repairs or modifications. The following are examples of misuse or abuse and not covered by warranty: · Images burned on to the screen of a CRT monitor. Burned image is preventable
by utilizing a moving screen saver or power management. · Physical damage to covers, bezel, base and cables. · Scratches or punctures on monitor screens.

Service parts
The following parts are for use by Lenovo service, or Lenovo aurthorized dealers, to support the customer warranty. Parts are for service use only. The table below shows information for model 63FFMAR1WW.

Table 3-3. Repair parts list (A24240WT0)

FRU (FIELD REPLACEABLE UNIT) PART NUMBER

Description

5D11P36194

T24d-30 – 24 inch FRU Monitor (HDMI)

5C11P37206

T24d-30 USB Type-A to B cable 1.8m

Machine Type/Model (MTM)
63FF
63FF

5C10X78209

T24d-30 DP cable 1.8m

63FF

5C10W69741

T24d-30 HDMI cable 1.8m

63FF

5SE1P38204

T24d-30 – FRU Stand and Base 63FF

Color
Raven Black
Raven Black
Raven Black
Raven Black
Raven Black

Chapter 3.Reference information 3-6

Appendix A. Service and Support
The following information describes the technical support that is available for your product, during the warranty period or throughout the life of the product. Refer to your Lenovo Statement of Limited Warranty for a fully explanation of Lenovo warranty terms.

Registering your option
Register to receive product service and support updates, as well as free and discounted computer Accessories and content. Go to: http://www.lenovo.com/ support

Online technical support
Online technical support is available during the life of your product through the Lenovo Support Web site at http://www.lenovo.com/ support
Product replacement assistance or exchange of defective components also is available during the warranty period, assistance for replacement or exchange of defective components is available. In addition, if your option is installed in a Lenovo computer, you might be entitled to service at your location. Your technical support representative can help you determine the best alternative.

Telephone technical support
Installation and configuration support through the Customer Support Center will be available until 90 days after the option has been withdrawn from marketing. After that time, the support is cancelled, or made available for a fee, at Lenovo’s discretion. Additional support is also available for a nominal fee.
Before contacting a Lenovo technical support representative, please have the following information available: option name and number, proof of purchase, computer manufacturer, model, serial number and manual, the exact wording of any error message, description of the problem, and the hardware and software configuration information for your system.
Your technical support representative might want to walk you through the problem while you are at your computer during the call.
Telephone numbers are subject to change without notice. The most up-to-date telephone list for Lenovo Support is always available at: http://consumersupport. lenovo.com

Country or Region Argentina
Australia
Austria
Belgium

Telephone Number 0800-666-0011 (Spanish, English) 1-800-041-267 (English ) 0810-100-654 (local phone) (German) Warrant service and support: 02-339-36-11 (Dutch, French)

A-1 T24d-30 Flat Panel Monitor User’s Guide

Country or Region Bolivia
Brazil
Brunei Darussalam

Telephone Number
0800-10-0189 ( Spanish) Calls made from within the Sao Paulo region: 11-3889-8986 Calls made from outside the Sao Paulo region: 0800-701-4815 (Portuguese)
800-1111 (English)

Canada

1-800-565-3344 (English, French)

Chile

800-361-213(Spanish )

China
China (Hong Kong S.A.R.) China (Macau S.A.R.)
Colombia

Technical Support Line: 400-100-6000 (Mandarin)
(852) 3516-8977 (Cantonese, English, Mandarin) 0800-807 / (852) 3071-3559 (Cantonese, English, Mandarin)
1-800-912-3021 (Spanish)

Costa Rica

0-800-011-1029( Spanish )

Croatia

385-1-3033-120(Croatian)

Cyprus

800-92537(Greek)

Czech Republic

800-353-637(Czech)

Denmark

Warranty service and support: 7010-5150 (Danish)

Dominican Republic 1-866-434-2080(Spanish )

Ecuador Egypt El Salvador Estonia Finland

1-800-426911 (OPCION 4) (Spanish )
Primary: 0800-0000-850 Secondary:0800-0000-744 (Arabic, English)
800-6264 (Spanish)
372-66-0-800 (Estonian, Russian, English)
Warranty service and support: +358-800-1-4260(Finnish)

France

Warranty service and support (hardware): 0810-631-213(French)

Germany

Warranty service and support: 0800-500-4618 (toll-free)(German)

Greece Guatemala Honduras

Lenovo Business Partner (Greek)
Dial 999-9190, wait for operator, and request to reach 877-404-9661 (Spanish)
Dial 800-0123(Spanish)

Hungary India

+36-13-825-716 (English, Hungarian)
Primary: 1800-419-4666 (Tata) Secondary: 1800-3000-8465 (Reliance) Email: commercialts@lenovo.com (English and Hindi)

Appendix A. Service and Support A-2

Country or Region Indonesia
Ireland Israel Italy Japan Kazakhstan Korea Latvia Lithuania Luxembourg Malaysia Malta Mexico Netherlands New Zealand Nicaragua Norway Panama Peru Philippines
Poland
Portugal Romania
Russia
Singapore
Slovakia
A-3 T24d-30 Flat Panel Monitor User’s Guide

Telephone Number
1-803-442-425 62 213-002-1090 (Standard Charges Apply) (English, Bahasa Indonesia)
Warranty service and support: 01-881-1444 (English) Givat Shmuel Service and Center: +972-3-531-3900 (Hebrew, English)
Warranty service and support: +39-800-820094 (Italian) 0120-000-817 (Japanese, English)
77-273-231-427(Standard charges Apply) (Russian , English) 080-513-0880 (Collect Call) 02-3483-2829 (Toll Call) (Korean) 371-6707-360(Latvian, Russian, English)
370 5278 6602(Italian, Russian, English ) ThinkServer and ThinkStation: 352-360-385-343 ThinkCentre and ThinkPad: 352-360-385-222 (French) 1-800-88-0013 03-7724-8023 (Standard Charges Apply) (English) 356-21-445-566(English, Italian, Maltese Arabic)
001-866-434-2080(Spanish)
020-513-3939 (Dutch)
0508-770-506 (English )
001-800-220-2282 (Spanish)
8152-1550(Norwegian) Lenovo Customer Support Center: 001-866-434(Toll-Free) (Spanish)
0-800-50-866 (OPCION 2) (Spanish) 1-800-8908-6454 (GLOBE subscribers) 1-800-1441-0719 (PLDT subscribers) (Tagalog, English) Laptops and tablets branded with logo Think: 48-22-273-9777 ThinkStation and ThinkServer: 48-22-878-6999 (Polish, English )
808-225-115 (Standard Charges Apply) (Portuguese)
4-021-224-4015(Romanian) +7-499-705-6204 +7-495-240-8558 (Standard Charges Apply)(Russian) 1-800-415-5529 6818-5315 (Standard Charges Apply) (English, Mandarin, Bahasa Malaysia)
ThinkStation and ThinkServer: 421-2-4954-5555

Country or Region Slovenia Spain Sri Lanka Sweden Switzerland Taiwan Thailand Turkiye United Kingdom United States Uruguay Venezuela Vietnam

Telephone Number
386-1-2005-60 (Slovenian)
34-917-147-833(Spanish)
+9477-7357-123 (Sumathi Information systems) (English)
Warranty service and support: 077-117-1040 (Swedish) Warranty service and support: 0800-55-54-54 (German, French, Italian) 0800-000-702 (Mandarin) 001-800-4415-734 (+662) 787-3067 (Standard Charges Apply)(Thai, English) 444-04-26 (Turkish) Standard warranty support: 03705-500-900 ( local rate) Standard warranty support: 08705-500-900(English) 1-800-426-7378 (English)
000-411-005-6649 (Spanish)
0-800-100-2011 (Spanish) 120-11072 (Toll Free) 84-8-4458-1042 (Standard Charges Apply) (Vietnamese, English)

Appendix A. Service and Support A-4

Appendix B.Notices
Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual property right may be used instead. However, it is the user’s responsibility to evaluate and verify the operation of any other product, program, or service. Lenovo may have patents or pending patent applications covering subject matter described in this document. The furnishing of this document does not give you any license to these patents. You can send license inquiries, in writing to:
Lenovo (United States), Inc. 1009 Think Place – Building One Morrisville, NC 27560 U.S.A. Attention: Lenovo Director of Licensing
LENOVO PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Some jurisdictions do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you.
This information could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. Lenovo may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time without notice.
The products described in this document are not intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. The information contained in this document does not affect or change Lenovo product specifications or warranties. Nothing in this document shall operate as an express or implied license or indemnity under the intellectual property rights of Lenovo or third parties. All information contained in this document was obtained from specific environments and presented as an illustration. The result obtained in other operating environments may vary.
Lenovo may use or distribute any of the information you supply in any way it believe appropriate without incurring any obligation to you.
Any references in this publication to non-Lenovo Web sites are provided for convenience only and do not in any manner serve as an endorsement of those Web sites. The materials at those Web sites are not part of the materials for this Lenovo product, and use of those Web sites is at your own risk.
Any performance data contained herein was determined in a controlled environment. Therefore, the result obtained in other operating environments may vary significantly. Some measurements may have been made on developmentlevel systems and there is no guarantee that these measurements will be the same on generally available systems. Furthermore, some measurements may have been estimated through extrapolation. Actual results may vary. Users of this document should verify the applicable data for their specific environment.
B-1 T24d-30 Flat Panel Monitor User’s Guide

Recycling information
Lenovo encourages owners of information technology (IT) equipment to responsibly recycle their equipment when it is no longer needed. Lenovo offers a variety of programs and services to assist equipment owners in recycling their IT products. For information on recycling Lenovo products, go to: http://www.lenovo.com/recycling
https://www.lenovo.com/jp/ja/services_warranty/recycle/pcrecycle/
https://www.lenovo.com/jp/ja/services_warranty/recycle/pcrecycle/
Collecting and recycling a disused Lenovo computer or monitor If you are a company employee and need to dispose of a Lenovo computer or monitor that is the property of the company, you must do so in accordance with the Law for Promotion of Effective Utilization of Resources. Computers and monitors are categorized as industrial waste and should be properly disposed of by an industrial waste disposal contractor certified by a local government. In accordance with the Law for Promotion of Effective Utilization of Resources, Lenovo Japan provides, through its PC Collecting and Recycling Services, for the collecting, reuse, and recycling of disused computers and monitors. For details, visit the Lenovo Web site at https://www.lenovo.com/jp/ja/services_warranty/recycle/pcrecycle/. Pursuant to the Law for Promotion of Effective Utilization of Resources, the collecting and recycling of home-used computers and monitors by the manufacturer was begun on October 1, 2003. This service is provided free of charge for home- used computers sold after October 1, 2003. For details, visit the Lenovo Web site at https://www.lenovo.com/jp/ja/services_warranty/recycle/personal/. Disposing of Lenovo computer components Some Lenovo computer products sold in Japan may have components that contain heavy metals or other environmental sensitive substances. To properly dispose of disused components, such as a printed circuit board or drive, use the methods described above for collecting and recycling a disused computer or monitor.
Appendix B. Notices B-2

Trademarks
The following terms are trademarks of Lenovo in the United States, other countries, or both:
Lenovo The Lenovo logo ThinkCentre ThinkPad ThinkVision Microsoft, Windows, and Windows NT are trademarks of the Microsoft group of companies. Other company, product, or service names may be trademarks or service marks of others.
Power cords and power adapters
Use only the power cords and power adapters supplied by the product manufacturer. Do not use the AC power cord for other devices.
B-3 T24d-30 Flat Panel Monitor User’s Guide

References

• Lenovo Official US Site | Laptops, PCs, Tablets & Servers | Lenovo US
• Energy Efficient Products | ENERGY STAR
• Lenovo Official US Site | Laptops, PCs, Tablets & Servers | Lenovo US
• lenovo.com/healthycomputing/
• Regulatory Compliance | Personal Computer Safety | Lenovo US
• lenovo.com/support/monitor
• Official Lenovo Laptop, Accessories & PC Support - Lenovo Support US
• ThinkVision T24d-30 - Overview - Lenovo Support US

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>