IKEA TRADFRI 10 W Driver for Wireless Control Instruction Manual

IKEA TRADFRI 10 W Driver for Wireless Control

Specifications:

• Type: ICPSHC24-10CN-IL-2
• Input: 220-240 VAC, 50/60 Hz, 0.1 A
• Output: 24.0V DC
• Max total load: 0.42 A, 10.0 W
• Radio range: 10 m in open air
• Operating frequency: 2405-2480 MHz
• Output power (EIRP): 8 dBm

Product Usage Instructions

Pairing a Steering Device:

1. Connect at least one product to the mains and ensure mains power is turned ON.
2. Locate the pairing symbol on the LED driver and hold the steering device within 5 cm of the symbol.
3. Press and hold the pairing button on the steering device for at least 10 seconds until a red LED light shines steadily.
4. The product will dim and flash once to indicate successful pairing with the steering device.

Care Instructions:
To clean the unit, wipe with a dry soft cloth. Avoid abrasive cleaners or chemical solvents as they can damage the product.

Product Servicing:
Do not attempt to repair the product yourself as it may expose you to dangerous voltage points. Contact a professional for servicing.

How to Factory Reset Your Driver:
If the product is unresponsive or needs to be unpaired from a steering device, perform a factory reset by pressing and holding the small reset button on the LED driver enclosure with a pen tip.

FAQ:

• Q: Can this product be used outdoors?
  A: No, this product is for indoor use only.

• Q: How do I dispose of this product?
  A: Dispose of the product separately from household waste. Contact your local IKEA store for recycling information.

“`

IKEA-TRADFRI-10-W-Driver-for-Wireless-Control-PRODUCT

10 W

Design and Quality IKEA of Sweden

If you have the TRÅDFRI gateway   or DIRIGERA hub

Go to App Store or Google Play and download the IKEA Home smart app. The app will take you through the process of installing your product and other devices.

How to steer your lighting

When the product is connected to the mains, it is possible to turn it ON/OFF with the main switch or the foot switch, but if you want to dim or connect your product to other IKEA Home smart products, you need to buy a separate steering device (e.g. a remote control).

The steering device needs to be paired with your wireless product. If you have more than one (1) wireless product, you can pair each one with the steering device so that the entire combination can be turned ON/OFF or dimmed at the same time.

Pairing a steering device to your product

1. Connect at least one (1) product to the mains before you begin the pairing. Make sure that the mains power is turned ON.
2. Locate the pairing symbol on the LED driver. Hold the steering device close to the pairing symbol (no more than 5 cm away).
3. Press and hold the pairing button on the steering device for at least 10 seconds. A red LED light will shine steadily on the steering device. The product will begin to dim and flash one time to indicate that it has being paired to the steering device.

How to factory reset your driver

If the product does not respond or if you want to un-pair the product from a steering device, you might have to perform a factory reset. The unit is forced to factory reset by carefully pushing and holding in the small button (marked RESET) with a tip of pen on the LED driver enclosure and applying slight pressure.

IMPORTANT!

• The product is for indoor use only and can be used in temperatures ranging from 5 °C to 45 °C.

• Do not leave the product in direct sunlight or near any heat source, as it may overheat
  The declared radio range between the unit and the steering device is measured in open air.

• Different building materials and placement of the units can affect the wireless connectivity range.

Care instructions

To clean the unit, wipe with a dry soft cloth. Never use abrasive cleaners or chemical solvents as this can damage the product.

PRODUCT SERVICING

Do not attempt to repair this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks.

Save these instructions for future use.

Technical data:

• Type: ICPSHC24-10CN-IL-2
• Input: 220-240 VAC, 50/60 Hz, 0.1 A
• Output: 24.0V DC
• Max total load: 0.42 A, 10.0 W
• R adio range : 10 m in open air.
• Operating frequency: 2405-2480 MHz
  Output power (EIRP): 8 dBm

Indoor use only

• Manufacturer : IKEA of Sweden AB
• Address: Box 702, SE-343 81 Älmhult, SWEDEN

The crossed-out wheeled bin symbol indicates that the item should be disposed of separately from household waste. The item should be handed in for recycling in accordance with local environmental regulations for waste disposal. By separating a marked item from household waste, you will help reduce the volume of waste sent to incinerators or land-fill and minimize any potential negative impact on human health and the environment. For more information, please contact your IKEA store.
© Inter IKEA Systems B.V. 2022 AA-2372069-2

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>